Sennheiser Evolution E 602-II User manual

602-II
Bedienungsanleitung
Instructions for use
Notice d‘emploi
Istruzioni per l‘uso
Instrucciones para el uso
Gebruiksaanwijzing
TitelSeite_Sp6.fm Seite 1 Donnerstag, 30. März 2006 1:58 13

3
602-II
The cardioid 602-II is a dynamic microphone especially
suitable for use with kick drums, bass guitar cabs, tubas
and other low frequency instruments.
Its lightweight high-performance voice coil construction
delivers fast transient signals. The low frequency
extension and mid band attenuation produce an ultra-
smooth pre-shaped signal. The microphone is ideal for
direct use on the most problematic bass signal sources.
Features
yRugged, lightweight aluminium body for stable
positioning on long microphone boom arms
yLightweight high-performance voice coil construction
for fast transient response
yLow frequency extension
y Ideal for direct use on the most problematic bass signal
sources
y Frequency-independent directivity provides effective
rejection of incidental rear noise
yHumbucking coil
yIntegral stand mount
e 602 II_US.fm Seite 3 Donnerstag, 30. März 2006 1:50 13

4
Delivery includes
y 602-II microphone
y Pouch
y Instructions for use
yWarranty Certificate
Removing the sound inlet basket
e 602 II_US.fm Seite 4 Donnerstag, 30. März 2006 1:50 13

5
Positioning the microphone
Kick drums
In order to prevent interference due to crosstalk between
adjacent sound sources, try to position the microphone so
that the interfering sound source is located in the angle
area of the highest cancellation of the microphone
(approx. 180°; see polar diagram).
Position Resulting sound Commentary
Much attack,
little resonance,
dry
Position the microphone
at a distance of a few
centimeters from the
batter head.
Less attack,
much resonance,
smooth,
voluminous
Position the microphone
at the level of the
resonant head.
Less attack Position the microphone
in the middle between
the batter head and the
re-sonant head. For less
attack in all three
positions,
turn the microphone
away from where the
beater strikes.
e 602 II_US.fm Seite 5 Donnerstag, 30. März 2006 1:50 13

6
Polar diagram
Frequency response curve
0°
5
10
15
20
25
dB
30°
60°
90°
30°
60°
90°
120°
150°
180°
150°
120°
2000 Hz
4000 Hz
8000 Hz
16000 Hz
125 Hz
250 Hz
500 Hz
1000 Hz
0
- 50
- 60
- 70
- 80
- 90 20 50 100 200 500 1000 2000 5000 10000 20000 Hz
0°, 1 m 0°, 5 cm
- 40
dBv
e 602 II_US.fm Seite 6 Donnerstag, 30. März 2006 1:50 13

7
Specifications
Transducer principle dynamic
Frequency response 20.....16,000 Hz
Pick-up pattern cardioid
Sensitivity 0.9 mV/Pa (at 50 Hz)
(free field, no load) 0.25 mV/Pa (at 1 kHz)
Nominal impedance (at 1 kHz) 350 Ω
Min. terminating impedance 1 kΩ
Connector XLR-3
Dimensions Ø 60 x L 153 mm
Weight 318 g
Pin assignment of XLR-3 connector
12 3
12
3
++
12 3
XLR
+
XLRXLR
+
e 602 II_US.fm Seite 7 Donnerstag, 30. März 2006 1:50 13

8
Overview of microphone applications
Variant
Application
e602-II e604 e606 e608 e614 e815 e825 e835 e840 e845 e865
Vocals x x x x x x
Choirs x
Studio,
acoustic instruments
x
Orchestra x
Brass / Saxophone x x x
Acoustic guitar x
Acoustic bass x
Guitar amplifiers x
Bass amplifiers x
Leslie x x x
Piano, grand piano x
Kick drums x
Snare drums x x x
Rack toms x x x
Floor toms x x x
Congas x x x
Cymbals x
Percussion x x x x
Overheads x
e 602 II_US.fm Seite 8 Donnerstag, 30. März 2006 1:50 13

9
Manufacturer declarations
Warranty
2 years
Approval
Sennheiser electronic GmbH & Co. KG declare that
this device is in compliance with the applicable CE
standards and regulations.
WEEE Declaration
Please dispose of this product at the end of its operati-
onal lifetime by bringing it to your local collection point
or recycling centre for such equipment.
e 602 II_US.fm Seite 9 Donnerstag, 30. März 2006 1:50 13

10
e 602 II_US.fm Seite 10 Donnerstag, 30. März 2006 1:50 13

Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany
Phone [phone]
Fax [phone]
www.sennheiser.com
Printed in Germany Publ. 03/06 515863/A02
LetzteSeite_Sp6.fm Seite 2 Donnerstag, 30. März 2006 1:56 13