Shure PG27-USB Installation instructions

PG27USB
PG27USB Side Address Condenser Microphone
Product Specifications
www.shure.com ©2008 Shure Incorporated
Overview
Features
Specifications
The PG27USB side-address condenser microphone easily plugs into a computer USB port for the convenience of digital recording. Designed with a
flat frequency response, the PG27USB naturally reproduces a wide variety of acoustic, amplified and vocal sound sources - with professional clarity
and guaranteed “Plug and Play” Shure quality.
USB Plug and Play connectivity allows the convenience of digital recording, anywhere your computer can go.•
Compatible with Windows Vista, XP, 2000, and Mac OS X (10.1 or later)•
Integrated pre-amp with Microphone Gain Control allows control of input signal strength•
Zero Latency Monitoring for real-time playback and multi-tracking without disorientation•
Headphone jack for monitoring with 1/8” connectivity•
Monitor Mix Control for blending microphone and playback audio•
Frequency Response 20 to 20,000 Hz
Polar Pattern Cardioid
Max SPL
(20 Hz to 20 kHz, <1% THD)
PAD OFF: 130 dB SPL
PAD ON: 145 dB SPL
Switch Attenuator: 20 dB
Power Requirements USB-powered, 500 mA maximum
Digital Noise Floor
(20 Hz to 20 kHz, A-weighted)
Minimum MIC GAIN setting: −81 dB
Maximum MIC GAIN setting: −78 dB
Sampling Rate up to 48 kHz
Bit Depth 16 bit
Peak Signal Indicator
(Tri-color)
OFF: −30 dB FS
Green: −30 to −12 dB FS
Yellow: −12 to 0 dB FS
Red: >0 (digital converter clipped)
Sampling Rate up to 48 kHz
Adjustable Gain Range 34 dB
Headphone Output 3.5 mm (1/8 inch)
Polar Pattern
Measured at 1000 Hz Frequency Response
Available Models
PG27USB Includes a 9.8 ft (3m) USB Cable, Stand Adapter and a Zippered Pouch.