Seville Classics ULTRADURABLE SHE18304BZ User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
FAQS
Q. Can I use it outside?
A. Our cart is designed for temporary outdoor use. Storing the cart outdoors
increases the risk of corrosion from moisture.
Q. Can I use it with fewer shelves? Without the handle?
A. Yes! You can use the cart with a minimum of two shelves and without the handle.
072019
Specicaons
Dimensions: 34" W x 18" D x 33.5" H
Weight capacity: 500 lbs. evenly distributed
Weight: 42 lbs.
Addional parts and accessories are available for purchase online at:
www.SevilleClassics.com
SHE24023
1" Slip Sleeves
(8-Pair)
Commercial-Grade 3-Tier
NSF Ulity Cart
Model: SHE18304BZ
Thank you for choosing Seville Classics! We hope that you enjoy your ulity
storage cart. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and further contact informaon.
072019

Parts List
Assembly Instrucons
A. Handle (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
B. Shelf (3)
C. Poles (4)
D. Slip sleeves (14)
E. Locking wheels (2)
F. Locking wheels (2)
STEP 1.
Press stem of WHEELS (E, F) into
boom of POLES (C).
Wheel should "click" when installed.
Repeat for all POLES (C).
2
STEP 2.
Snap SLIP SLEEVES (D) to the
lowest groove on POLES (C).
STEP 3.
Fit SHELF (B) over the top of
the 4 poles and over
SLIP SLEEVES (D).
TIP: If needed, use a rubber
mallet to fasten the shelf.
Repeat STEPS 2-3 at chosen
height for 2nd shelf.
STEP 4.
Snap 2 SLIP SLEEVES (D) to
poles on the narrow side of
the cart.
Slide HANDLE (A) over
SLIP SLEEVES (D).
TIP: Leave space at top of
POLES (D) for nal shelf.
STEP 5.
Repeat STEPS 2-3 for
nal shelf.
TIP: If necessary, use a
rubber mallet to fasten
the shelf.