Sennheiser ME 36 User manual

Instruction manual
ME 34
ME 35
ME 36

ME 34, ME 35, ME 36 microphone heads
ME 34 | ME 35 | ME 36 | 1
ME 34, ME 35, ME 36 microphone heads
The ME 34, ME 35 and ME 36 are pre-polarized condenser
microphone heads for use with the Sennheiser MZH goosenecks.
The microphone heads are designed for conference, public
address and studio applications.
Features of the ME 34 and ME 35
• ME 34: cardioid pick-up pattern
• ME 35: super-cardioid pick-up pattern
• Rugged metal housing with non-reflective coating
• High sound quality
• Low equivalent noise level
Features of the ME 36
• Super-cardioid/lobar pick-up pattern
• Rugged metall housing with non-reflective coating
• Excellent directivity
• Superior sound quality
• Very low equivalent noise level

Connection possibilities
2 | ME 34 | ME 35 | ME 36
Connection possibilities
왘To create an intact bond, make sure that you screw the
microphone tightly onto the gooseneck.
A list of accessories can be found on the ME 34/ME 35/
ME 36 product page at www.sennheiser.com.
For information on suppliers, contact your local Sennheiser
partner: www.sennheiser.com > “Service & Support“.
ME 34
ME 35
ME 36 MZH 30xx

Specifications
ME 34 | ME 35 | ME 36 | 3
Specifications
ME 34 ME 35 ME 36
Frequency
response
40 Hz – 20 kHz 50 Hz – 20 kHz 40 Hz – 20 kHz
Acoustic
operating
principle
pressure
gradient
transducer
pressure
gradient
transducer
pressure
gradient
transducer/
interference
tube transducer
Pick-up
pattern
cardioid super-cardioid super-cardioid/
lobar
Sensitivity 10 mV/Pa 10 mV/Pa 18 mV/Pa
Electrical
impedance
50 Ω 50 Ω 50 Ω
Min.
terminating
impedance
1 kΩ1 kΩ1 kΩ
Equivalent
noise level
37 dB (CCIR)
26 dB(A)
37 dB (CCIR)
26 dB(A)
34 dB (CCIR)
23 dB(A)
Power supply
via MZH
P12 – P48 P12 – P48 P12 – P48
Current
consumption
microphone
250 μA250 μA250 μA
Dimensions
(mm)
∅12 x L18 ∅12 x L18 ∅8.2 x L96
Weight
(without MZH)
9.5 g 9.5 g 17 g
Connector special coax
connector
special coax
connector
special coax
connector

Manufacturer Declarations
4 | ME 34 | ME 35 | ME 36
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of
24 months on this product. For the current warranty conditions,
please visit our website at www.sennheiser.com or contact your
Sennheiser partner.
In compliance with the following requirements:
• RoHS Directive (2002/95/EC)
• WEEE Directive (2002/96/EC)
CE Declaration of Conformity
• EMC Directive (2004/108/EC)
The declaration is available at www.sennheiser.com. Before
putting the product into operation, please observe the
respective country-specific regulations!
WEEE Declaration
Please dispose of this product by taking it to your local
collection point or recycling center for such equipment.
China RoHs
(Pb) (Hg) (Cd) (Cr6+) (PBB) (PBDE)
(Metal parts) xoooo o
(Circuit Modules) xoooo o
o：
x：
(Parts)