Sharp HR-GB201 User manual

Quick Start Guide
PORTABLE JUKEBOX RECORDER
MODEL
HR-GB201
Follow the setup procedures
before you use this unit.
Refer to the operation manual for details.
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or [phone]
if telephoning from Ireland).
9JCG5230100022
04G S YT 2
HR-GB201_QG 9JCG5230100022
Downloaded from: http://www.usersmanualguide.com/

HR-GB201_QG 9JCG5230100022
Charging the main unit
1Connect the AC adaptor to
the DC IN 5V socket on
the cradle.
2Plug the AC adaptor into
the wall socket.
3Place the main unit on the
cradle.
Press down the unit firmly.
Battery charge indicator
(red) lights up.
AC 100 - 240 V,
50/60 Hz
To the wall socket
Press down the unit
with its front side
facing toward you.
Battery charge
indicator (red)
Rear
Fit to the connection
terminal of main unit
PCDSC INLINE OUT
- 1 -
Downloaded from: http://www.usersmanualguide.com/

HR-GB201_QG 9JCG5230100022
Installing SHARP Music Manager
Notes:
If the "Software Installer"
screen does not appear in
step 1, double click the
"autorun.exe" stored on the
CD-ROM from Explorer, etc.
When you use Windows 98
Second Edition, insert the
supplied CD-ROM and click
the "Install W98SE Driver"
button to install the driver.
1Insert the supplied CD-
ROM into your CD-ROM
drive.
The "Software Installer"
screen appears.
2Click the "Install SMM"
button.
Follow the instructions on
the screen.
("Software Installer" screen)
- 2 -
Downloaded from: http://www.usersmanualguide.com/

HR-GB201_QG 9JCG5230100022
Connecting the unit to a PC
1Hold down the button
for 2 seconds or more.
The unit will turn the power on.
2 Connect the AC adaptor to
the DC IN 5V socket and
place the unit on the cradle.
3 Connect the unit to a PC
with a USB connection cable.
The hard disk access indi-
cator (green) flashes.
Whilst the unit is connected to the
PC, the screen below appears.
Note:
The operation buttons on the
main unit do not work if it is
connected to a PC. Disconnect
the PC to operate on the unit.
Hard disk access
indicator (green)
PC
USB connec-
tion cable To the USB port
Rear
PCDSC INLINE OUT
- 3 -
Downloaded from: http://www.usersmanualguide.com/

HR-GB201_QG 9JCG5230100022
Transferring audio data
You can transfer audio data
(MP3, WMA or WAV format) to
the unit.
1Connect the unit to a PC.
2
From the "Start" menu, click
"All Programs", "Sharp Music
Manager", and then
"SharpMusicManager".
The navigation window
appears.
3Select audio data on the
PC and click "Send To
Player" on the "Edit"
menu.
Audio data is transferred to
the "Jukebox_Sys" folder on
the "SHARP" drive.
(Navigation window)
- 4 -
Downloaded from: http://www.usersmanualguide.com/

1Hold down the button
for 2 seconds or more.
The unit will turn the power on.
2Use the or button
to select an audio data
and press the button.
Playback starts.
HR-GB201_QG 9JCG5230100022
Playing transferred audio data
(Playback window)
To stop playback:
Press the button.
To turn off the power:
Hold down the button for 2
seconds or more.
00 03 30
10
R
Right
channel
Left
channel
L
Observe the correct
direction for the plug.
- 5 -
Downloaded from: http://www.usersmanualguide.com/

Built-in microphone
You can record voice data with
the built-in microphone.
1Hold down the button
for 2 seconds or more.
The unit will turn the power on.
2 Hold down the REC button
for 2 seconds or more.
Recording starts.
To stop recording:
Press the button.
HR-GB201_QG 9JCG5230100022
Recording from the built-in microphone or a CD player
CD player
Music from CDs is recorded as
MP3 files.
1 Connect a CD player to the
main unit.
2Hold down the button
for 2 seconds or more.
The unit will turn the power on.
3 Hold down the REC button
for 2 seconds or more.
4Begin playback on the CD
player.
Recording will begin auto-
matically.
To stop recording:
Press the button.
To audio
output sockets
Audio cable
(commercially available)
CD player
Microphone
- 6 -
Downloaded from: http://www.usersmanualguide.com/

HR-GB201_QG 9JCG5230100022
Playing recorded voice or music data
4Select "VOICE RECORD"
or "ENCODE" in the same
way as step 3.
5Use the or button
to select data to play and
press the button.
Playback starts.
To stop playback:
Press the button.
1Hold down the button
for 2 seconds or more.
The unit will turn the power on.
2 Hold down the MENU button
for 2 seconds or more.
3Use the or button
to select "RECORD", and
press the button.
0000
0002
Playing the
voice data.
Playing the
music data.
R
Right
channel
Left
channel
LObserve the correct
direction for the plug.
- 7 -
Downloaded from: http://www.usersmanualguide.com/

This file has been downloaded from:
www.UsersManualGuide.com
User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..
Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,
manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,
documentation manual, user maintenance, brochure, user reference, pdf manual
Downloaded from: http://www.usersmanualguide.com/