Shark LIFT-AWAY XL UV550 User manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A Vacuum Pod
B Floor Nozzle
C Extension Wand
D Handle and Hose
WHAT’S INSIDE MAINTENANCE
UV550_QSG_EB_Mv4
B
D
A
QUICK START GUIDE
E Accessory Holder
F Pet Power Brush
G 8” Crevice Tool
H Upholstery tool
F G
H
E
Empty dust cup after each use
Press top
Dust Cup Release
latch to access
dust screen and
remove built-up
debris asrequired.
Pull up on
Dust Cup
Release latch
and lift dust cup
o canister.
Hold Dust Cup over
a trash bin and press
the empty-release
latch on the bottom.
Remove any string,
carpet fibers, or hair
that may be wrapped
around the brushroll.
Detach the motorized
nozzle from the portable
Lift-Away canister.
MAINTENANCE
Rinse pre-motor
filters every 3 months
and HEPA filter once a
year. Rinse with water
only. Allow filters to
air-dry completely
before reinstalling.
See enclosed Owner’s
Guide for more
information on how to
clean and replace
the filters.
Easy brushroll maintenance
Cleaning Filters
Post-Motor
Pre-Motor
1
(Click)
2
(Click)
Insert canister into
motorized floor nozzle.
Connect handle to the wand, pressing until it
clicks into place. Connect hose to the back of
the canister, pressing until it clicks into place.
Insert wand
into the
canister.
LIFT-AWAY
®
XL
Cord Storage
Wrap
Screen
Filter
C

VERSATILE FLOOR-TO-CEILING CLEANING
@sharkcleaning
1Plug In Vacuum
Then place your foot
gently on the floor nozzle
and tilt the handle back.
FLOOR CLEANING
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com
©2018 LIFT-AWAY and SHARK are registered trademarks of SharkNinja Operating LLC.
PORTABLE LIFT-AWAY®MODE
Attach any cleaning
accessories to the
handle or wand.
= Carpet Cleaning
= Bare /Above Floor
= OFF
BRUSHROLL ON/OFF:
1Press the ON/OFF switch “II” position
to engage the motorized floor brush
(for vacuuming carpets and rugs).
2NOTE: The motorized brush indicator
light will illuminate green when
motorized floor brush is on, or red if
there is a blockage or jam.
2Choose Setting
Slide the power switch to the appropriate
floor setting and start cleaning.
SUCTION CONTROL
Release suction for easier
push & pull on high pile
carpets and area rugs.
1Detach canister for Lift-Away Mode
Press Lift-Away button to lift canister
o floor nozzle.
2Attach desired cleaning accessory.
To clean above-floor
areas with the handle,
detach it from the
wand by pressing the
Handle button.
To clean with
a longer reach,
detach the
wand from the
floor nozzle by
pressing the
Wand Release
button.
Handle
Wand
Release