Sharp HS-DM4062 User manual

Thankyou forpurchasing ourproduct.
Pleaseread thisUser sManualbefore
using the product. Change without Notice
DigitalVideoRecorder
User sGuide
SATAHDD x2
Audioinputx4
Dualmonitoroutput

2
CAUTION
RISKOFELECTRICAL
SHOCK. DO NOTOPEN!
CAUTION:TOREDUCETHERISKOFELECTRICALSHOCK,
DO NOTREMOVECOVER(ORBACK), NOUSER
SERVICEABLEPARTSREFERSERVICINGTO
QUALIFIEDSERVICEPERSONNEL.
SafetyPrecautions
The lightningflashwitharrowhead symbol,withinan equilateral
triangle,isintended toalertthe usertothe presenceofinsulated
dangerousVoltage withinthe product senclosurethatmaybe
sufficientmagnitude toconstituteriskofelectricalshock topersons.
The exclamation point withinan equilateraltriangleisintended toalert
the usertothe presenceofimportantoperation andmaintenance
(servicing)instructionsinthe literatureaccompanyingthe appliance.
WARNING:TOPREVENTFIREORSHOCKHAZARD,DONOT
EXPOSEUNITSNOTSPECIFICALLYDESIGNEDFOR
Attention:installation shouldbe performed byqualifiedservice
Personnelonlyinaccordancewiththe National ElectricalCode or
applicablelocal codes.
PowerDisconnect. UnitswithorwithoutON-OFFswitcheshave
powersupplied tothe unitwheneverthe powercordisinserted into
the powersource;however,the unitisoperational onlywhen the
ON-OFFswitchisthe ONposition.The powercordisthe mainpower
disconnectforallunites.
Thereareno serviceablepartsforthisunit,callforyouragentfor
details.
Warranty
and Service

3
Beforeinstalling stand alone DVR,be suretothoroughlyreviewand followthe instructionsin
thisUsersManual. Payparticularattention tothe partsthat aremarked NOTICE.
Also, when connecting withexternalapplication, firstturnthe powerOFF and followmanual
instructionforappropriateinstallation.
1.Thisdocumentisintended forboththe administratorand usersofstand alone DVR
Model.
2.Thismanual containsinformation forconfiguring,managingand usingstand alone
DVRModel.
3. Topreventfireorelectricalshock, do notexposethe product toheat ormoisture
4. Besuretoread thismanual beforeusing stand aloneDVRModel.
5. Forquestionsand technical assistanceofthisproduct, contactyourlocal dealer.
►Strong recommendationon installation of the DVRunit
1.Check electricityatthe placeyou wanttoinstallthe DVRunit isstableand meetsour
electricityrequirements.Unstableelectricitywill causemalfunctionoftheunitorgive
criticaldamage tothe unit.
2.Severalchipson themainboardoftheDVRunitand harddiskdriveinsidethe unit
generateheat, and it mustbe properlydischarged.Do notputanyobjectsjustbeside
exhaustport(fan)ontheleftside ofthe unitand donotcloseup an opening(freshair
in-take)on the right side ofthe unit..
3.Putthe DVRunitatwell-ventilated placeand do notputheat-generating objectson the
unit.When itisinstalled inside 19 inchmounting racktogetherwithotherdevices,
pleasecheck built-inventilation fan of therack isproperlyrunning.
Aboutthisdocument
Beforereadingthisdocument

4
FCC Statement:
WARNING
ThisdevicecomplieswithPart 15 FCC Rules. Operationissubject tothe following two
conditions: (1)Thisdevicemaynotcauseharmfulinterference. (2)Thisdevicemust
accept anyinterferencereceived including interferencethatmaycauseundesired
operation."
*Federal CommunicationsCommission (FCC)Statement
WARNING
ThisEquipment hasbeen tested and found tocomplywiththe limitsforaClass Bdigital
device, pursuant toPart 15ofthe FCCrules.Theselimitsaredesigned toprovide
reasonableprotection against harmfulinterferenceinaresidential installation.This
equipmentgeneratesusesand can radiateradiofrequency energyand,ifnot installed
and used inaccordancewiththe instructions,maycauseharmful interferencetoradio
communications. However,thereisno guarantee thatinterferencewillnotoccurina
particularinstallation.If thisequipment doescauseharmful interferencetoradioor
television reception, whichcan be determined byturningthe equipmentoff and on, the
userisencouraged totry tocorrectthe interferencebyone ormoreofthe following
measures:
-Reorient orrelocatethe receiving antenna.
-Increasethe separation between the equipmentand receiver.
-Connectthe equipmentintoan outleton acircuit differentfrom
thattowhichthe receiverisconnected.
-Consultthe dealeroran experienced radio/TVtechnician forhelp.
*You arecautioned that changesormodificationsnot expresslyapproved bythe party
responsibleforcompliancecouldvoidyourauthoritytooperatethe equipment.

5
Please operatethekeypad function accordingtotheDVRmodelthatyoupurchased
4CH DVR
1.:Quad screen mode button
2.CHANNEL 1: Channel1full screen button
3.CHANNEL 2: Channel2full screen button
4.CHANNEL 3: Channel3full screen button
5.CHANNEL 4: Channel4full screen button
8CH DVR
1./ :Split screen mode button
2.CHANNEL 1/ 5:Channel1/ 5fullscreen button
3.CHANNEL 2/ 6: Channel2/6fullscreen button
4.CHANNEL 3/ 7: Channel3/7fullscreen button
5.CHANNEL 4/ 8:Channel4/8fullscreen button
Onlivemode,press Enterbuttonto(Shift)modeand then press numberbutton1;2;3;4
switchto5; 6;7; 8channelfullscreen.
FRONT PANEL

6
Miscellaneous
6.LOCK : Press thisbutton toKeyLock function
7.AUDIO : Audioonoroff button
8.AUTO: Autosequencemode
9.BACKUP: Image backup button
10.UP/STOP : Direction button UP/Playback stop button /
11.DOWN/ PAUSE : Direction button down/ Playback pause/(Stepplay)
12.REW/ LEFT: Reverseplaybackchoosebutton / playspeed /
13.FF/ RIGHT: Forwardplayback choosebutton /playspeed /
14.ENTER: Enterbutton orvalue change(+)/ Shift mode(S)
15.MENU BUTTON: Press thisbutton todisplaythe menu setup
16.ESC/PTZ: Press thisbutton toexit menu /PTZ mode
17.T-SRH :Press thisbutton toplayback timesearch
18.PLAYBUTTON: Press thisbutton toplayback
19.+BUTTON: Increase+valueschange.
20.RECBUTTON: Press thisbutton tostartrecordingimage
21.-BUTTON:Reduce-valueschange
22.USB2.0:Pan Driverslot
*Userneedstoplug inUSB againifActiveXloaded; image backup orversion updated.

7
REARPANEL
Powercode in12V/5A,powerswitcher(ON/OFF)
4CH DVRCamera1~4inputBNC type
8CH DVRCamera1~8inputBNC type
Monitorout
Audiochannelinputx1and output x1
Alarm/ Relay/ RS485 connector
VGAout (Optional)
RJ-45 (Network connector)
PS 2type mouseconnector

8
System Operate:
1. NTSC/PALautodetectisthedefault.Please power on DVRafter camera 1install.
2. Please setHDD toMaster on PCBifonlyoneisinstalled.
3. Press PLAYtoformatifanewharddisk isdetected.
Mouse Control
Operate:
MENU BUTTON: Press MENU button toentermenu setup orexit
ESC/ PTZ :Press ESCbutton toexitmenu/ ToPTZ controlmode
ENTERBUTTON: Press Enterbutton toconfirmset orvalue change(+)/ Shift mode
DIRECTIONBUTTON : MENU itemselect
+BUTTON:Increase+valueschange
-BUTTON: Reduce-valueschange
BACKUP:Tobackup mode
()MOVE (ENT)SELECT(MENU)EXIT
1Screen display
1. Double-click of the left button on desired camera
tofullchannel
2. Double-click of the left button on desired camera
to9split screen
3Menu display 1. One-click ofthe right button tomenuOSD
2. Back tolast OSDpage
2None No function
1Select 1. One-click onthe itemofOSD
2. One-click onthe value of item
3. One-click onthe Exit toquit and savemenu
4. Fromright-up toleft-belowand the set motion
detect area
1
2
3

9
MainMenu –RecordSetup
Notice:
1. Framerateadjustableundereachmode perchannel.
2. In24 hours, usercan adjust eachchannel framerate
of different recordmode.Suchasschedule,motion
detection,and alarmrecordmore.
3. Press button tochange differentofrecordmodes.
RecordTime Table: Baseon 80GBHDD recording
Record Quality: Low.Average:5KB;
RECFPS 60 30 15 10
RECHour 72 148 296 444
Record Quality: Normal.Average 10 KB;
RECFPS 60 30 15 10
RECHour 36 74 148 222
Record Quality: High.Average 20 KB;
RECFPS 60 30 15 10
RECHour 18 37 74 111
Actual recording timeisbaseon liveenvironment.Thistableisonlyforreference.
20 Kx30 (framerate)x60 (mins)x60 (secs)=2160000 K=2160 M/ hr
2160 M/ hrx24 =51840000 K=51840 M=51.84 G/ (1Day)
Please formatharddisk beforestarting recordingafter all theHDD installation
Hard diskcompatibletable
SeagateST31000340AS 1TB
SeagateST31000333AS 1TB
SeagateST3750330AS 750GB
SeagateST3500320AS 500GB
SeagateST3250620AS 250GB
Hitachi HDS721075KLA330 750GB
Hitachi HCP725050GLA380 500GB
WDWD5000AACS500GB
WDWD1600AAJS160GB

10
MainMenu –System Set –Network SettingsNetwork Settings –LocalIP
1.SelectSTATIC/PPPOE/ DHCPconnectiontype
2.DNSonlyworks under DDNSmode.
IftheDVRisunder anetwork system, suggestenableMENU –SYSTEM –TIMESETUP-
NTPserver togetanetwork requestautomatically.
MainMenu –Search –Time Search
Press ENTERtoselect dateand time.Direction left andrightbutton tomovevalue item.
ENTERor+/-button tochange value.