SENSIRION EK-P3 User manual

Thank you for your interest in our digital differential pressure
sensors of the SDP600 series. Enclosed is your Evaluation
Kit EK-P3. Assure yourself of the outstanding precision of
the sensor, even at lowest pressure differences. To quickly
get your EK-P3 up and running, please consult the Quick
Start Guide on the back side of this card.
Your Technical Customer Support Team
SENSIRION AG
Laubisruetistrasse 50
CH- 8712 Staefa ZH
phone + 41 44 306 40 00
[email protected]
www.sensirion.com
Quick Start
Guide EK-P3

www.sensirion.com
Quick Start Guide EK-P3
1 1
1
2 3
4 5
Install software
after download from: www.sensirion.com/USB-viewer
Connect sensor
via adapter cable with the USB-
adapter. Connect green cable to
position 1.
Connect USB-adapter to PC
start program (Sensirion AG;
USB Sensor Viewer)
Select «SDP 6xx Series»
and press «OK»
For a detailed description of the SDP600 series sensor please download the datasheet
from our website.
Press «Run»
to start the program
1 1
1 1