Features—Benets
• Metal construction—rugged and reliable
• Hum compensating coil—reduces electrical interference
• Silent on/off switch (e 865-S only)
• Neodynum ferrous magnet with boron—keeps mic stable regardless of climate
• Falcon ring—consistent sound over time
Technical Data
resnednoc tertcelE recudsnarT
zH 000,02–04 esnopser ycneuqerF
dioidrac-repuSnrettappu-kciP
Bd051LPSmumixaM
Sensitivity (free eld, no load) 3 mV/Pa at 1 kHz. nominal
Nominal impedance at 1 kHz 200 Ω
Min. terminating impedance 1 k W
gnirewopmotnahpV84–V21ylppusrewoP
.zo11.xorppa)elbactuohtiw(thgieW
27.7x9.1sehcninisnoisnemiD
e 865 Professional Condenser Vocal Microphone
The E 865 represents the rst condenser microphone in the acclaimed Evolution Series. A live
performance, lead vocal microphone, the E 865 easily cuts through high on-stage levels by
virtue of its detailed and natural 40 Hz–20 kHz reproduction and superb transient response. Its
smooth super-cardioid polar pattern rejects feedback with low, off-axis coloration. The E 865
withstands sound pressure levels of up to 150 dB, and deftly suppresses pop noise. While it
picks up the nest sonic nuances, the E 865 is at the same time rugged, beneting from high-
quality workmanship and a robust all-metal housing. The microphone ships with a pouch and
mic clip.
Architect’s Specications
The microphone shall be an eletret condenser microphone operating in the frequency range
of 40–20,000 Hz. It shall have a super-cardioid pick up pattern with 3 mV/Pa at 1 kHz. nominal
sensitivity. The maximum SPL shall be 150 db, and the nominal impedance at 1 kHz shall be
200 Ω. The unit shall be powered by a 12–48V phantom power unit. The unit shall be
1.9 x 7.72 inches and weight approx. 11 oz. The unit shall be a Sennheiser e865 microphone.
Supplied Accessories
1 protective pouch
1 MZQ 800 microphone clip
Optional Accessories
21' XLR microphone cable MC21N
2304WZMneercsdniwmaofyerG
Floor stand with boom arm SEMS 3000
e 865