Shure Sound Isolating SE846 User manual

1/7
SE846 -- Sound Isolating™ Earphones
Sound Isolating™ Earphones
Shure Sound Isolating™ Earphones, built with balanced armature speakers, deliver a detailed soundstage free
from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a
durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit.
Choosing a Sleeve
Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably,
and easy to remove.
Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber.
Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the
ear canal. Hold in place for about ten seconds while the foam expands.
Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve.
Wearing the Earphones
Wear them like earplugs. A good acoustic seal provides maximum bass.
1. Select a sleeve.
2. Twist and pull to remove. Push new sleeve on fully. Compress foam sleeve slightly.
3. Insert firmly into ear. Wear cable over and behind ear. Tighten the cable and take up slack by raising the cable
cinch.
Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is
not forming a tight seal. Gently push the earphone deeper into the ear canal or try a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
Wearing the cable over the ear and securing it behind the head can help keep the earphones in place during phys-
ical activity.

Shure Incorporated
2/7
Changing Sleeves
•Twist and pull to remove the sleeve from the nozzle.
•Slide on a new sleeve so that it completely covers the barb and the nozzle.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they
do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless
using custom molded sleeves).
Removing the Earphones
Grasp the body of earphone and gently twist to remove.
Note: Do not pull on cable to remove earphone.
Detachable Cable
You may need to detach the cable from the earphones to attach optional components or to replace the cable if it
becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent
damage to the earphone and connector.
•Do not use pliers or other tools.
•Grasp the connector and the earphone as close as possible to where they join.
• Pull straight apart—do not twist. Cable is a snap fit, not threaded.
Note: If you pull at an angle, the connector will not detach.
•Do not pull on the cable or put any pressure on the earphone nozzle.

Shure Incorporated
3/7
•Listen for a click when connecting.
•When reattaching the cable, match the "L" and "R" markings. For clear cables and earphones, match the color
dots (Red=Right, Blue=Left).
Maintenance and Cleaning
Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product
safety.
•Keep the earphones and sleeves as clean and dry as possible.
•To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a
longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before
reusing.
• Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfec-
tants.
•Do not expose earphones to extreme temperatures.
•Replace sleeves if they do not fit properly.
•Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or
product failure.
Cleaning the Nozzle
If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is
blocked, clear obstructions.
If no obstruction is found or if sound quality does not improve, replace the sleeve with a new sleeve or disassem-
ble the nozzle to clean inside.
Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone
sound filter.

Shure Incorporated
4/7
Interchangeable Nozzle Insert
Three varieties of nozzle insert provide customizable frequency responses for a personalized listening experience.
Use these instructions to replace or clean the nozzle insert.
Nozzle Inserts
Color Sound Signature Response
Blue Balanced Neutral (as shipped)
White Bright +2.5 dB, 1 kHz to 8 kHz
Black Warm −2.5 dB, 1 kHz to 8 kHz
Removing the Nozzle
Note: The nozzle contains small parts. Choose a proper work surface before disassembly.
1. Place the nozzle key (included with earphones) over the nozzle.
2. Turn the key counter-clockwise to loosen and remove the threaded collar.
3. Pull gently on the nozzle with your fingers to remove.
4. Using your fingers only, grasp the end of the nozzle insert and gently slide it out.
Caution: Do not use any tools or your teeth as this could cause damage to the nozzle insert.

Shure Incorporated
5/7
Reassembling the Nozzle
1. Gently slide the insert into the nozzle.
Important: The insert needs to be fully seated. Reposition until it slides in easily. Do not force.
2. Insert the nozzle into the earphone, aligning the dots so it matches the keyed opening.
3. Place the threaded collar over the nozzle. After ensuring the threads are properly engaged, use the nozzle key
to gently turn clockwise.
Caution: There should be no resistance to turning the collar until fully threaded into the housing. Check the fol-
lowing:
◦The insert is fully seated in the nozzle.
◦The nozzle is properly seated in the housing (dots aligned).
4. Once you are certain that the nozzle is properly seated and the collar threaded all the way into the earphone
housing, use the key to tighten the collar just enough to ensure it will not loosen during normal earphone us-
age.

Shure Incorporated
6/7
Airline Adapter
The airline adapter accessory is a dual-mono adapter plug for compatibility with the in-seat entertainment systems
on certain international airlines.
Specifications
Frequency Range
15 Hz –20 kHz
Sensitivity
at 1 kHz
114 dB SPL/mW
Impedance
at 1 kHz
9 Ω
Noise Attenuation
up to37 dB
Included Accessories
•Fit Kit with assorted sleeves
•Zippered carrying case
•64-inch detachable cable

Shure Incorporated
7/7
•Airline adapter
•¼-inch (6.3 mm) adapter
•Cable clip
•Nozzle removal key
•Nozzle inserts for custom frequency response
For optional accessories, visit www.shure.com.
Certifications
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: [phone]
Fax: [phone]
Email: [email protected]