Seville Classics NSF Dimensions

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
07062021
FAQs
Q. Why is the cart wobbly and/or unstable?
A. It's because the top is not securely inserted into the four poles. If the four poles are
snugly and tightly fit into the top, the cart will be stable.
Q. Can it hold a counter-top dishwasher?
A. Sure! Table top holds up to 300 lbs. per shelf and up to 450 lbs. evenly distributed
across the shelf, basket and top. It's perfect for small appliances.
Q. Can I use it in a restaurant?
A. Yes, our stainless-steel cart is certified by the NSF to NSF/ANSI Standard 2 -Food
Equipment for use in dry environments like restaurant commercial kitchens and
storage rooms.
Q. Can I change the order of shelves and/or basket?
A. Yes! Feel free to install the basket or the shelf first at any height of your choosing.
Safety
Do not tip the table over or place upside down.
Do not place more than 1000 lbs. on the stainless steel top.
Specifications
Dimensions: 24" L x 20" W x 36" H
Weight capacity (top): 300 lbs
Weight capacity (basket): 50 lbs
Weight capacity (bottom shelf): 100 lbs
Weight Capacity: 450 lbs. evenly distributed
Weight: 32.3 lbs.
Model: SHE18321B
Thank you for choosing Seville Classics! We hope that you enjoy your new
stainless-steel table. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and contact informaon.
07062021
Stainless-Steel Top
NSF Kitchen Work Table Cart

Parts List
A. S.S. Top (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
B. Wire Shelf (1)
C. Poles (4 )
F. Basket (1)
E. Basket Track (2)
I. Feet (4)
H. Wheels (4)
G. Slip Sleeves (24)
2
Assembly Instrucons
STEP 1.
Fit caps to the bottom of
LEVELING FEET (I) and screw
into POLES (C).
OR, screw WHEELS (H) into
the base of POLES (C).
STEP. 2
Clip SLIP SLEEVES (G) around
bottom grooves.
IMPORTANT: Count up from
bottom grooves to make sure
all slip sleeves are at the same
height.
Fit SHELF (B) over slip sleeves
and press down.
STEP 3.
Repeat STEP 2 at the desired
height for the BASKET
TRACKS (E).Make sure the
tracks are at equal heights on
both sides of the cart.
STEP. 4
Clip SLIP SLEEVES (G) around
top grooves.
Fit TOP (A) over slip sleeves
and firmly press down. Ensure
a snug tight fit or the cart will
not be stable.
CONGRATULATIONS! Enjoy
your new stainless-steel
cart!
OR