Sepson H100PF User manual

May 2006
H100PF
Pneumatic freespool clutch Type No 63.31-050
10 TONNES WINCH
Metric std. US std.
(approx.)
Pulling force
- bottom rope layer 10.0 tonnes 22 500 Lbs
- top rope layer 6.5 tonnes 14 600 Lbs
Rope speed
- bottom rope layer 6.0 m/min 20 ft/min
- top rope layer 9.0 m/min 30 ft/min
Rope speed in high auto 2-speed
- bottom rope layer n/a n/a
- top rope layer n/a n/a
Max oil pressure 160 bar 2300 psi
Max oil flow 60 l/min 16 gal/min
Drum diameter 224 mm 8.82 inch
Rope diameter 16 mm 0.63 inch
(Acc. to DIN 14584, MBL ≥197 kN)
Rope length 60 m 197 ft
Numbers of layers 5 5
Winch weight 190 kg 427 Lbs
Rope weight 67 kg 151 Lbs
Dimensional drawing (dimensions in mm)

Feb-07
H100PF
Pulling force over the rope length
Pulling
force
(tonnes) Rope speed (m/min)
Total Rope
on the
drum (m)
1st 10,0 6,0 9,2
2nd 8,8 7.0 19,6
3rd 7,9 7,5 31,3
4th 7,1 8,5 44,1
5th 6,5 9,0 58,2
Mounting instructions
The winch should be mounted on a 16 mm
steel mounting plate fixed to the vehicle.
The winch must be fitted to the mounting
plate with 12 bolts M6S M12x40 (hot
galvanized) minimum quality 12.9.
Tightening torque 150 Nm (15 kpm) when
oiled.
Hydraulic installation
Declaration of Conformity
According to the Machine Directive 98/37/EC, Annex IIA
Sepson AB, P.O. Box 172, SE-780 50 Vansbro, Sweden declare under our sole responsibility that:
The winch type 63.31 with serial numbers 1010-1962
- are manufactured according to the Machine Directive 98/37/EC
-are manufactured according to following harmonized standards – EN 292-1 and 2
Vansbro December 9, 2005. Sepson AB Ulf Jons Designer
5,5
6,5
7,5
8,5
9,5
10,5
0,0 10,0 20,0 30,0 40,0 50,0 60,0
Total rope on the drum in metres
Pulling force in tonnes
Direction of winching