Seville Classics WEB480 User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
11-2017
Stacking (oponal)
STEP 5.
Install CORNER CLIPS (G) to
top corners of RAILS (D) and
TOP FRAMES (E).
Snap on FRAME CLIP (H) to hold
RAILS (D) and TOP FRAME (E)
together.
Assemble TOP secon of second
unit and t FEET (K) to boom of
base for a bonus non-slip folder
organizer.
Fit STACKING PINS (J) into top poles of SIDE FRAME (A) on the
boom unit.
Assemble second unit without BASE (A).
Fit the legs of the second unit over the STACKING PINS (J) and
press down.
Model #: WEB480
Thank you for choosing Seville Classics! We hope that you enjoy
your new desk organizer. Please read through this user guide for
parts list, assembly instrucons, frequently asked quesons and
further contact informaon.
11-2017
3-Tier Stackable Desktop
Leer File Tray Organizer

Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at [phone] or
send an email to Supp[email protected]om
A. Base
B. Side Frames (2)
C. Trays (3)
D. Rails (2)
E. Top Frame
F. Dividers (3)
1
Assembly Instrucons
STEP 1.
Clip FOOT PADS (I) to BASE (A).
G. Corner Clips (2)
H. Frame Clips (2)
I. Foot Pads (4)
J. Stacking Pins (4)
K. Feet (4)
2
STEP 2.
Slide SIDE FRAMES (B) over upright
poles on BASE (A).
IMPORTANT: Make sure guides
on side frames face inward.
Fit the small balls on TRAY (C)
through the holes on both SIDE
FRAMES (B) and fully push the
tray in.
TIP: Lightly pull the side frames
apart to more easily t the trays
into the guides.
Start with boom tray.
Repeat for other two trays.
STEP 3.
Insert RAILS (D) to back and front
of SIDE FRAMES (B).
STEP 4.
Insert poles of TOP FRAME (E) into
holes on RAILS (D).
Clip DIVIDERS (F) to the TOP
FRAME (E).
Install tallest DIVIDERS (F) in back
and shortest DIVIDERS (F) in front.