Listening to a CD or MP3 disc
1Press the FUNCTION button until “CD”appears on the dis-
play.
2Press the CD EJECT button to open the disc compart-
ment.
3Place a disc on the spindle, label side up.
4Close the disc compartment by firmly pushing the corner
marked “PUSH CLOSE”.
5Press the button to start playback from track 1.
PUSH
CLOSE
Listening to the radio
1Press the FUNCTION button until “FM”or “AM”appears on
the display.
2Press the TUNING ( or ) button to tune in to the desired
station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the FUNCTION button to display the “ST” indicator.
●“” will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
Listening to a cassette tape
1Press the FUNCTION button until “TAPE”appears on the
display.
2Open the cassette compartment by pushing the area marked
“PUSH EJECT ”.
3Load a cassette into the cassette com-
partment with the side to be played
facing toward you.
4Close the cassette compartment by pushing the area marked
“PUSH EJECT ”.
5Press the button to start playback.
■If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on
again.
2. If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
■Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-
by mode.
2. Whilst pressing down the MEMORY/SET button and the
button, press the ON/STAND-BY button until “CLEAR”
appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
■Maintenance
Routine maintenance is required for continued optimum perfor-
mance, refer to the operation manual (page 26).
XL-MP35HE_QG.pm 03.9.2, 1:46 PM2
Downloaded from: http://www.usersmanualguide.com/
