Sharp aquos PN-L703B Reference guide

4. Press POWER button in left bottom.
5. Turn on Computer power.
*You need to install “Touch panel setting tool”
and “SHARP Pen software” to computer.
6. Change and select input I/F of this computer.
You can select by touching “TOUCH MENU” button.
7. Touch input I/F of this computer.
PN-L703B/L603B
Brief Guide ver1.1
Connect with computer and turn on power
1. Connect with computer by USB cable.
2. Connect with computer by Video cable.
3. Turn on display main power.
①D-Sub input
②Display Port input
③HDMI input
④D-Sub input
⑤HDMI input
⑥HDMI input
①②③
④
⑤
⑥
POWER button / TOUCH MENU
Start up “White board”
1. Double click “Pen Software” icon on desktop. *twice quickly.
2. Then “White board” start up.
1
[Notice] You can connect from side.
cable
Via computer

4. Set on the setting menu like following image.
・Please select the kind of pen (Standard pen
/Brush pen/Marker/Figure pen),
Color (Black/Red/Blue/Green/Yellow/White),
Size(１～５).
・When you finish setting, please touch “Close” icon.
5. You can create size and color which you want .
・Touch “Custom” icon ,
Then you can set size and color.
Draw character on “White board”
You can draw character by touching display
(White board area) with pen.
Bundled pen
1. Touch the indicator (menu icon) .
2. “Square menu” like following image appears.
3. Touch “Pen１” icon.
・Touch “Eraser” icon on “Square menu”,
and then you can erase by touching (like
moving softly) the area which you want to
erase.
・You can erase by moving softly with bundled eraser.
Bundled eraser
●Change the size of eraser
●Erase all item on sheet
●Erase by bundled eraser
●Erase by bundled pen
Erase character
1. Double click “Eraser” icon on “Square menu”.
・If you have already selected “eraser”,
please touch “Eraser” icon again.
2. Select the size and touch from following 4 images.
1. Double click “Eraser” icon on “Square menu”.
・If you have already selected “eraser”,
please touch “Eraser” icon again.
2. Touch “Sheet clear” icon ,
then dialog box appears.
・Once you touch “Yes”, all item is cleared.
2
●Change size and color of pen

●Change sheet by dragging display
Add new sheet
Show sheet list of “White board”.
・Touch “View” icon on “Square menu”
and drag display to right or left (with keeping touch),
then you can change sheet.
・Touch “Add” icon on “Tool bar” in bottom ,
then you can add new sheet.
・Touch ”Page” icon ,
then you can move sheet, previous and next.
・Touch “Sheet list” icon on “Tool bar” in bottom, then you can see thumbnail each sheet.
・If you touch once, you can see up to 8 sheets’ thumbnails at the bottom of screen like following (a) image.
If you touch again, you can see max. 48 sheets’ thumbnails like following (b) image
and you can move to the sheet where you touch.
(a) (b)
[Notice]
Format of “Save as image” is set by “sheet” tab on setting
of “Tool bar” in bottom
1. Touch “Save” icon on “Square menu”.
2. Select the save method.
・Save as a new file：・Save to the same file：
・Save PDF：・Save image：
*”Save as a new file” and “Save to the same file”,
it save as SWSX format and you can build again.
*”Save image”, it save as BMP/JPEG/PNG format
so you can not build again.
Save the data
4. Touch “OK”.
[Notice]
When you want to change file name, software key board appear
by touching file name space and then you can change it
3. Select the file save location and touch “OK”.
3

Open saved data
Turn off power
Tool bar structure (in bottom)
1. Touch “Open file” icon on “Square menu”.
2. Select file opening method.
・New ：Create a new sheet
・Open as a new file ：Open data as a new file
・Add to the current sheet ：Add data to the current sheet
3. Read the file.
・Select the saved location and touch “OK”.
4. Select the file and touch “OK”.
1. Shut down computer.
2. Press POWER button in left bottom.
[Notice]
Status of Power LED
・Green lit : Power on
・Orange lit : Power off (Standby mode)
・Green flashing : Input signal standby mode
3. Turn off on display main power.
①“Pin” button： Touch to switch between the pin / do not pin settings.
②Sheet list ：Shows the sheets as thumbnails.
③Settings ：Displays the pen software settings screen.
④Search box ：You can search for text and handwritten characters
in the box.
⑤Sheet navigation buttons：Touch the sheet navigation button
to change the displayed sheet.
⑥Page No. of the current sheet：
①②③④⑤⑥⑦⑧⑨⑩⑪
・Pen1~3：Draw lines.
・Eraser：Erase hand-drawn lines.
・Select ：Select an object.
You can move/enlarge/rotate
/delete/copy.
・Redo ：Redo the immediately preceding
canceled operation.
・View ：Enlarge the view of the whiteboard,
change the display position and pages.
・Undo ：Cancel the immediately preceding
operation.
⑦Add sheet button：When the last sheet is displayed,
press to add a sheet at the end.
⑧Board list：Touch to display the list of boards as thumbnail images.
：Add White board
：Add overlay board
*If you have already open overlay board, you can not add this.
⑨Minimize ：The software will be minimized in the task tray.
⑩Window / Maximize ：Displays the software in a window.
* Whiteboard mode only..
⑪Quit ：The software is exited.
・Drawing Object：Draw a figure or line/arrow.
・Paste：Pastes a copied object.
・Open：Open a file.
・Text ：Enter text by software key board.
・Insert image：
：Insert an image file.
：Insert Screen capture.
・Save：Save file.
・All function：Displays all functions in list view.
・Print：Print file.
You can select current sheet or all.
Square menu structure
4