Seville Classics SHE20303B User manual

Model: SHE20303B, 5B, 7B
Thank you for choosing Seville Classics! We hope that you enjoy your new
cart Please read through this user guide for parts list, assembly instrucons,
and contact informaon.
122020
3-Tier Rolling Steel Storage Bin
Ulity Cart

Parts List
A. Base frame (2)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
C. Poles (8)
E. Caps (4)
D. Screws (8)
G. Locking wheels (2)
F. Wheels (2)
H. Wrench (1)
B. Bin (3)

2
STEP 1.
Screw SCREWS (D) into the
tops of BASE FRAMES (A).
TIP: The long side of the
screws must point up.
Fit BIN (B) over exposed
screw threads.
Screw POLES (C) onto
exposed screw threads.
Screw SCREWS (D) into the
tops of POLES (C).
STEP 2.
Fit BIN (B) over exposed
screw threads.
Screw POLES (C) onto
exposed screw threads.
Assembly Instrucons

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
122020
STEP 3.
Align holes on last BIN (B) with
tops of POLES (C).
Screw CAPS (E) into tops of POLES
(C) through BIN (B).
STEP 4.
Aach WHEELS (F) to one
BASE FRAME (A), and aach
LOCKING WHEELS (G) to
other BASE FRAME (A) with
WRENCH (H).
Congratulaons!
Enjoy your new 3-Tier Rolling
Steel Storage Bin Ulity Cart.
Safety
DO NOT place more than 6.6 lbs. in each bin.
DO NOT aempt to climb, stand or lean on cart.
Clean with mild soap and damp wash cloth.
Remove excess water with clean towel.