Sharp 29K-FD5RU User manual
1
29K-FD5RU
29K-FG5RU
1-1 1-2
SHARP CORPORATION
SERVICE MANUAL
29K-FD5RU
29K-FG5RU
MODELS
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
WARNING
The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug and power
receptacle, when servicing this chassis. To prevent electric shock, do not remove cover. No user – serviceable
parts inside. Refer servicing to qualified service personnel.
»SPECIFICATIONS ........................................... 2
»IMPORTANT SERVICE NOTES ...................... 2
»ADJUSTMENT PRECAUTIONS ..................... 3
»TROUBLE SHOOTING FLOWCHART.......... 19
»SOLID STATE DEVICE BASE DIAGRAM ..... 23
»CHASSIS LAYOUT ........................................ 24
»BLOCK DIAGRAM ........................................ 26
»WAVEFORMS ............................................... 30
»DESCRIPTION OF SCHEMATIC DIAGRAM .. 31
»SCHEMATIC DIAGRAM
■CRT UNIT ................................................. 32
■PIP UNIT .................................................. 33
■MAIN UNIT ............................................... 34
■FRONT UNIT ............................................ 38
»PRINTED WIRING BOARD ASSEMBLIES ... 40
»REPLACEMENT PARTS LIST
■ELECTRICAL PARTS ............................... 47
■MISCELLANEOUS PARTS ...................... 56
■SUPPLIED ACCESSORIES ..................... 56
■PACKING PARTS ..................................... 56
■CABINET PARTS ..................................... 56
»PACKING OF THE SET ................................ 57
Page Page
CONTENTS
COLOUR TELEVISION
Chassis No.GB-4
S95O229KFD5RU
ËChild Lock
ËDynamic Skin Tone
ËGraphic Equalizer
ËClock
ËSound Mode (Music / Movie /
News / Custom)
ËHotel Mode
Ë16 : 9 Mode
ËPIP (for 29K-FD5RU only)
ËWoofer (for 29K-FD5RU only)
ËTweeter (for 29K-FD5RU only)
FEATURES
ËWorld Multi 28 System
Ë100-CH Program Memory
ËAV Mode (Standard / Dynamic /
Soft / Custom)
ËCATV Hyper Band Ready
Ë4 Line Digital Comb Filter
ËVelocity Modulation
ËBlue/Black Stretch Circuit
ËPicture Noise Reduction
ËWhite Temp. Select
ËAperture Control
ËGamma Correction
ËMulti Language OSD (English / Russian)
ËOn/Off/Reminder Timer (with Beep Sound)
ËComfy View
ËRear AV-IN 1 & 2, S-Video In, AV Output
(Monitor Out), Headphone and Front AV-IN 3
ËAFT
ËComponent Input Terminal
ËMulti Language TELE TEXT
ËSurround Sound SRS 3D (for 29K-FD5RU
only)
ËBase Emphasis (BBE) (for 29K-FD5RU only)
ËNICAM/A2
2
29K-FD5RU
29K-FG5RU
2-1 2-2
IMPORTANT SERVICE NOTES
Maintenance and repair of this receiver should be done by qualified
service personnel only.
SERVICE OF HIGH VOLTAGE SYSTEM AND PIC-
TURE TUBE
When servicing the high voltage system, remove static charge from it by
connecting a 10K ohm resistor in series with an insulated wire (such as a
test probe) between picture tube dag and 2nd anode lead. (AC line cord
should be disconnected from AC outlet.)
1. Picture tube in this receiver employs integral implosion protection.
2. Replace with the same type number of picture tube for continued safety.
3. Do not lift picture tube by the neck.
4. Handle the picture tube only when wearing shatterproof goggles and after discharging
the high voltage completely.
X-RAY
This receiver is designed so that any X-Ray radiation is kept to an absolute
minimum. Since certain malfunctions or servicing may produce potentially
hazardous radiation with prolonged exposure at close range, the followin
precautions should be observed:
1. When repairing the circuit, please make sure do not increase the high voltage of the set
to more than 34.0kV (at beam 0
µ
A).
2. To keep the set in a normal operation , please make sure it's function at 30.0kV
±
1.5kV
(at beam 1,700
µ
A). The set has been factory - adjusted to the above-mentioned high
voltage.
∴∴
∴∴
∴If there is a possibility that the high voltage fluctuates as a result of the repaires,
never forget to check for such high voltage after the work.
3. Do not substitute a picture tube with unauthorizerd types and/or brands which may
cause excessive X-ray radiation.
BEFORE RETURNING THE RECEIVER
Before returning the receiver to the user, perform the following safety checks.
1. Inspect all lead dress to make certain that leads are not pinched or that hardware is not
lodged between the chassis and other metal parts in the receiver.
2. Inspect all protective devices such as non-metal control knobs, insulating fishpapers,
cabinet backs, adjustment and compartment covers or shields, isolation resistor- ca-
pacity networks, mechanical insulators etc.
SPECIFICATIONS
!
"#$%&
!
'(%& ")*%&
'+%& ")$%&
((%& ""*%&
*(%& "**%&
, !
-. "**/%&
-"**$*0"*'(%&
12"(")%&
))+ 3 )*+4 - (+0'+ %&
5"(6
- 7 8
9
&
-
4%0% /( : ,
8 :
-.0; -0;
4%: ) : 5)
%: )5: '$
-24 < : = >) 5 : *5
-.0? -0?
4%: 85 : 85) 5 : 5)
%:)5: '$ )5 : (/
-. -
4%: @8.-1A : B
%: @? C %?A )5: '$
12
4%: ) : 5" @A
5 : 5) @BA
%:5* : '$ @A
5" : ') @BA
-24 -' : -5 - : 6>)$ @A
5" : '" @BA
8 ! *#)( %& : #'")( %&
6 :D /'*
%:D (#*
:D (++(
6:@EAD *"( 9@)$?(8A
*)+ 9@)$?;(8A
Specifications are subject to change without prior notice.
(6 E ) >5+6 @ )$?(8A
5"E'E)@A >5+ @ A
>") @A )$?(8
5"E'E)@A )$?;(8
5+6 E ) @ )$?;(8A
3
29K-FD5RU
29K-FG5RU
3-1 3-2
ADJUSTMENT PRECAUTIONS
This model's setting are adjusted in two different ways: through the I2C bus control and
in the conventional analog manner. The adjustments via the I2C bus control include preset-
only items and variable data.
1. Setting the service mode by the microprocessor.
1Press and hold the local key "VOL DOWN" & "CH UP" when power on the main
switch,TV will enter into the SERVICE MODE.
2Press the CH DOWN / UP key on the remote controller to get ready to select the
mode one by one.
3Press the CH DOWN / UP key on the remote controller to select the modes
reversibly one by one.
4Using the VOLUME UP/ DOWN key on the remote controller, the data can be modi-
fied.
5Use the MENU Key on the remote controller to select the mode as shown in the
next page.
6When press the local key "VOL DOWN" & "CH UP" at the same time, it will be
released from the service mode.
2. Factory Presetting.
2The initial data are preset as listed in page 4-2 to 5-1.
3Make sure whether the initial data need to modify or not.
Note: Once the chassis has been assembly together and in ready condition, please make sure it's go
through initialize process (see above 2-1)
Precaution: If haven't done this initialization, malfunction might be happen.
1
The EEPROM can be initialized by the following 2 methods :
(i) Press and hold the local key "VOL DOWN" & "CH UP" during main switch
POWER ON. TV will enter into the service mode and the initial data will be preset
into the EEPROM only when the NEW EEPROM is used.
(ii) After enter into the SERVICE MODE, at "INIT EEPROM" SERVICE ITEM
(which is under "CHECK MODE" section), press REMOTE CONTROLLER key
of code "ED", the initial values are automatically preset.
SERVICE MODE
(1) In the Service Mode, Key is used to select the mode in the following order.
EW-W-P60
VX-43-Compress
VER-SHI-P60
HOR-SHI-P60
EW-W-P50
VER-AMP-P60
V SLOPE
HOR-SHI-P50
S-CORR
EW-W-N50
V-LIN
V SCROLL
VER-AMP-N60
LOCOR-PAR
VX-NORMAL
VER-AMP-N50
VER-SHI-N50
HOR-SHI-N50
E/W-TRAP
H-PAR
H-BOW
E/W-PAR
UPCOR-PAR
HOR-SHI-N60
VER-SHI-N60
VER-SHI-P50
EW-W-N60
VER-AMP-P50
GEOMETRIC
ADJ MODE
4
29K-FD5RU
29K-FG5RU
4-1 4-2
! "" "" #$
%&" "" #$ ' %" "" #$
%#( " "" #$ ' %" "" #$
(( " " '( &" "" #$
% " "" "" #$ '% "" "" #$
"#" &" "" #$ '" (&" "" #$
&(" " ' "" "" #$
& " " ' &" "" #$
&&# " "" #$ '& &" "" #$
) " %" ' " "" #$
# " "" #$ ' " "" #$
# %" "" #$ ' " "" #$
%" "" #$ !
( ( %&" !
% " "(" "" #$ !
" (% """ "" #$ !
(" "&(" "" #$ !
( "" "" #$ !
& )(& " %" !
% (" " !
#" (" "" #$ !
"% ("" !
"& " "" #$ !
( % &"" "" #$ !
% &""" !
" &""" "" #$ !
' """ %" !
&(" %" !
& ) &(" %" *& "" "" #$
)& (" %" !
( ) " %" !
( '% %" %" !
( )% %" %" !
(( )" (" %" !
(% '&( &&"" %" !
(" " "" #$ !
( &" "" #$ !
( ! "" "" #$
(& %" "" #$ !
( % %(" "" #$ !
% ! !
% #%( %" "" #$ %&" "" #$
% #%" (" "" #$ *% " "" #$
%( #% " "" #$ ( " "
%% " %" "" #$ " "" "" #$
%" " """ "" #$ &(" "
% ! & " "
% ! " "" #$
%& ! %" "" #$
% ! ( %&"
" ! *" "(" "" #$
" ! (% """ "" #$
INITIAL SETTING
+,-./, 0 1,2 / 3,/ /, 4556789 :;/; 78 !
CUT-GW-DVD
DRI-BW-DVD
CUT-RW-DVD
DRI-RW-DVD
DRI-GW-DVD
CUT-RC-DVD
CUT-GC-DVD
DRI-GC-DVD
DRI-BC-DVD
CUT-GS-DVD
DRI-RC-DVD
CUT-RS-DVD
DRI-RS
DRI-GS
CUT-RS
DRI-BS
CUT-GS
DRI-RC
DRI-GC
DRI-BC
DRI-RW
CUT-RC
CUT-GC
DRI-GW
DRI-BW
CUT-RW
DRI-RS-DVD
CUT-GW
DRI-BS-DVD
DRI-GS-DVD
WHITE POINT
ADJ MODE
Notes:
FORWARD : CH UP KEY
REVERSE : CH DOWN KEY
SUB-COL
SUB-CON
SUB-BRI
SUB-BRI-DVD
SUB-CON-DVD
SUB-TINT-DVD
SUB-TINT
SUB-SHARP
PICTURE SUB ADJ
MODE
5
29K-FD5RU
29K-FG5RU
5-1 5-2
(1) The following default data has been factory-setting for the EEPROM.
Default Settings:
! "#$
% ! ! "& '((# )*+
!,& #- ."/ ,& *0#/ , "' $*0#"0#+
SHIPPING SETTING & CHECKING
121
2
0#*
324
0#*
324
#/50*
324
&"60'
324
!)**0"#
324
"5"7
324
8&#'
324
#/50*
"0
324
&"#0"#
324
"65 +
(*
,")5 0#/*
(*
,")5 0#/*
1!
92:! (#)
"* .;&
%
"* %<% ($
% ($
(#) 3,& ($54
"* .*00#%
&/&"(
=!1
3!4
"* .*00#!
&/&"(
3!4
85"*6"'> &/&"(%
&/&"(
82! (#)
85"*6"'> &/&"(!
&/&"(
=2 =
88
8"?&0 &/&"(
&/&"(
2
8"?&0 &/&"( =
&/&"(
! % 3@4
88
8"?&0 &/&"(
&/&"(
8 % 3@4
88
8"?&0 &/&"(
&/&"(
8 3@4
88
<$0/0#&7
$0/0 #&7
%5)(
1 %5)(
88
5'"0#
;&!0/
"* .*00#
&/&"(
(#)
8
55 &/&"(*
%
88
! ($
55 &/&"(* !
2
88
=12 ($
55 &/&"(*
1 3@4
88
($
55 &/&"(*
!
! ($
55 &/&"(* !
! (#)
=12 ($
55 &/&"(*
AAAA
2! (#)
2
%
!
AAAA
!
2
2!
B
AA
=!1
%2
AA
88 !
AAAA
!
B
!!
AAAA
2! !
88
= !!
88
3!4
% ! (#)
2 (#)
% 1
AAAA
2!!2
88
88
==
!
=
1 (#)
%
= 38& "55 .*00#4
2! =<=B
2!
55 &/&"(* 2
2
55 &/&"(* 2
55 &/&"(* 88
8 ! (#)
$5 7 C 0* )*$ * ,55;0#/ $,")5 $"" 0# ! 6"* # ($5
*.'0,0'"0# "#$ $*0#"0#+
324
3!4
88
88
!,& #- ."/ ,& 3@4 C 3@4
55 &/&"(* 88
= 38& "55 .*00#4
8!92 +D
SREC/SRAC/SYI/STTM SREC-SCA (SKD)
R/C CODE
MCL 1 (R/C CODE 117h) MCL 2 (R/C CODE 169h)
TV-CH. CH-No. Fv (MHz) S-SYSTEM CH-No. Fv (MHz) S-SYSTEM
52 SKIP OFF FREE E-37 599.25 5.5 B/G
53 SKIP OFF FREE JPN-38 621.25 4.5 M
54 SKIP OFF FREE OI-42 639.25 6.5 D/K
55 SKIP OFF FREE I-54 735.25 6.0 I
56 SKIP OFF FREE E-58 767.25 5.5 B/G
57 SKIP OFF FREE WE-64 815.25 5.5 B/G
58 SKIP OFF FREE I-69 855.25 6.0 I
59 SKIP OFF FREE JA-1 91.25 4.5 M
60 SKIP OFF FREE JA-6 183.25 4.5 M
61 SKIP OFF FREE JA-8 193.25 4.5 M
62 SKIP OFF FREE JA-12 217.25 4.5 M
63 SKIP OFF FREE US-14 471.25 4.5 M
64 SKIP OFF FREE JA-50 693.25 4.5 M
65 SKIP OFF FREE S-2 112.25 5.5 B/G
66 SKIP OFF FREE S-10 168.25 5.5 B/G
67 SKIP OFF FREE S-20 294.25 5.5 B/G
68 SKIP OFF FREE S-41 463.25 5.5 B/G
69 SKIP OFF FREE E-5 174.95 5.5 B/G
70 SKIP OFF FREE E-5 175.55 5.5 B/G
99 SKIP OFF FREE SKIP OFF FREE
~
~
~
6
29K-FD5RU
29K-FG5RU
6-1 6-2
MODE DYNAMIC STANDARD SOFT
CONTRAST 60 60 50
COLOUR +6 +1 -5
BRIGHTNESS 0 0 0
TINT 0 0 0
SHARPNESS +6 1 - 4
PEICTURE NR OFF OFF OFF
WHITE TEMP 0 (center) 0 (center) 0 (center)
MODEL MAGNETIC FIELD (V.H) nT BACKGROUND LANGUAGE S-SYS FACTORY SET
HONG KONG 20,000 40,000 17,000K CHINESE AUTO SET 2
SINGAPORE -10,000 40,000 12,300K ENGLISH AUTO SET 3
MIDDLE EAST 30,000 20,000 18,000K ARABIC AUTO SET 4
AUSTRALIA -50,000 20,000 12.300K ENGLISH AUTO SET 8
RUSSIA 45,000 20,000 7,500K RUSSIAN AUTO SET 5
(1) Refer to below table (2.1) for setting of each destination.
Table 2.1
Table 2.2
(2) Refer to below table (2.2) for NORMAL setting of each AV mode.
(3) Refer to below note for (*1) ~ (*4).
(*1) : Only available for model with POWER SAVE function.
(*2) : Only available for model with COMFY VIEW function.
(*3) : Only available for model with SAFETY MODE function.
(*4) : Only available for model with GAME function.
0001 Option Mode Picture Tube Used Type TUBE-TYPE
0002 PIF Frequency Setting PIF
0003 Sound M SND-M
0004 Sound DK SND-DK
0005 Sound I SND-I
0006 Sound BG SND-BG
0007 Colour System SECAM SECAM
0008 Colour System NTSC358 NTSC358
0009 Colour System NTSC443 NTSC443
0010 Game IC GAME-IC
0011 Picture In Picture PIP
0012 Headphone HEADPHONE
0013 Equalizer EQUALIZER
0014 Sub Woofer WOOFER
0015 BBE BBE
0016 SRS SRS
0017 DOLBY DOLBY
0018 Audio Configuration AUDIO-CFG
0019 Mono Bilingual BILINGUAL
0020 Hotel Mode HOTEL
0021 Hotel Volume HTL-VOL
0022 Hotel Program Number HTL-PRG
0023 HTL-USE-LAST HTL-USE-LAST
0024 OPC OPC
0025 Rotation Functionality ROTATION
0026 Childlock CHILD
0027 Wide Screen Signalling WSS
0028 Golden SCART GLD-SCART
0029 Thailand OSD Language THAI
0030 Arabic OSD Language ARABIC
0031 Iranian OSD Language IRANIAN
0032 Malay OSD Language MALAY
0033 Chinese OSD Language CHINESE
0034 French OSD Language FRENCH
0035 Russian OSD Language RUSSIAN
0036 Power On Last Status PW-LAST
0037 Background BACK-GND
0038 Tuner 2 TUNER2
0039 FM Radio FM-RADIO
0040 Curtain Effect CURTAIN
0041 Curtain Colour CURT-COLOUR
0042 AV1-IN AV1-IN
0043 AV1S-IN AV1S-IN
0044 AV2-IN AV2-IN
0045 Component Input DVD1-IN
0046 AV3-IN AV3-IN
0047 AV3S-IN AV3S-IN
0048 INCL-AV INCL-AV
0049 Reminder Timer TIM-REMINDER
0050 View Timer TIM-VIEW
0051 Switch Timer TIM-SWITCH
0052 Time Format TIME-FORMAT
0053 Off Timer TIM-OFF
0054 Commercial Skip Timer TIM-SKIP
0055 Teletext Pan-european TXT-EURO
0056 Teletext Western TXT-WEST
0057 Teletext On TXT-ON
0058 Teletext Split TXT-SPLIT
0059 Virgin Mode VIRGIN MODE
0060 ERR-1-8-SUP ERR-1-8-SUP
0061 ERR-XRAY ERR-XRAY
0062 ERR-SUPVOL ERR-SUPVOL
0063 ERR-VERTG ERR-VERTG
0064 LOGO ERR-VERTG
1
1
1
1
1
0
1
0
1
1
1
7
1
7
0
1
1
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
1
2
0
0
0
1
0
0
1
1
1
1
1
1
0
0
1
1
1
0
1
2
0
1
1
0/1
0..7
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0..4
0/1
0/1
0..60
0..99
0/1
0/1
0/1
0..7
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0..2
0/1
0/1
0/1
0/1
0/1
0..2
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1
1
2
1
1
1
1
1
1
1
1
1
2
0
0
1
1
1
0
1
1
1
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
30
30
0
1
1
0
0
0
1
1
1
1
0
1
1
0
1
1
1
1
0/1
1
1
0/1
1
1
SETTING DATA
ITEM
SERVICE MODE
EEPROM ITEM
OSD
DATA
INITIAL DATA
FD5RU FG5RU
0
1
0
0
2
0
0065 MSG SCROLL TM MSG SCROLL TM 100..20 10
0066 MSG IN TM MSG IN TM 20..4 2
0067 MSG KEY MSG KEY 00/1 0
0068 REMOVE-PIP-DAC REMOVE-PIP-DAC 00/1 1
0069 ARROW-ENTER-KEY
ARROW-ENTER-KEY
00/1 0
1
2
1
1
1
1
1
1
1
0
0
1
1
0
1
0
1
0
1
1
7
0
0
1
1
1
0
1
1
0
0
0
0
0
0
0
1
1
0
30
0
1
1
0
0
1
1
1
1
1
1
1
1
0
1
1
1
1
0
1
1
1
1
1
10
2
0
1
1
7
29K-FD5RU
29K-FG5RU
7-1 7-2
Adjustment Mode Items
A001 RF-AGC
0…63 UOC-TV RF-AGC 32 19
A002 RF AGC PIP
0…63 PIP-IF RF AGC PIP 00
A003 V SLOPE
0…63 UOC-TV V SLOPE 40 35
A004 VER-AMP-N50
0…63 UOC-TV VER-AMP-N50 32 21
A005 VER-SHI-N50
0…63 UOC-TV VER-SHI-N50 25 25
A006 HOR-SHI-N50
0…63 UOC-TV HOR-SHI-N50 45 44
A007 EW-W-N50
0…63 UOC-TV EW-W-N50 40 40
A008 V-LIN
0…63 UOC-TV V-LIN 32 32
A009 S-COR
0…63 UOC-TV S-COR 30 32
A010 V SCROLL
0…63 UOC-TV V SCROLL 32 32
A011 VX-NORMAL
0…63 UOC-TV VX-NORMAL 32 32
A012 H-PAR
0…63 UOC-TV H-PAR 35 24
A013 H-BOW
0…63 UOC-TV H-BOW 25 28
A014 E/W-PAR
0…63 UOC-TV E/W-PAR 35 42
A015 UPCOR-PAR
0…63 UOC-TV UPCOR-PAR 45 47
A016 LOCOR-PAR
0…63 UOC-TV LOCOR-PAR 42 44
A017 E/W-TRAP
0…63 UOC-TV E/W-TRAP 32 32
A018 VER-AMP-N60
0…63 UOC-TV VER-AMP-N60 32 22
A019 VER-SHI-N60
0…63 UOC-TV VER-SHI-N60 25 24
A020 HOR-SHI-N60
0…63 UOC-TV HOR-SHI-N60 45 49
A021 EW-W-N60
0…63 UOC-TV EW-W-N60 40 41
A022 VER-AMP-P50
0…63 UOC-TV VER-AMP-P50 32 21
A023 VER-SHI-P50
0…63 UOC-TV VER-SHI-P50 32 25
A024 HOR-SHI-P50
0…63 UOC-TV HOR-SHI-P50 32 44
A025 EW-W-P50
0…63 UOC-TV EW-W-P50 32 40
A026 VX-43-COMPRESS
0…63 UOC-TV VX-43-COMPRESS 32 5
A027 VER-AMP-F50
0…63 UOC-TV VER-AMP-F50 32 32
A028 VER-SHI-F50
0…63 UOC-TV VER-SHI-F50 32 32
A029 HOR-SHI-F50
0…63 UOC-TV HOR-SHI-F50 32 32
A030 EW-W-F50
0…63 UOC-TV EW-W-F50 32 32
A031 VER-AMP-S50
0…63 UOC-TV VER-AMP-S50 32 32
A032 VER-SHI-S50
0…63 UOC-TV VER-SHI-S50 32 32
A033 HOR-SHI-S50
0…63 UOC-TV HOR-SHI-S50 32 32
A034 EW-W-S50
0…63 UOC-TV EW-W-S50 32 32
A035 SUB-SLOPE-S
0…63 UOC-TV SUB-SLOPE-S 32 32
A036 SUB-VX-S
0…63 UOC-TV SUB-VX-S 32 32
A037 VER-AMP-C50
0…63 UOC-TV VER-AMP-C50 32 32
A038 VER-SHI-C50
0…63 UOC-TV VER-SHI-C50 32 32
A039 HOR-SHI-C50
0…63 UOC-TV HOR-SHI-C50 34 34
A040 EW-W-C50
0…63 UOC-TV EW-W-C50 32 32
A041 SUB-SLOPE-C
0…63 UOC-TV SUB-SLOPE-C 32 32
A042 SUB-VX-C
0…63 UOC-TV SUB-VX-C 32 32
A043 VER-AMP-P60
0…63 UOC-TV VER-AMP-P60 32 22
A044 VER-SHI-P60
0…63 UOC-TV VER-SHI-P60 32 24
A045 HOR-SHI-P60
0…63 UOC-TV HOR-SHI-P60 32 49
A046 EW-W-P60
0…63 UOC-TV EW-W-P60 32 41
A047 VER-AMP-F60
0…63 UOC-TV VER-AMP-F60 32 32
A048 VER-SHI-F60
0…63 UOC-TV VER-SHI-F60 32 32
A049 HOR-SHI-F60
0…63 UOC-TV HOR-SHI-F60 32 32
A050 EW-W-F60
0…63 UOC-TV EW-W-F60 32 32
A051 VER-AMP-S60
0…63 UOC-TV VER-AMP-S60 32 32
A052 VER-SHI-S60
0…63 UOC-TV VER-SHI-S60 32 32
A053 HOR-SHI-S60
0…63 UOC-TV HOR-SHI-S60 32 32
A054 EW-W-S60
0…63 UOC-TV EW-W-S60 32 32
A055 VER-AMP-C60
0…63 UOC-TV VER-AMP-C60 32 32
A056 VER-SHI-C60
0…63 UOC-TV VER-SHI-C60 32 32
A057 HOR-SHI-C60
0…63 UOC-TV HOR-SHI-C60 32 32
A058 EW-W-C60
0…63 UOC-TV EW-W-C60 32 32
A059 OF-ROTATE 0…127 UOC-TV OF-ROTATE 63 0
SETTING DATA
OSD
INITIAL DATA
ITEM
EEPROM SETTING
DATA RANGE
IC
A060 DRI-RS
0…63 UOC-TV DRI-RS 32 32
A061 DRI-GS
0…63 UOC-TV DRI-GS 32 32
A062 DRI-BS
0…63 UOC-TV DRI-BS 32 32
A063 CUT-RS
0…63 UOC-TV CUT-RS 32 32
A064 CUT-GS
0…63 UOC-TV CUT-GS 32 32
A065 DRI-RC
0…63 UOC-TV DRI-RC 32 32
A066 DRI-GC
0…63 UOC-TV DRI-GC 32 32
A067 DRI-BC
0…63 UOC-TV DRI-BC 32 32
A068 CUT-RC
0…63 UOC-TV CUT-RC 32 32
A069 CUT-GC
0…63 UOC-TV CUT-GC 32 32
A070 DRI-RW
0…63 UOC-TV DRI-RW 32 32
A071 DRI-GW
0…63 UOC-TV DRI-GW 32 32
A072 DRI-BW
0…63 UOC-TV DRI-BW 32 32
A073 CUT-RW
0…63 UOC-TV CUT-RW 32 32
A074 CUT-GW
0…63 UOC-TV CUT-GW 32 32
A075 DRI-RS-DVD
0…63 UOC-TV DRI-RS-DVD 32 32
A076 DRI-GS-DVD
0…63 UOC-TV DRI-GS-DVD 32 32
A077 DRI-BS-DVD
0…63 UOC-TV DRI-BS-DVD 32 32
A078 CUT-RS-DVD
0…63 UOC-TV CUT-RS-DVD 32 32
A079 CUT-GS-DVD
0…63 UOC-TV CUT-GS-DVD 32 32
A080 DRI-RC-DVD
0…63 UOC-TV DRI-RC-DVD 32 32
A081 DRI-GC-DVD
0…63 UOC-TV DRI-GC-DVD 32 32
A082 DRI-BC-DVD
0…63 UOC-TV DRI-BC-DVD 32 32
A083 CUT-RC-DVD
0…63 UOC-TV CUT-RC-DVD 32 32
A084 CUT-GC-DVD
0…63 UOC-TV CUT-GC-DVD 32 32
A085 DRI-RW-DVD
0…63 UOC-TV DRI-RW-DVD 32 32
A086 DRI-GW-DVD
0…63 UOC-TV DRI-GW-DVD 32 32
A087 DRI-BW-DVD
0…63 UOC-TV DRI-BW-DVD 32 32
A088 CUT-RW-DVD
0…63 UOC-TV CUT-RW-DVD 32 32
A089 CUT-GW-DVD
0…63 UOC-TV CUT-GW-DVD 32 32
A090 SUB-BRI
0…63 UOC-TV SUB-BRI 32 39
A091 SUB-BRI-DVD
0…63 UOC-TV SUB-BRI-DVD 32 38
A092 SUB-COL
0…63 UOC-TV SUB-COL 32 34
A093 SUB-CON
0…63 UOC-TV SUB-CON 32 48
A094 SUB-CON-DVD
0…63 UOC-TV SUB-CON-DVD 32 49
A095 SUB-TINT-DVD
0…63 UOC-TV SUB-TINT-DVD 32 34
A096 SUB-TINT
0…63 UOC-TV SUB-TINT 32 34
A097 SUB-SHARP
0…63 UOC-TV SUB-SHARP 32 12
A098 P-POSOFH-50
0…31 PIP P-POSOFH-50 015
A099 P-POSOFV-50
0…7 PIP P-POSOFV-50 04
A100 P-POSOFH-60
0…31 PIP P-POSOFH-60 016
A101 P-POSOFV-60 0…7 PIP P-POSOFV-60 04
A102 P-SUB-TINT
0…63 PIP P-SUB-TINT 038
A103 P-CON-CTM 0…15 PIP P-CON-CTM 04
A104 P-CON-DYN
0…15 PIP P-CON-DYN 09
A105 P-CON-STD
0…15 PIP P-CON-STD 04
A106 P-CON-SOFT
0…15 PIP P-CON-SOFT 04
A107 P-SUB-BRI
0…15 PIP P-SUB-BRI 02
A108 P-BKGD-R
0…15 PIP P-BKGD-R 00
A109 P-BKGD-G
0…15 PIP P-BKGD-G 00
A110 P-BKGD-B
0…15 PIP P-BKGD-B 00
A111 P-SUB-COL
0…15 PIP P-SUB-COL 08
A112 P-SHP-MAIN-TV
0…7 PIP 7 3
A113 VSD
0/1 UOC-TV VSD 0 0
A114 CUT OFF
0…63 UOC-TV CUT OFF 6 6
A115 VG2
0/1 UOC-TV VG2 0 1
A116 DCXO
0…127 UOC-TV DCXO 79 69
A117 DCXO-AUTO 0/1 UOC-TV DCXO-AUTO 0 0
OSD
INITIAL DATA
SETTING DATA
ITEM
EEPROM SETTING
DATA RANGE
IC
P-SHP-MAIN-TV
8
29K-FD5RU
29K-FG5RU
8-1 8-2
ITEM EEPROM SETTING DATA RANGE IC OSD INITIAL DATA SETTING DATA
S001 V-LINCTRL 0…2UOC-TV V-LINCTRL 0 0
S002 IFPLL 0…63 UOC-TV IFPLL 32 32
S003 SOC1-0 0…3UOC-TV SOC1-0 0 1
S004 WHITE LMT 0…15 UOC-TV WHITE LMT 0 12
S005 GD 0/1 UOC-TV GD 1 1
S006 AGC0-1 0…3UOC-TV AGC0-1 1 1
S007 FFI 0/1 UOC-TV FFI 0 0
S008 CFA0 0/1 UOC-TV CFA0 0 0
S009 YD PAL 0…15 UOC-TV YD PAL 7 11
S010 YD SECAM 0…15 UOC-TV YD SECAM 7 11
S011 YD N358 0…15 UOC-TV YD N358 7 9
S012 YD N443 0…15 UOC-TV YD N443 7 7
S013 YD AV-PAL 0…15 UOC-TV YD AV-PAL 7 7
S014 YD AV-SECAM 0…15 UOC-TV YD AV-SECAM 7 7
S015 YD AV-N358 0…15 UOC-TV YD AV-N358 7 7
S016 YD AV-N443 0…15 UOC-TV YD AV-N443 7 7
S017 YD SAV-PAL 0…15 UOC-TV YD SAV-PAL 7 7
S018 YD SAV-SECAM 0…15 UOC-TV YD SAV-SECAM 7 7
S019 YD SAV-N358 0…15 UOC-TV YD SAV-N358 7 7
S020 YD SAV-N443 0…15 UOC-TV YD SAV-N443 7 7
S021 YD COMP-PAL 0…15 UOC-TV YD COMP-PAL 7 7
S022 YD COMP-SECAM 0…15 UOC-TV YD COMP-SECAM 7 7
S023 YD COMP-N358 0…15 UOC-TV YD COMP-N358 7 7
S024 YD COMP-N443 0…15 UOC-TV YD COMP-N443 7 7
S025 SBO1-0 0…3UOC-TV SBO1-0 1 1
S026 CHSE1-0 0…3UOC-TV CHSE1-0 2 1
S027 FCO 0/1 UOC-TV FCO 0 0
S028 OSO 0/1 UOC-TV OSO 1 1
S029 DFL 0/1 UOC-TV DFL 1 1
S030 EVG 0/1 UOC-TV EVG 1 1
S031 HCO 0/1 UOC-TV HCO 1 1
S032 SVMA 0/1 UOC-TV SVMA 1 1
S033 FBC 0/1 UOC-TV FBC 0 0
S034 SLG1-0 0…3UOC-TV SLG1-0 1 1
S035 CL3-0 0…15 UOC-TV CL3-0 7 7
S036 GAM 0/1 UOC-TV GAM 1 1
S037 TFR 0/1 UOC-TV TFR 0 1
S038 CLD 0/1 UOC-TV CLD 0 0
S039 BKS 0/1 UOC-TV BKS 1 1
S040 BSD 0/1 UOC-TV BSD 0 1
S041 AAS 0…3UOC-TV AAS 1 1
S042 DSK-EXT 0/1 UOC-TV DSK-EXT(DSK) 1 1
S043 BLS 0/1 UOC-TV BLS 0 1
S044 LLB 0/1 UOC-TV LLB 0 0
S045 DSA 0/1 UOC-TV DSA 0 1
S046 RPA1-0 0…2UOC-TV RPA1-0 0 2
S047 RPO1-0 0…3UOC-TV RPO1-0 3 3
S048 COR1-0 0…3UOC-TV COR1-0 2 1
S049 CRA0 0/1 UOC-TV CRA0 0 0
S050 SPR2-0 0…6UOC-TV SPR2-0 0 5
S051 SVM2-0 0…7UOC-TV SVM2-0 5 3
S052 SMD1-0 0…3UOC-TV SMD1-0 3 3
S053 PEAKFREQPAL443 0…3UOC-TV PEAKFREQPAL443 0 1
S054 PEAKFREQPALM 0…3UOC-TV PEAKFREQPALM 0 0
S055 PEAKFREQPALN 0…3UOC-TV PEAKFREQPALN 0 0
S056
PEAKFREQNTSC443
0…3UOC-TV
PEAKFREQNTSC443
01
S057 PEAKFREQNTSCM 0…3UOC-TV PEAKFREQNTSCM 0 0
S058 PEAKFREQSECAM 0…3UOC-TV PEAKFREQSECAM 0 0
S059 PEAKFREQAV 0…3UOC-TV PEAKFREQAV 0 3
Setting Mode 1-1
ITEM EEPROM SETTING DATA RANGE IC OSD INITIAL DATA SETTING DATA
!
!
" "
" "
!
" "
" "
" " "
"" " ""
"" " ""
" " "
"" " ""
$%%&'( )*$
9
29K-FD5RU
29K-FG5RU
9-1 9-2
ITEM EEPROM SETTING DATA RANGE IC OSD INITIAL DATA SETTING DATA
S119 PHI FORCE 0/1 UOC-TV PHI FORCE 1 1
S120 PHI 0…3 UOC-TV PHI 3 3
S121 BPD 0/1 UOC-TV BPD 0 0
S122 E2D 0/1 UOC-TV E2D 0 0
S123 ACL 0/1 UOC-TV ACL 1 1
S124 MUS 0/1 UOC-TV MUS 0 1
S125 CB 0/1 UOC-TV CB 1 0
S126 SVM-OSD-PW 0…3 UOC-TV SVM-OSD-PW 3 3
S127 SMD-OSD-TM 0…7 UOC-TV SMD-OSD-TM 2 2
S128 XDT 0/1 UOC-TV XDT 0 1
S129 HBL 0/1 UOC-TV HBL 1 1
S130 WBF UOC-TV WBF 10 6
S131 WBR 0…15 UOC-TV WBR 8 13
S132 FSL 0/1 UOC-TV FSL 0 0
S133 HP2 0/1 UOC-TV HP2 0 0
S134 CUR_VPOS 0..63 UOC-TV CUR_VPOS 20 20
S135 OSVE 0/1 UOC-TV OSVE 0 1
S136 GAIN-RED 0..127 UOC-TV GAIN-RED 20 20
S137 GAIN GREEN 0..127 UOC-TV GAIN GREEN 20 20
S138 GAIN BLUE 0..127 UOC-TV GAIN BLUE 20 20
Setting Mode 1-3
0..32
AUTO-ACG-MAX UOC-TV 15 15
S139 AUTO-ACG-MAX
0…15
S238 P-SCADJ-N4 0…31 PIP P-SCADJ-N4 7 7
S239 P-SCADJ-S
0…31 PIP P-SCADJ-S 7 7
S240 P-PKLR
0…255 PIP P-PKLR 80 190
S241 P-PKLG 0…255 PIP P-PKLG 80 190
S242 P-PKLB 0…255 PIP P-PKLB 80 190
S243 P-YCOR 0/1 PIP P-YCOR 1 1
S244 P-PALIDL2 0/1 PIP P-PALIDL2 0 0
S245 P-PALIDL1 0…3 PIP P-PALIDL1 1 1
S246 P-PALIDL0 0/1 PIP P-PALIDL0 0 0
S247 P-PKBOOST 0/1 PIP P-PKBOOST 1 1
S248 P-CLPLEN 0…3 PIP P-CLPLEN 0 0
S249 P-SCMREL 0…3 PIP P-SCMREL 2 2
Setting Mode 2-1
ITEM EEPROM SETTING
DATA RANGE IC OSD INITIAL DATA SETTING DATA
S201 P-POSHOR
0…255 PIP P-POSHOR 44 28
S202 P-POSVER-50
0…255 PIP P-POSVER-50 30 22
S203 P-POSVER-60 0…255 PIP P-POSVER-60 26 23
S204 P-HFP 0…15 PIP P-HFP 0 7
S205 P-VFP 0…15 PIP P-VFP 0 8
S206 P-VSPDEL-50 0…31 PIP P-VSPDEL-50 13 13
S207 P-VSPDEL-60 0…31 PIP P-VSPDEL-60 13 13
S208 P-VERBLK 0/1 PIP P-VERBLK 0 0
S209 P-SELDEL 0…15 PIP P-SELDEL 8 8
S210 P-CLPDEL 0…31 PIP P-CLPDEL 6 6
S211 P-AGCMD 0…3 PIP P-AGCMD 3 3
S212 P-AGCVAL 0…15 PIP P-AGCVAL 8 8
S213 P-CLMPID 0…3 PIP P-CLMPID 3 3
S214 P-BLKVCHYS 0/1 PIP P-BLKVCHYS 0 0
S215 P-BLKCVAL 0/1 PIP P-BLKCVAL 0 0
S216 P-LMOFST 0…3 PIP P-LMOFST 0 0
S217 P-PLLITC-TV 0…3 PIP P-PLLITC-TV 2 2
S218 P-PLLITC-AV 0…3 PIP P-PLLITC-AV 1 1
S219 P-BLKVCFIL 0/1 PIP P-BLKVCFIL 0 0
S220 P-YCD-TV-P 0…15 PIP P-YCD-TV-P 8 8
S221 P-YCD-TV-N3 0…15 PIP P-YCD-TV-N3 8 8
S222 P-YCD-TV-N4 0…15 PIP P-YCD-TV-N4 8 8
S223
P-YCD-TV-S 0…15 PIP P-YCD-TV-S 8 8
S224 P-YCD-AV-P 0…15 PIP P-YCD-AV-P 8 8
S225 P-YCD-AV-N3 0…15 PIP P-YCD-AV-N3 8 8
S226 P-YCD-AV-N4 0…15 PIP P-YCD-AV-N4 8 8
S227 P-YCD-AV-S 0…15 PIP P-YCD-AV-S 8 8
S228 P-LOCKSP 0/1 PIP P-LOCKSP 0 0
S229 P-CKILL 0…3 PIP P-CKILL 0 0
S230 P-BGPOS 0/1 PIP P-BGPOS 1 1
S231 P-DEEMP 0…3 PIP P-DEEMP 0 0
S232 P-COLON 0/1 PIP P-COLON 0 0
S233 P-CHRBW 0…3 PIP P-CHRBW 0 0
S234 P-IFCOMP 0…3 PIP P-IFCOMP 2 2
S235 P-SATNR 0/1 PIP P-SATNR 1 1
S236 P-SCADJ-P 0…31 PIP P-SCADJ-P 7 7
S237 P-SCADJ-N3
0…31 PIP P-SCADJ-N3 7 7
Note: SETTING DATA effectives for model 29K-FD5RU only.
10
29K-FD5RU
29K-FG5RU
10-1 10-2
S277 P-CLMPCHRY 0…3 PIP P-CLMPCHRY 0 0
S278 P-VDETIFS
0/1 PIP P-VDETIFS 1 1
S279 P-VDETITC
0/1 PIP P-VDETITC 0 0
S280 P-VLP 0…3 PIP P-VLP 1 1
S281 P-LATENCY 0…3 PIP P-LATENCY 3 3
S282 P-FILTBRST 0/1 PIP P-FILTBRST 1 1
S283 P-CLMPIST 0…31 PIP P-CLMPIST 26 26
S284 P-UVSEQ 0/1 PIP P-UVSEQ 0 0
S285 P-ABRTHD 0…15 PIP P-ABRTHD 0 0
S286 P-ABRSPD 0…7 PIP P-ABRSPD 0 0
S287 P-CZMEN 0/1 PIP P-CZMEN 0 0
S288 P-CZMSP 0…3 PIP P-CZMSP 0 0
S289 P-U-COL-DYN 0..60PIPP-U-COL-DYN 0 30
S290 P-U-COL-STD 0..60 PIP P-U-COL-STD 0 30
S291 P-U-COL-SOFT 0..60 PIP P-U-COL-SOFT 0 30
S292 P-U-SHP-DYN 0..60 PIP P-U-SHP-DYN 0 30
S293 P-U-SHP-STD 0..60 PIP P-U-SHP-STD 0 30
S294 P-U-SHP-SOFT 0..60 PIP P-U-SHP-SOFT 0 30
S295 P-SHP-MAIN-AV
0…3 PIP P-SHP-MAIN-AV 2 3
S296 P-MAT
0…3 PIP P-MAT 0 0
Setting Mode 2-2
ITEM EEPROM SETTING
DATA RANGE IC OSD INITIAL DATA SETTING DATA
S250 P-SCMIDL 0…7 PIP P-SCMIDL 5 5
S251 P-SECDIV 0/1 PIP P-SECDIV 1 1
S252 P-BELLIIR 0/1 PIP P-BELLIIR 1 1
S253 P-PALINC1 0/1 PIP P-PALINC1 0 0
S254 P-PALINC2 0/1 PIP P-PALINC2 0 0
S255 P-LOCKSP 0…3 PIP P-LOCKSP 3 3
S256 P-SECACCL 0…7 PIP P-SECACCL 5 5
S257 P-SECACC 0/1 PIP P-SECACC 1 1
S258 P-ADLCK 0/1 PIP P-ADLCK 1 1
S259 P-ADLCKSEL 0/1 PIP P-ADLCKSEL 1 1
S260 P-ADLCKCC 0/1 PIP P-ADLCKCC 1 1
S261 P-CLRANGE 0…3 PIP P-CLRANGE 1 1
S262 P-NADJ 0…7 PIP P-NADJ 3 3
S263 P-NSRED 0…7 PIP P-NSRED 6 6
S264 P-SLLTHD 0…3 PIP P-SLLTHD 0 0
S265 P-ISHFT 0…3 PIP P-ISHFT 3 3
S266 P-ENLIM 0/1 PIP P-ENLIM 1 1
S267 P-DTECT5060 0/1PIP P-DTECT5060 1 1
S268 P-VTHRL50 0…127 PIP P-VTHRL50 41 41
S269 P-BCOROFF 0/1 PIP P-BCOROFF 0 0
S270 P-VTHRL60 0…127 PIP P-VTHRL60 60 60
S271 P-VTHRH50 0…15 PIP P-VTHRH50 8 8
S272 P-VTHRH60 0…15 PIP P-VTHRH60 13 13
S273 P-CLMSTGY
0/1 PIP P-CLMSTGY 0 0
S274 P-SLLTHDV
0…7 PIP P-SLLTHDV 0 0
S275 P-VFLYWHLM
0…3 PIP P-VFLYWHLM 1 1
S276 P-VFLYWHL
0/1 PIP P-VFLYWHL 1 1
ITEM EEPROM SETTING DATA RANGE IC OSD INITIAL SETTING DATA
DATA
! !
"# "#
# #
"$%# "$%#
!$ !$
""$ ""$
!$ !$
$ $
!$ !$
$ $
!" !"
" !"
!" "
" "
" "
" "
"!% "!%
" "
$" $"
$ $
$ $
#! #!
# #
# #
! !
$$ $$
# #
!" !"
!" !"
# #
!" !"
!" !"
" "
! !
$ $
#$ #$
&$ &$
&$ &$
&'$ &'$
&'$ &'$
&'$ &'$
# #
& &
& &
&' &'
())*+, -.(
FD5RU FG5RU
11
29K-FD5RU
29K-FG5RU
11-1 11-2
ITEM EEPROM SETTING DATA RANGE IC OSD INITIAL SETTING DATA
DATA
!""#$% &'!
( (
FD5RU FG5RU
PIF ADJUSTMENT
No.
Adjustment point
Adjustment condition/procedureWaveform or remarks
RF-AGC
TAKE OVER
POINT AD-
JUSTMENT
(I
2
C BUS
CONTROL)
1
±
! ! "
# $ %& %'( )
%!" * +'
& ,-) ! .'! /
.' ,-) 0' 0 %'
'$' $ $ 1 2
1 0 * !3!'! -
$' 4& 2 45
!6 '
%' '$ $' 71 2 7 0 '
! ' 0
,
8% 9:8%/;<%
> ! !-
"
# ,-) ! .'! /
& ' ,-) 0' 5 0' $? * @
* $$ .'!
* 6 $ $?
$' 4& 2 45
!6 '
%' '$ $' 71 2 7 0
' ! ' 0
12
29K-FD5RU
29K-FG5RU
12-1 12-2
PURITY ADJUSTMENT
No.
Adjustment point
Adjustment conditions/procedureWaveform or remarks
PURITY ADJ. 1. Select the green monocolor screen with remote
contoller, and set the beam current of 1.7mA
with the contrast control.
2. Degauss the CRT enough with the degausing coil.
Note: Follow the job instruction manual to
adjust the magnetic field.
.
3. The purity magnet must be previously set at the
0 magnetic field, and the convergence must be
adjusted to be rough.
With P-MAG, adjust it to the center - rank A.
4. Observe the points a,b, as shown in Fig.1-1
through the microscope.
Move DY fore and aft to set the landing at the
point (Rank A).
5. If the a/b balance is poor, compensate it to the
center "Rank AB".
6. Aline it to zero, keeping the raster rotation in the
east direction.
6. Tighten the deflection coil fastening screws.
»Tightening torque : 108N ±20N (11Kgf ±2Kgf)
8. Checking the CRT corner area, bond the mag-
netic sheet to set the landing at rank A for com-
pensation.
Note: Apply the adjustment after aging with
the beam current 1700
±
50
µ
A or more
for 30 minutes or more.
Note: Select the service mode, and press the
monocolor key of R/C for process, and
the monocolor screen (green) will be
selected.
1
ab
A
B
A
90mm 90mm
B
A = B
A = B
Fig.1-1
Fig. 1-2
Rank "A"
(on the right of the CRT)
Fig. 1-3
Rank "A"
(on the left of the CRT)
*Continuosly press the mono-
colour key 1 second or more,
and the monocolour mode will
be selected without the service
mode.
*Even with TEXT key or "R/G/B"
key, it can be directly switched to
each monocolor screen.
Monocolour
screen release
Monocolour
GREEN
screen
Monocolour
BLUE
screen
Monocolour
RED
screen
*Adjustment for uniformity is change to another
content. Please refer to the following page.
*Every push of the monocolour key changes the
screen as follows.
PURITY ADJUSTMENT
No.
Adjustment point
Adjustment conditions/procedure Waveform or remarks
Uniformity
adjustment (To
perform after
the purity and
convergence
adjustment.)
2Before adjustment begin,Horizontal magnetic field
= 0G
Vertical magnetic field = Each destination's adjust-
ment magnetic field.
Make sure to degauss it.
(North direction Red uniformity)
1. Horizontal mf = Set to monocolor screen red and
adjust to +0.25G.
2. Pay attention to the edge of CRT,if the landing is
poor adjust by attaching the the compensation
magnet at the back of CRT.
(refer to Fig-1)
(South direction Red uniformity)
1. Horizontal mf = Set to monocolor screen red and
adjust to -0.25G.
2. Pay attention to the edge of CRT ,if the landing is
poor adjust by attaching the compensation mag-
net at the back of CRT.
(The same method is applied for adjustment of
monocolor screen blue for blue uniformity ,and
changing both the magnetic field for north and south
direction.)
*During the pasting of compensation magnet , use
the crosshatch pattern .
Make sure there is no blur or bendlines occur.
If the blur or bend are serious,adjust the location
of compensation magnet to make it better.
(CRT surface)
(CRT back)
Miss landing
Compensation magnet
Fig. 1
13
29K-FD5RU
29K-FG5RU
13-1 13-2
BRRB
BRRB
B
X axis
Y axis
CONVERGENCE ADJUSTMENT
No.
Adjustment point
Adjustment conditions/procedureWaveform or remarks
CONVERGENC
ADJ.
( To be done
after the purity
adjustment.)
1. Receive the " Crosshatch Pattern" signal.
2. Using the remote controller, call NORMAL mode.
( Static convergence )
1. Overlap blue and red with the open-/closing an-
gle and rotation of the 4 pole magnet.
2. Overlap green on blue and red with the open-/
closing angle and rotation of the 6 pole magnet.
( Dynamic convergence )
1. Fix the wedges in a position so that the deflection
york neck is at the center of top bottom and left
right. ( Straight line and without any blur horizon-
tal / vertical line).
2. Adjust the Red, Blue, upper and lower of the cen-
tre y axis on the screen by using the Volume (VR2,
VR1)at the deflection york.
(Refer to fig.1 and fig.2)
3. If the Horizontal Red, Blue(XV) on the screen
centre X axisis shifted, correct the Red, Blue (XV)
by adjusting the balance coil on the deflection
york. (Refer to Fig. 3)
4. After confirm that there is no problems on the
entire screen ,bond each wedge on CRT and
glass tape on it. Fastening the screws of DY and
magnet unit (purity , 4 - pole and 6 - pole), then
coat the lacquer paint on DY fastening screw and
magnet unit fastening screw.
Note:
In case of poorconvergence adjustmet on the
top and bottom and of the screen, adjust DY
by swing rightward and leftward.
(Refer to Fig-4)
1
Fig. 1
Adjust by VR1
Fig. 2
Adjust by VR2
Fig. 3
Adjust by Balance Coil
CRT NECK
Lacquer
Purity Magnet
4-Pole Magnet
6-Pole Magnet.
25mm ±0.5mm
VR2
VR1
Balance Coil
Fig. 4
Adjust by Swing DY
R
FOCUS ADJUSTMENT
No.
Adjustment point
Adjustment conditions/procedure Waveform or remarks
FOCUS
ADJUSTMENT
1. Receive E-5CH (Monoscop pattern).
2. With the remote controller, make the image nor-
mal.
3. Adjust the focus VR to make the character"575"
on left bottom of monoscope as fine as possible.
1
CUT-OFF, BACKGROUND AND SUB-CONTRAST ADJUSTMENT
No.
Adjustment point
Adjustment conditions/procedureWaveform or remarks
CRT CUTOFF
ADJUSTMENT
(I
2
C BUS
CONTROL)
Note :
1. Before CRT cutoff adjustment, make sure fol-
lowing items are in INITIAL DATA.
a) A063 CUT-RS = 32
b) A064 CUT-GS = 32
c) A114 CUT OFF = 6
1. Switch TV to video mode , blue back off , with no
video signal and Press R/C to set picture into
normal condition.
2. Go to service mode at adjustment mode item A115
(VG2).
3. Adjust screen voltage until retrace line appear,
the following OSD will appear at bottom of screen.
UNSTABLE
OUT
ABOVE
4. Finally , slowly decrease the screen variable re-
sistor until following OSD appear.
STABLE
IN
ABOVE / BELOW*
* The last OSD row is the indication of the screen
voltage value. If it show "BELOW", please in-
crease the screen voltage and vice versa until
"STABLE" AND "IN" OSD appear.
Note :No matterthe indicationof last row's OSD is
indicate"ABOVE"or "BELOW",the important
thing is OSD change to "STABLE" and "IN".
1
14
29K-FD5RU
29K-FG5RU
14-1 14-2
!! "#$%! ! !#!&
"'( )
(
*
+, ()-
.
. /
011 #! % 0
2#3 2!#! 45667 %!
#
50% white Dark white
1. Receive the window pattern with the DVD signal
(component signal).
2. Adj st the colo r temperat re of the 50% white
sing the data of DRI-GS-DVD and DRI-BS-DVD.
3. Adj st the colo r temperat re of the dark area s-
ing the data of CUT-RS-DVD and CUT-GS-DVD.
4. Go back to 50% white area to check colo r temp-
erat re, if o t of range, please go back to step (2).
5/ 38 0 # #%! #22 .6
! ! 10 0 9# !! 5:66
±
<6=
*/ %! %0 0 # # #9$
+*- > +?- 0 ## % 931 #
%331
DRI-RS-DVD =32 (FIXED)
DRI-RC-DVD =*1
DRI-GC-DVD =*2
DRI-BC-DVD = DRI-BS-DVD
CUT-RC-DVD = CUT-RS-DVD
CUT-GC-DVD = CUT-GS-DVD
DRI-RW-DVD = 32 (FIXED)
DRI-GW-DVD = *3
DRI-BW-DVD = *4
CUT-RW-DVD = CUT-RS-DVD
CUT-GW-DVD = CUT-GS-DVD
/ ! 0 #9$ @5 > @? ## $#3 0
# #3# # 0 # %!
, 2#3
+-
7500K X : 0.300 Y : 0.310
18000K X : 0.255 Y : 0.255
17000K X : 0.261 Y : 0.261
12300KX:0.272 Y : 0.275
(With Monolta color thermometer
CA-100)
* 12300¡K
DRI-GW = "DRI-GS" - 7
DRI-BW = "DRI-BS" - 7
DRI-GC = "DRI-GS" - 7
DRI-RC = 25
* 17000¡K & 18000¡K
DRI-GW = "DRI-GS" - 7
DRI-BW = "DRI-BS" - 7
DRI-GC = "DRI-GS" - 5
DRI-RC = 27
* 7500¡K
DRI-GW = "DRI-GS" - 5
DRI-BW = "DRI-BS" - 5
DRI-GC = "DRI-GS" - 7
DRI-RC = 25
5 /
4 A $#3 %! #0 3!
!#!
* /
$#3 % @5 > @? %! #0 3!
!#!
!! "#$%! ! !#!&
"'( )
(
*
+,(
()-
!
" # !$
% & "'( )
* +* + ,-
./01 2 # #%! #33 45
! ! 62 2 7# !!.855
9
:5;
+ 2 62 ! 3! 0! !-
*
"''. / 0 ''' 1 0 ''
%'''./0'"" 1 0 '""
'''. / 0 ' 1 0 '
''. / 0 ' 1 0 ' "
,2
!)''-
3 ''4.
56)&2 7 856)&98 )
56):2 7 856):98 )
56)& 7 856)&98 )
56) 7 "
3 '''4. ; %'''4.
56)&2 7 856)&98 )
56):2 7 856):98 )
56)& 7 856)&98 ) "
56) 7
3 "''4.
56)&2 7 856)&98 ) "
56):2 7 856):98 ) "
56)& 7 856)&98 )
56) 7 "
4 /
266 #! % 2
3#0 3!#! <.55= %!
#
"'( 5
!#< "'(
+ # 56)&9 # 56):9
!#< #
+ # =>)9 # =>)&9
> ) + ) #
56)9 7 ,6/?5-
56) 73
56)& 73
56): 7 56):9
=>) 7 =>)9
=>)& 7 =>)&9
56)2 7 ,6/?5-
56)&2 73
56):2 7 3
=>)2 7 =>)9
=>)&2 7 =>)&9
*/ %! %2 2 # # #7$
+=- > +?- 2 ## % 706 #
%006
. /
< @ $#0 %! #2 0!
!#!
* /
$#0 % A. > AB %! #2 0!
!#!
+-
15
29K-FD5RU
29K-FG5RU
15-1 15-2
!" " #$%&" " "$"'
(
!
(()*
" # $ %& !
(()*
" " "
' !
(()*
" " "
' !
#(#()*
" # $ (& !
(
" $ " !
(
!
(
$
+(
$
(
" ) # $ " "
"$ " $ * "$ "!
(,#
" ) # $ " "
"$ " $ + "$ "!
!#(
" ) # $ " " "
"$ " $ "$ " , - $
$" ) "$ "!
(
" ) # $ " "
" "$ " $ "$ " $
$" . "$ "!
(
" ) # $ " "
" "$ " $ "$ " $
$" , "$ "!
#(
" ) # $ " " "
"$ " $ "$ " $$ "
# $ ! $ )
$$ " # $ ! $
$ / "$ "!
((-*
" # $ 0& !
((-*
" " "
' !
)
)
.
,
/
12
1345
*
+
3
64
3647
64
$ 2$ $ " $
$ "#!
!! "#$%! ! !#!&
'(
)'
*
+,
)- '+,
! "
# $%"%&'() *+
, *+ ! "
-
±
-. "
.
'(
)'
*
+,
)-' '+,
/ +
! "
$%"%&'() *+
, *+ !
-
±
-.
/
'
*
)-' '+,
/ +
! "
$%"01)/) *+
, *+ .-2
-
±
-
0 #& ! 1 - #2!#3 1 !
$4 # 5%! 1#44 -
61 1 #
)7" %! 1!$ #,
8
'
*
)- '+,
$%"01)/) *+
, *+ .-2
-
±
-
0 #& ! 1 - #2!#3 1 !
$4 # 5%! 1#44 -
61 1 #
)7" %! 1 !$ #,
9
.-2 !
:0
;<;% 2#2!##23=!
:>> #
*0
166 #! % 1
4#2 4!#! ?:>>8 %!
#
),
16
29K-FD5RU
29K-FG5RU
16-1 16-2
GAME OPERATION CHECK
No.
Adjustment point
Adjustment conditions/procedure Waveform or remarks
( For models
with GAME
only.)
1. Use the "GAME" key (R/C) to enter the Game
Mode.
2. Press the TREBLE UP (code=46H) key (direct
key to enter "The Rock" game), and then confirm
the position and the function of the game.
Note : (A) For the HORIZONTAL position, enter
service mode and choose "Setting Mode
1". Key in the alphabic number 114 to
enter GAME-HON. Adjust to the proper
horizontal position.
(B) For the VERTICAL position, remain in
same "Setting Mode 1". Key in the
alphabic number 115 to enter GAME-
VERT-1. Adjust to the proper vertical
position.
3. If adjustment OK, then press the "GAME MODE"
key to exit to previously viewed channel from the
game mode.
1
FM RADIO OPERATION CHECK
No.
Adjustment point
Adjustment conditions/procedure Waveform or remarks
( For models
with RADIO
only.)
1. Use the signal generator to set carier frequncy of
89.5 MHz with sound modulation 400Hz.
2. Connect the signal to the FM radio tuner using
the RF coaxial cable with female adaptor.
3. Press the "FM RADIO" button of R/C to access
the FM RADIO menu.
4. Select the "FREQUENCY" in menu and press the
VOL+ key to search the frequency of 89.5 MHz.
5. Confirm the 400 Hz audio is clearly detected.
6. Press the "FM RADIO" button of R/C to exit.
1
PAL CHROMA ADJUSTMENT
No.
Adjustment point
Adjustment conditions/procedure W veform or rem rks
SUB COLOUR
(I
2
C BUS
CONTROL)
! "#!$ %&'
" ( ) *+'
+ ,-.
/ + *0-.
/ 1) 231 2
4 2 5 1) 2
**6 7 8 ) 2 9.
8 231 :
1
:
5 ;
<$6 7 =**6 7
No.
Adjustment point
Adjustment conditions/procedure W veform or rem rks
SUB-TINT
(I
2
C BUS
CONTROL)
>/ $! 1
1 , #>
< "!?* ?'
(9@(
»
+ **,-. "'"( ) *+'
»
/ +
/ /(#> .A(/9>
@.9231 /(#> 2 )
8 : "72
'
1
NTSC CHROMA ADJUSTMENT
HORIZONTAL AND VERTICAL DEFLECTION LOOP ADJUSTMENT
No.
Adjustment point
Adjustment conditions/procedure W veform or rem rks
HOR-SHI-N60
8
8 "'
EW-W-N60
"'
NOTE :
There re no sep r te djustment for 16:9 mode
nd Norm l mode djustment.
The 16:9 (P nor m mode 50/60Hz) d t need to
follow the djusted d t for Norm l mode (50/
60Hz). Ple se set the d t s below.
VER-AMP-P50 = VER-AMP-N50
VER-SHI-P50 = VER-SHI-N50
HOR-SHI-P50 = HOR-SHI-N50
EW-W-P50 = EW-W-N50
VER-AMP-P60 = VER-AMP-N60
VER-SHI-P60 = VER-SHI-N60
HOR-SHI-P60 = HOR-SHI-N60
EW-W-P60 = EW-W-N60
5
/
;=7
231 *6
*0-.
:
8 8 /(#> 231 )
"'4 2 "*&?' 2 2
17
29K-FD5RU
29K-FG5RU
17-1 17-2
FUNCTION OPERATION CHECKING (VIDEO AND AUDIO)
No.
Adjustment point
Adjustment conditions/procedureWaveform or remarks
CONTRAST
key
1. Receive "Monoscope Pattern" signal.
2. Press to MENU mode, then Select Picture Mode
and set to select CONTRAST.
3. Press Volume Up/Down key to check whether the
CONTRAST effect is OK or not.
1
1. Receive "Colour Bar" signal.
2. Press to MENU mode, then Select Picture Mode
and set to select COLOUR.
3. Press Volume Up/Down key to check whether
the COLOUR effect is OK or not.
2COLOUR key
BRIGHTNESS
key
1. Receive "Monoscope Pattern" signal.
2. Press to MENU mode, then Select Picture Mode
and set to select BRIGHTNESS.
3. Press Volume Up/Down key to check whether
the BRIGHTNESS effect is OK or not.
3
TINT key 1. Receive the "NTSC Colour Bar" signal thru AV in.
2. Press to MENU mode, then Select Picture Mode
and set to select TINT.
3. Press Volume Up/Down key to check TINT, UP
for GREEN direction and DOWN for RED direc-
tion whether is OK or not.
4
SHARPNESS
Key
1. Receive "Monoscope Pattern" signal.
2. Press to MENU mode, then Select Picture Mode
and set to select SHARPNESS.
3. Press Volume Up/Down key to check whether
the SHARPNESS effect is OK or not.
5
WHITE TEMP 1. Receive "Monoscope Pattern" signal.
2. Set FUNCTION to select WHITE TEMP.
3. Press Volume Up/Down key to check WHITE
TEMP Option, STANDARD:
NORMAL SETTING, WARM for more REDDISH
direction changing, COOL for more BLUISH di-
rection changing.
NORMAL Key
7
1. Once in PICTURE Mode, and the NORMAL key
is pressed, all the settings will be present to nor-
mal setting.
(Normal setting value for every mode, refer to
Table 2.2 on page 6-1).
Notes:If nothing is display
mean contrast, colour, bright,
tint, sharpness are all in nor-
mal setting.
6
! "#$%& # &#'
(
)*)+
! "!# $%
! &! !%
"!#
!!' ! &! !
(
! "!# $
! &! !%
"!#
!!' ! &! !
) *+ ,,)-
! "!# $ +,,)
! &! !
*+ ,,)- "!#
!!' ! &! !
, *+ ,,).)/0 -
' 1 !
"!# $ +,,).)/0
! &! ! *+
,,).)/0- "!# !!' !
&! !
,
)
)*)+
-
*%2.3- *+2
- ! .4 5 !'# !'%
' ! &! ! 2.3 #
!'# !'' ! " ' &! !%
( *%5- *+2 %
- ! .4 2.3 !'# !''
! &! ! 5 #
!'# !'' ! " ' &! !
) *%.4- *+2
- ! 5 2.3 !'# !'%
' ! &! ! .4 #
!'# !'' ! " ' &! !%
& +2 ,6678
669 25+
±
/678 2:
( $"'" !'" # #!
!'' & ,6678 !'# # ! !'# !' ;!"
./
; < !; 727+
;!!&
$ 61%
) +
( ' ' !'" !! ! "$"'" "
' !'# # ;!"
' ' !
) !'# "' ;;
, = ' !'# !; 1 ! ""'"
..
18
29K-FD5RU
29K-FG5RU
18-1 18-2
1) Receive RF signal and AV input (atleast one of
them must be moving picture).
2) Using every key as below, check the operation of
the PIP operation.
PIP key : Use this key to activate and deactivate
the sub-picture.
MOVE key : Use this key to check the 4 corner
movement of sub-picture position.
SWAP key : Use this key to reverse images of the
sub-picture with the main picture.
FREEZE key : Use this key to make image of sub-
picture becomes static.
PIP TV/VIDEO : Use this key to switch TV/Video of
the sub-picture.
PIP-CH UP/DOWN : Use this key to switch channel
of sub-picture.
2PIP BRIGHTN-
ESS
1) Receive the RF monoscope pattern signal.
2) Activate the PIP sub-picture.
3) Select the MENU key, then go to INSET mode to
select the BRIGHTNESS.
(MENU ---> PICTURE ---> INSET
---> BRIGHTNESS)
4) Press the Volume Up/Down key to check the
BRIGHTNESS effect OK or NOT.
3PIP TINT 1) Receive the NTSC colour bar signal through AV
-in.
2) Activate the PIP sub-picture.
3) Select the MENU key, then go to INSET mode to
select the TINT.
(MENU ---> PICTURE ---> INSET ---> TINT)
4) Press the Volume Up/Down key to check the
TINT effect OK or NOT.
No.
Adjustment point
Adjustment conditions/procedure Waveform or remarks
PIP SUB-TINT1
PIP OPERATION CHECKING ( for model with PIP only)
.
! " #$ %& '
" #$ (%& '
!
" #"$
) *!!%
%
&
'
+*, #-
" #-. ..-.
- $ ##/
! #. 0 .#
.0 - $
±
%.
!
()* )) #"$
1 ) "- $ .# /
22 "- 2
- .-
1 ) "- $ .# /
- 22 / 2 3
- .-
+
&
' ,% -
+& +
./ -01
+*, #-
/ / . +!! .
-..' #
! " #-. ..-.
- $ ##/
#. -..' #
.0 - $
±
%.
2
"$ . 1 1
4-#5 - -
"-- 677 677
22 677
2#
*%, 677 677
"- 2 677
2 3 68
4-#5 -
"-- 677
22 677
2#
*%, 677
"- 2 68
9:
7; 9
±
%. 9:7<;
9:
7;
±
%. 9:7<;
19
29K-FD5RU
29K-FG5RU
19-1 19-2
TROUBLE SHOOTING FLOWCHART
NO RASTER
Check CRT connector (KY), (H) bias
(14V,120 V, 210 V line).
LED COLOUR ?
Power on by R/C.
Check protector
circuit and pin 106
& 107 (waveform
no.3 & 4) of IC
2100. Also check
the waveform no.7
of IC501 at pin 4
and its related
parts.
Check the power
circuit consisting of
IC701, IC702,
T701 and its
related parts. Also
check the
horizontal out
circuit Q604 and its
related parts.
GREEN
GREEN
Yes No
RED
RED
Does horizontal circuit
momentary oscillate?
Check the 14V,
120V and 210V
line from the
main PWB side.
Check R,G,B
input and output
of IC 851.
Normal Abnormal
TROUBLE SHOOTING FLOWCHART (Continued)
Check the power
circuit at the front
unit consisting of
IC4702, IC4701,
D4707 and its
related parts.
Check the power circuit
consisting of IC701, IC702,
T701 and its related parts.
Normal
Check F3700.
Replace the Fuse.
Is the Fuse again blown out?
Does STBY+5V appear at pin 1
P1001 main unit ?
Blown out
No
No Yes
Yes
Check F4701.
NO LED LIGHT
Check 3V output
from pin 22 of IC
2100 and its
related parts.
20
29K-FD5RU
29K-FG5RU
20-1 20-2
Check TU51.
TROUBLE SHOOTING FLOWCHART (Continued)
NO PICTURE
Does the snow noise appear
on the screen at maximum
contrast and brightness ?
A
Snow noise increase.
Does 5V appear at pin 7 of TU 51 ? Check the PC+5V line.
No
Does 31V appear at pin 9 of TU 51 ? Check +120V line at IC 753
and its related circuit.
Yes
No
Yes
No
Yes
TROUBLE SHOOTING FLOWCHART (Continued)
NO NORMAL SOUND
Set volume to maximum. Is
there any sound output signal
at pin 10 & 14 of IC 301 ?
YesNo
Check if there
is sound input
signal at pin 2
& 21 of IC 301.
No
Check output
signal at pin
68, 69 of IC
2100 and its
related circuit.
Check
connection to
the speaker
No sound from the
speaker
No sound comes
out at AV-out J905
Check sound
output signal from
pin 92 & 93 of IC
2100 and its
related circuit.
Set volume to maximum. Is
there any sound output signal
at pin 10 & 14 of IC 302 ?
YesNo
Check if there
is sound input
signal at pin 2
& 21 of IC 302.
No
Check Q301
and its related
circuit.
Check
connection to
the woofer
No sound from the
woofer
1*: for 29K-FD5RU
1*
Other manuals for 29K-FD5RU
1
This manual suits for next models
1
Table of contents
Other Sharp TV manuals
Sharp
Sharp SX68K7X User manual
Sharp
Sharp LC-20B2UA User manual
Sharp
Sharp LC-32HI3012E User manual
Sharp
Sharp UI7352E User manual
Sharp
Sharp 27R-S100 User manual
Sharp
Sharp 32UC4 User manual
Sharp
Sharp 36U-S610 User manual
Sharp
Sharp 66GF-64H User manual
Sharp
Sharp LC-22CFF4011E User manual
Sharp
Sharp LC-22LE250V User manual
Sharp
Sharp 21LF-90C User manual
Sharp
Sharp 13L-M100B User manual
Sharp
Sharp 21HT-15C User manual
Sharp
Sharp 21AG1-SMK3 User manual
Sharp
Sharp LC-70LE632U User manual
Sharp
Sharp LC-32LE154V User manual
Sharp
Sharp Aquos LC-22SV6U User manual
Sharp
Sharp BI2EA User manual
Sharp
Sharp LC-40FI5242KF Technical manual
Sharp
Sharp 27C24 User manual
