Shuttle XPC SD32G2 User manual

XPCUserGuide
Forthe:SD32G2

ShuttleXPCEMITestStatement
ShuttleXPChavebeen through EMItestsaccording tothe following seriesofregulations:
EN55022/CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,
ANSIC63.4(1992),CFR47 Part15 SubpartB,and CNS13438 (1997).The itemstested are
illustrated asfollows:
(A)Voltage:AC100V/60HZ&AC240V/50HZ
(B)Tested ProductInformation:
ProductName:XPC
Status:Sample
ModelName:SD32G2
S/N:N/A
CPU:
Core2 ExtremeX6800 Convoy2.93GFSB 1066 4ML2 Cache B1
SerialPort: one portwith9pins
VGAPort: one portwith15 pins
KeyboardPort: one portwith6pins
MousePort: one portwith6pins
USB 2.0Port: sixportswith6pinsrespectively
1394 Port: one portwith4pinsand one portwith6pinsrespectively
LANPort: one portwith8pins(10Mbps/100Mbps/1000Mbps)
Line-OutPorts:fourports
Front-OutPort: one port
Mic-In&Earphone Ports:one portofeach
Line-InPort: one port
ClearCMOSbutton:one port
DIMM Memory(optional):DDR21GB*2
PowerCable:Detachableand Shielded (withaGNDpin)
Monitor:CRT
MaximumResolution:1600 X1200 V:85Hz
All CPUshavecompletelybeen tested,and valuesoffered bythe worstEMIcombination of
CPUexternalfrequency arelisted asfollows:
TestMode ExternalFrequency CPU CPUOpen/Close
1 133MHzP42.8GHzClose
2 133MHzP42.8GHzOpen
3 266MHzP42.93GHzClose
4 266MHzP42.93GHzOpen

5 266MHzP43.73GHzClose
6 266MHzP43.73GHzOpen
(C)Remedyforthe Tested Product&ItsEMIInterference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(X2)/25MHz(X5)/24.576MHz(X4)
ClockGenerator:U6
(D)Supported HostPeripherals:
ComponentBrand ModelNo./Spec.
HDD Maxtor6H400F0,400GB
CD-ROMShuttleCR40
PowerHiproHP-V200EF3
(E)NoticesforAssembling Computers:
1.AnI/O shielding shouldbe contacted withI/O metallicpartsofamainboard.
2.Cablesshouldappropriatelybe arranged and fixed inacase.Followinstructions:
ØLeaveIDEcablesnotcrossed upon CPUand SDRAM;
ØLeavepowercablesminimuminlength,and notcrossed upon amainboard;
ØLeaveCPUfan cablesminimuminlength,and notnearCPU;
ØLeavecableson panelsand othersparecablestied inacomputercase.
3.Makesurean EMIshielding attached toacasehasbeen properlyinstalled.
4.Makesurea5.25"driveand screwsarefastened tothe case(EMIshielding).
5.Makesurethe caseisincontactwithEMIconnection points.
6.Makesurethereisno cleft inthe case.
7.MakesureaPCIdoorisbound toacase.
8.Makesurecablesofotherdevices(fansorsomeothers)arefixed inacase.

Shuttle®
XPCInstallation Guide
Copyright
Copyright©2006 byShuttle®Inc.All RightsReserved.
Nopartofthispublication maybereproduced,transcribed,storedinaretrievalsystem,
translatedintoanylanguage,ortransmittedinanyform orbyanymeans,electronic,
mechanical, magnetic,optical, chemical, photocopying,manual, orotherwise,withoutprior
writtenpermission fromShuttle®Inc.
Disclaimer
Shuttle®Inc.shall notbeliableforanyincidentalorconsequentialdamagesresultingfrom
theperformanceoruseofthisproduct.
Thiscompanymakesno representationsorwarrantiesregardingthecontentsofthisma-
nual. Information inthismanualhasbeencarefullycheckedforreliability;however,no
guarantee isgivenastothecorrectness ofthecontents.Intheinterestofcontinuedproduct
improvement, thiscompanyreservestherighttorevisethemanualorincludechangesin
thespecificationsoftheproductdescribedwithinit atanytimewithoutnoticeand without
obligation tonotifyanyperson ofsuchrevision orchanges.Theinformation containedin
thismanualisprovidedforgeneralusebycustomers.
ThisdevicecomplieswithPart15 oftheFCC Rules,Operation issubjecttothefollowing
twoconditions:
1.Thisdevicemaynotcauseharmfulinterference.
2.Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
Trademarks
ShuttleisaregisteredtrademarkofShuttleInc.
Inteland PentiumareregisteredtrademarksofIntelCorporation.
PS/2isaregisteredtrademarkofIBMCorporation.
AWARDisaregisteredtrademarkofAwardSoftwareInc.
Microsoft and WindowsareregisteredtrademarksofMicrosoft Corporation.
GeneralNotice
Otherbrand and productnamesusedhereinareforidentification purposesonlyand may
betrademarksoftheirrespective owners.

InstallationNotices
Donotplace thisdevice underneath
heavy loadsorinanunstableposition.
Donotexpose thisdevice tohigh
levelsofdirectsunlight,high-humidity
orwetconditions.
Donotuse orexpose thisdevice
around magneticfieldsas magnetic
interference may affectthe
performance ofthedevice.
Donotblock theairventstothis
device orimpedetheairflowin
anyway.
CAUTION
Incorrectlyreplacing the batterymaydamage thiscomputer.Replaceonlywith
thesameorequivalentasrecommended byShuttle.Disposeofused batteries
accordingtothe manufacturer'sinstructions.
SafetyInformation
Read the followingprecautionsbeforesetting up aShuttleXPC.

TABLEOFCONTENTS
1Driverand SoftwareInstallation........................................................................... 1
1.1MainboardDriverCD ..................................................................................... 1
1.1.1Install MainboardSoftware..................................................................... 2
Appendix.................................................................................................................. 3
EntertheBIOS..................................................................................................... 3
THEMAINMENU ................................................................................................. 4
StandardCMOSFeatures.............................................................................. 6
AdvancedBIOSFeatures............................................................................... 9
Advanced ChipsetFeatures......................................................................... 14
IntegratedPeripherals.................................................................................. 17
PowerManagementSetup ........................................................................... 22
PnP/PCIConfigurations............................................................................... 26
PCHealthStatus.......................................................................................... 28
Frequency/VoltageControl........................................................................... 29
Load Fail-SafeDefaults................................................................................ 30
Load OptimizedDefaults.............................................................................. 30
SetSupervisor/UserPassword..................................................................... 31
Save&ExitSetup ........................................................................................ 32
ExitWithoutSaving ...................................................................................... 32

1
English
<1.1MainboardDriverCD
TheMainboardDriverCDcontainsall themotherboarddrivernecessarytooptimize
theperformanceofthisXPCinaWindows(R)OS.Install thesedriversafterinstalling
Microsoft(R)Windows(R).
Navigation BarDescription :
FInstall MainboardSoftware-Install IntelChipsetDriver,IntelVGADriver,
IntelMatrixStorage Driver,Marvell GigaLANDriver,IntelHighDefinition
AudioDriver,DirectX9Utility.
FManual-SD32G2manualinPDFformat.
FInstall Utility-Install AcrobatReader,WinFlashUtility.
FLinktoShuttleHomepage -Linktoshuttlewebsitehomepage.
FBrowsethisCD -Allowsyou tosee contentsofthisCD.
FQuit-ClosethisCD.
Note:TheCD contentsattachedinSD32G2mainboardaresubjectto
change withoutnotice.
1Driverand SoftwareInstallation

2
English
<1.1.1Install MainboardSoftware
InserttheattachedCDintoyourCD-ROMdrive.TheCDAutoRun screenshould
appear.If theAutoRun screendoesnotappear,doubleclickon Autorun icon inMy
Computertobringup ShuttleMainb-oardSoftwareSetup screen.
Clickthe“Install Main-boardSoftware“bar.Individuallyinstall thefollowingdrivers.
FInstall IntelChipsetDriver
FInstall IntelVGA Driver
FInstall IntelMatrixStorage Driver
FInstall Marvell Giga LAN Driver
FInstall IntelHighDefinition AudioDriver
FInstall DirectX9Utility

3
English
BIOSSettings
TheSD32G2BIOSROMhasabuilt-inSetup programthatallowsuserstomodify
basicsystemconfiguration.Thisinformation isstoredinbattery-backedRAMsothatit
retainsSetup information evenif thesystempoweristurnedoff.
ThesystemBIOSmanagesand executesavarietyofhardwarerelatedfunctions
including:
Systemdateand time
Hardwareexecution sequence
Powermanagementfunctions
Allocation ofsystemresources
EntertheBIOS
To entertheBIOS(BasicInput/OutputSystem)utility,followthesesteps:
Step1.Poweron thecomputer.Thesystemwill perform itsPOST(Power-On
Self Test) routinechecks.
Step2.Press the<Del>key immediately,oratthefollowingmessage:
Press DEL toenterSETUP,orsimultaneouslypress <Ctrl>,<Alt>,
<Esc>keys
Note1.If you miss trainsofwordsmentionedinstep2 (themessage disap-
pears beforeyou canrespond)and you still wishtoenterBIOSSetup,
restartthesystemand tryagainbyturningthecomputerOFF and
ONagainorbypressingthe<RESET>switchlocatedatthe
computer’sfront-panel. You may alsorebootbysimultaneously
pressingthe<Ctrl>,<Alt>, <Del> keyssimultaneously.
Note2.If you do notpress thekeysintimeand systemdoesnotboot,the
screenwill promptanerrormessage,and you will begiventhe
followingoptions:
"Press F1toContinue,DEL toEnterSetup”
Step3.Whenyou entertheBIOSprogram,theCMOSSetup Utilitywill displaythe
MainMenu,asshowninthenextsection.
Appendix

4
English
TheMainMenu
Onceyou entertheAwardBIOS(tm)CMOSSetup Utility,theMainMenu
will appearon thescreen.TheMainMenu allowsyou toselectfromsev-
eralsetup functionsand twoexit choices.Usethearrowkeystoselect
amongtheitemsand press <Enter>toacceptand enterthesub-menu.
Notethatabriefdescription ofeachhighlightedselection appearsatthe
bottomofthescreen.
Setup Items
Themainmenu includesthefollowingmainsetup categories.Recall that
somesystemsmaynotincludeall entries.
StandardCMOSFeatures
Usethismenu forbasicsystemconfiguration.
AdvancedBIOSFeatures
Usethismenu tosettheAdvancedFeaturesavailableon yoursystem.
AdvancedChipsetFeatures
Usethismenu tochange thevaluesinthechipsetregistersand optimize
yoursystem'sperformance.
IntegratedPeripherals
Usethismenu tospecifyyoursettingsforintegratedperipherals.
PowerManagementSetup
Usethismenu tospecifyyourpowermanagementsettings.
PnP/PCIConfigurations
Thisentryappearsif yoursystemsupportsPnP /PCI.