Shuttle XPC User manual

XPCUserGuide
Forthe:SS21T

ShuttleXPCEMITestStatement
ShuttleXPChavebeen viathe EMItestintermsofseriesofregulations:EN55022/CISPR22/
AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSIC63.4(1992),
CFR47 Part15 SubpartB,and CNS13438 (1997).The itemstested areillustrated asfollows:
(A)Voltage:AC110V/60HZ&AC230V/50HZ
(B)Tested ProductInformation:
ProductName:XPC
Status:Sample
ModelName:SS21T
S/N:N/A
CPU:
ExternalFrequency:200 MHz
AMDAthlon 64X25000+Processor
SerialPort: one portwith9pins
VGAPort: one portwith15 pins
KeyboardPort: one portwith6pins
MousePort: one portwith6pins
USB 2.0Port: sixportswith4pinsrespectively
1394 Port: one portwith4pinsand one portwith6pinsrespectively
LANPort: one portwith8pins(10Mbps/100Mbps)
Mic-InPorts:twoport
Line-InPorts:one ports
Line-OutPort: one ports
EarPhone:one port
DIMMMemory(optional):DDRII 533/667 1GBx2
PowerCable:Detachableand Shielded (withaGND pin)
Monitor:CRT
MaximumResolution:2048 x1536 V:75Hz
All CPUshavecompletelybeen tested,and valuesoffered bythe worstEMIcombination of
CPUexternalfrequency arelisted asfollows:
TestMode ExternalFrequency CPU CPUOpen/Close
1200MHzAMDAthlon64X25000+Close
2200MHzAMDAthlon64X25000+Open

(C)Remedyforthe Tested Product&ItsEMIInterference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(Y2)/25MHz(Y3)/32.768KHz(Y1)/24.576MHz(X1,X2).
ClockGenerator:CLK1
(D)Supported HostPeripherals:
HostPeripheralProductNameModelName
#1CaseSS21T
#2PowerSupplyFSP250W
#3SerialATASeagateST312G026A8
#4DVDPlayerPC40
(E)NoticesforAssembling Computers:
1.Casesshouldbe made ofiron orothermetalthathasgood electricconductivity.
2.Cylindersinacaseshouldbe made ofmetal,and ashaving amainboardmounted
inacase,makesurescrewsareall utilized and fastened on amainboard.
3.AnI/Oshielding shouldbe contacted withI/Ometallicpartsofamainboard.
4.Cablesshouldappropriatelybe arranged and fixed inacase.Followinstructions:
Ø LeaveIDEcablesnotcrossed upon CPUand SDRAM;
Ø Leavepowercablesminimuminlength,and notcrossed upon amainboard;
Ø LeaveCPUfan cablesminimuminlength,and notnearCPU;
Ø Leavecableson panelsand othersparecablestied inacomputercase.
5.Makesurean EMIshielding attached toacasehasproperlybeen installed.
6.Makesurea5.25"and screwsarefastenedtoan EMIshielding.
7.MakesureacaseiscloselyincontactwithEMIconnected points.
8.Makesurethereisno cleft inacasewhichisnotdeformed.
9.MakesureaPCIdoorisbound toacase.
10.Makesurecablesofotherdevices(fansorsomeothers)arefixed inacase.

Shuttle®
XPCInstallation Guide
Copyright
Copyright©2006 byShuttle®Inc.All RightsReserved.
Nopartofthispublication maybereproduced,transcribed,storedinaretrievalsystem,
translatedintoanylanguage,ortransmittedinanyformorbyanymeans,electronic,
mechanical, magnetic,optical, chemical, photocopying,manual, orotherwise,withoutprior
writtenpermission fromShuttle®Inc.
Disclaimer
Shuttle®Inc.shall notbeliableforanyincidentalorconsequentialdamagesresultingfrom
theperformanceoruseofthisproduct.
Thiscompanymakesno representationsorwarrantiesregardingthecontentsofthisma-
nual. Information inthismanualhasbeencarefullycheckedforreliability;however,no
guarantee isgivenastothecorrectness ofthecontents.Intheinterestofcontinuedproduct
improvement, thiscompanyreservestherighttorevisethemanualorincludechangesin
thespecificationsoftheproductdescribedwithinit atanytimewithoutnoticeand without
obligation tonotifyanyperson ofsuchrevision orchanges.Theinformation containedin
thismanualisprovidedforgeneralusebycustomers.
ThisdevicecomplieswithPart15 oftheFCC Rules,Operation issubjecttothefollowing
twoconditions:
1.Thisdevicemaynotcauseharmfulinterference.
2.Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
Trademarks
ShuttleisaregisteredtrademarkofShuttleInc.
Inteland PentiumareregisteredtrademarksofIntelCorporation.
PS/2isaregisteredtrademarkofIBMCorporation.
AWARDisaregisteredtrademarkofAwardSoftwareInc.
Microsoft and WindowsareregisteredtrademarksofMicrosoft Corporation.
GeneralNotice
Otherbrand and productnamesusedhereinareforidentification purposesonlyand may
betrademarksoftheirrespective owners.

Installation Notices
Donotplace thisdevice underneath
heavy loadsorinanunstableposition.
Donotexpose thisdevice tohigh
levelsofdirectsunlight,high-humidity
orwetconditions.
Donotuse orexpose thisdevice
around magneticfieldsas magnetic
interference may affectthe
performance ofthedevice.
Donotblock theairventstothis
device orimpedetheairflowin
anyway.
CAUTION
Incorrectlyreplacingthebatterymaydamage thiscomputer.Replaceonlywith
the sameorequivalentasrecommendedbyShuttle.Disposeofusedbatteries
accordingtothemanufacturer'sinstructions.
SafetyInformation
ReadthefollowingprecautionsbeforesettingupaShuttleXPC.

TABLEOFCONTENTS
1Driverand SoftwareInstallation........................................................................... 1
1.1MainboardDriverCD..................................................................................... 1
1.1.1InstallMainboardSoftware..................................................................... 2
Appendix.................................................................................................................. 3
EntertheBIOS..................................................................................................... 3
THEMAINMENU ................................................................................................. 4
StandardCMOSFeatures.............................................................................. 6
AdvancedBIOSFeatures............................................................................... 9
AdvancedChipsetFeatures......................................................................... 12
IntegratedPeripherals.................................................................................. 15
PowerManagementSetup ........................................................................... 18
PnP/PCIConfigurations............................................................................... 22
PCHealthStatus.......................................................................................... 24
FrequencyControl........................................................................................ 25
LoadFail-SafeDefaults................................................................................ 26
LoadOptimizedDefaults.............................................................................. 26
SetSupervisor/UserPassword..................................................................... 26
Save&ExitSetup ........................................................................................ 27
ExitWithoutSaving ...................................................................................... 27

1
English
<1.1MainboardDriverCD
TheMainboardDriverCDcontainsall themotherboarddrivernecessarytooptimize
theperformanceofthisXPCinaWindows(R)OS.Install thesedriversafterinstalling
Microsoft(R)Windows(R).
Navigation BarDescription :
FInstall MainboardSoftware-SiSVGADriver,SiSRAIDDriver,
SiSLANDriver,Realtek AudioDriver,SiSUSB2.0Driver,DirectX9Utility.
FInstall Utility-Install AcrobatReader,WinFlashUtility.
FManual-SS21T user'sguideand RAIDmanualinPDFformat.
FLinktoShuttleHomepage -Linktoshuttlewebsitehomepage.
FBrowsethisCD-Allowsyou tosee contentsofthisCD.
FQuit -ClosethisCD.
Note:TheCDcontentsattachedinSS21T mainboardaresubjecttochange
withoutnotice.
1Driverand SoftwareInstallation

2
English
<1.1.1Install MainboardSoftware
InserttheattachedCDintoyourCD-ROMdrive.TheCDAutoRun screenshould
appear.If theAutoRun screendoesnotappear,doubleclickon Autorun icon inMy
Computertobringup ShuttleMain-boardSoftwareSetup screen.
Clickthe“Install Main-boardSoftware“bar.Individuallyinstall thefollowingdrivers.
F Install SiSVGADriver
F Install SiSRAIDDriver
F Install SiSLANDriver
F Install Realtek AudioDriver
F Install SiSUSB2.0Driver
F Install DirectX9Utility

3
English
BIOSSettings
TheSS21T BIOSROMhasabuilt-inSetup programthatallowsuserstomodifybasic
systemconfiguration.Thisinformation isstoredinbattery-backedRAMsothatit re-
tainsSetup information evenif thesystempoweristurnedoff.
ThesystemBIOSmanagesand executesavarietyofhardwarerelatedfunctions
including:
Systemdateand time
Hardwareexecution sequence
Powermanagementfunctions
Allocation ofsystemresources
EntertheBIOS
To entertheBIOS(BasicInput/OutputSystem)utility,followthesesteps:
Step1.Poweron thecomputer.Thesystemwill performitsPOST(Power-On
Self Test) routinechecks.
Step2.Press the<Del>key immediately,oratthefollowingmessage:
Press DEL toenterSETUP,orsimultaneouslypress <Ctrl>,<Alt>,
<Esc>keys
Note1. If you miss thetrainofwordsmentionedinstep2 (themessage disap-
pearsbeforeyoucanrespond)andyou still wishtoenterBIOSSetup,
restartthesystemand tryagainbyturningthecomputerOFF and
ONagainorbypressingthe<RESET>switchlocatedatthe
computer’sfront-panel. You mayalsorebootbysimultaneously
pressingthe<Ctrl>,<Alt>,<Del>keyssimultaneously.
Note2. If you do notpress thekeysintimeand systemdoesnotboot, the
screenwill promptanerrormessage,and you will begiventhe
followingoptions:
"Press F1toContinue,DEL toEnterSetup”
Step3.Whenyou entertheBIOSprogram,theCMOSSetup Utilitywill displaythe
MainMenu,asshowninthenextsection.
Appendix

4
English
TheMainMenu
Onceyou entertheAwardBIOS(tm)CMOSSetup Utility,theMainMenu will
appearon thescreen.TheMainMenu allowsyou toselectfromseveralsetup
functionsand twoexit choices.Usethearrowkeystoselectamongtheitems
and press <Enter>toacceptand enterthesub-menu.
Notethatabriefdescription ofeachhighlightedselection appearsatthe
bottomofthescreen.
Setup Items
Themainmenu includesthefollowingmainsetup categories.Recall that
somesystemsmaynotincludeall entries.
StandardCMOSFeatures
Usethismenu forbasicsystemconfiguration.
AdvancedBIOSFeatures
Usethismenu tosettheAdvancedFeaturesavailableon yoursystem.
AdvancedChipsetFeatures
Usethismenu tochange thevaluesinthechipsetregistersand optimize
yoursystem'sperformance.
IntegratedPeripherals
Usethismenu tospecifyyoursettingsforintegratedperipherals.