Siemens Fdm223 User manual

FDM223, FDM224, FDM223H, FDM224H

Manual call point

Technical Manual

007002_k_en_-- Smart Infrastructure

2019-10-16

Imprint

Technical specifications and availability subject to change without notice.

Transmittal, reproduction, dissemination and/or editing of this document as well as

utilization of its contents and communication thereof to others without express

authorization are prohibited. Offenders will be held liable for payment of damages.

All rights created by patent grant or registration of a utility model or design patent

are reserved.

Issued by:

Siemens Switzerland Ltd.

Smart Infrastructure

Global Headquarters

Theilerstrasse 1a

CH-6300 Zug

Tel. +41 58 724-2424

www.siemens.com/buildingtechnologies

Edition: 2019-10-16

Document ID: 007002_k_en_--

Imprint

2 | 54 007002_k_en_--

007002_k_en_-- 3 | 54

Table of contents

1 About this document................................................................................. 5

1.1 Applicable documents .............................................................................. 7

1.2 Download center....................................................................................... 7

1.3 Technical terms ........................................................................................ 7

1.4 History of changes.................................................................................... 8

2 Safety ....................................................................................................... 9

2.1 Safety instructions .................................................................................... 9

2.2 Safety regulations for the method of operation......................................... 10

2.3 Standards and directives complied with ................................................... 12

2.4 Release Notes .......................................................................................... 12

3 Structure and function .............................................................................. 13

3.1 Overview................................................................................................... 13

3.1.1 Details for ordering ..................................................................... 14

3.1.2 Product versionES ..................................................................... 15

3.2 Setup ........................................................................................................ 16

3.2.1 Manual call points FDM223H and FDM224H ............................. 16

3.2.2 Manual call points FDM223H and FDM224H ............................. 17

3.2.3 Connections ................................................................................ 18

3.2.4 Indication elements..................................................................... 18

3.3 Function.................................................................................................... 19

3.3.1 Danger levels .............................................................................. 19

3.3.2 Internal alarm indicator ............................................................... 19

3.3.3 Line separator............................................................................. 19

3.3.4 Test mode ................................................................................... 19

3.3.5 Interface to service devices ........................................................ 20

3.3.6 Diagnosis levels .......................................................................... 20

3.3.7 Behavior in degraded mode........................................................ 21

3.3.8 Line tester ................................................................................... 21

3.4 Accessories .............................................................................................. 22

3.4.1 Housing for manual call point FDMH293-x ................................. 22

3.4.2 Housing for manual call point FDMH297-R ................................ 22

3.4.3 Housing for manual call point FDMH292-R ................................ 22

3.4.4 KeyDMZ1195 ............................................................................. 23

3.4.5 Glass insert DMZ1196-AC .......................................................... 23

3.4.6 Protective cover DMZ1197-AC ................................................... 23

3.4.7 Seal DMZ1197-AD...................................................................... 24

3.4.8 Seal FDMP223 ........................................................................... 24

3.4.9 Auxiliary terminal ........................................................................ 24

3.4.10 Cable gripper(2-hole)................................................................. 24

3.4.11 M20x1.5 metal cable gland....................................................... 25

4 Planning.................................................................................................... 26

4.1 Compatibility FDnet/C-NET ...................................................................... 26

4.2 Fields of application.................................................................................. 26

4.3 Mounting site ............................................................................................ 26

4.4 Environmental influences ......................................................................... 26

5 Mounting/Installation............................................................................... 27

5.1 Preparation ............................................................................................... 27

4 | 54 007002_k_en_--

5.2 Installation ................................................................................................ 29

5.3 Installation ................................................................................................ 31

5.3.1 Mounting the seal FDMP223 ...................................................... 34

5.4 Installing the protective cover ................................................................... 35

5.5 Installing the stickers ................................................................................ 36

5.6 Attaching the window sign ........................................................................ 37

6 Commissioning ......................................................................................... 38

6.1 Localization and device testing................................................................. 38

6.2 Checking function ..................................................................................... 39

7 Maintenance/Repair ............................................................................... 43

7.1 Resetting after an alarm ........................................................................... 43

7.2 Status query ............................................................................................. 44

7.3 Performance check................................................................................... 44

7.4 Replacing the glass insert ........................................................................ 45

8 Specifications ........................................................................................... 47

8.1 Technical data .......................................................................................... 47

8.2 Dimensions............................................................................................... 49

8.3 Master gauges for holes ........................................................................... 50

8.4 Environmental compatibility and disposal................................................. 51

Index................................................................................................................... 52

1 About this document

Goal and purpose

This document contains all information on the manual call points

● FDM223

● FDM224

● FDM223H

● FDM224H

Following the instructions consistently will ensure that the product can be used

safely and without any problems.

Intended use

The manual call points FDM223, FDM224, FDM223H, and FDM224H can only be

used for the manual activation of fire alarms in a fire detection system FS20 or

FS720.

Target groups

The information in this document is intended for the following target groups:

Target group Activity Qualification

Product Manager ● Is responsible for information

passing between the manufacturer

and regional company.

● Coordinates the flow of information

between the individual groups of

people involved in a project.

● Has obtained suitable specialist

training for the function and for the

products.

● Has attended the training courses

for Product Managers.

Project Manager ● Coordinates the deployment of all

persons and resources involved in

the project according to schedule.

● Provides the information required to

run the project.

● Has obtained suitable specialist

training for the function and for the

products.

● Has attended the training courses

for Project Managers.

Project engineer ● Sets parameters for product

depending on specific national and/

or customer requirements.

● Checks operability and approves

the product for commissioning at

the place of installation.

● Is responsible for troubleshooting.

● Has obtained suitable specialist

training for the function and for the

products.

● Has attended the training courses

for Product Engineer.

Installation personnel ● Assembles and installs the product

components at the place of

installation.

● Carries out a function check

following installation.

● Has received specialist training in

the area of building installation

technology or electrical installations.

Maintenance personnel ● Carries out all maintenance work.

● Checks that the products are in

perfect working order.

● Searches for and corrects

malfunctions.

● Has obtained suitable specialist

training for the function and for the

products.

Document identification

The document ID is structured as follows:

About this document 1

007002_k_en_-- 5 | 54

ID code Examples

ID_ModificationIndex_Language_COUNTRY

-- = multilingual or international

A6V10215123_a_de_DE

A6V10215123_a_en_--

A6V10315123_a_--_--

Date format

The date format in the document corresponds to the recommendation of

international standard ISO8601 (format YYYY-MM-DD).

Conventions for text marking

Markups

Special markups are shown in this document as follows:

⊳ Requirement for a behavior instruction

1.

Behavior instruction with at least two operation sequences

– Version, option, or detailed information for a behavior instruction

⇨ Intermediate result of a behavior instruction

⇨ End result of a behavior instruction

● Numbered lists and behavior instructions with an operation

sequence

[➙ X] Reference to a page number

'Text' Quotation, reproduced identically

<Key> Identification of keys

> Relation sign and for identification between steps in a sequence,

e.g., 'Menu bar' > 'Help' > 'Help topics'

↑Text Identification of a glossary entry

Supplementary information and tips

The 'i' symbol identifies supplementary information and tips for an easier way of

working.

About this document

6 | 54 007002_k_en_--

1.1 Applicable documents

Document ID Title

007001 Data sheet Manual call points FDM221, FDM223, FDM224

007227 Technical manual Detector exchanger and tester FDUD292

007905 Installation Housing for manual call point FDMH293-x, FDMH297-R, Switching unit

FDME223, FDME224

008250 Technical Manual Line tester FDUL221

008331 List of compatibility (for 'Sinteso™' product line)

008345 Data sheet Manual call points 'Heavy Duty' FDM223H, FDM224H

008615 Installation Housing for manual call point 'Heavy Duty' FDMH292-R

009052 FS20 Fire detection system - Commissioning, Maintenance, Troubleshooting

009718 Technical Manual Intelligent detector tester FDUD293

A6V10210416 FS720 Fire detection system - Commissioning, Maintenance, Troubleshooting

A6V10229261 List of compatibility (for 'Cerberus™ PRO' product line)

1.2 Download center

You can download various types of documents, such as data sheets, installation

instructions, and license texts via the following Internet address:

https://siemens.com/bt/download

lEnter the document ID in the search field.

You will also find information about search variants and links to mobile

applications (apps) for various systems on the home page.

1.3 Technical terms

Term Explanation

FDnet/C-NET Addressed detector line

LED Light-emitting diode

MC link Maintenance and commissioning link (proximity

interface)

About this document

Applicable documents 1

007002_k_en_-- 7 | 54

1.4 History of changes

The reference document's version applies to all languages into which the reference

document is translated.

The first edition of a language version or a country variant may, for example, be

version 'd' instead of 'a' if the reference document is already this version.

The table below shows this document's revision history:

Version Edition date Brief description

k 2019-10-16 ● Information about seal FDMP223 added in the 'Accessories', 'Installation', and

'Technical data' chapters

● 'Accessory' chapter: Cable gripper (1-hole) replaced by cable gripper (2-hole)

j 2018-02-01 ● Changes in the 'Technical data' chapter

i 2016-02-23 ● Changes in the 'Technical data' chapter

h 2015-09-02 ● New door used for all manual call points

● 'Replacing the glass insert' chapter revised

● 2-hole cable grippers removed from accessories available to purchase

● Intended use added

● Editorial changes

g 2014-05-05 V-pins removed from text and accessories

Mounting height changed from 1.3…1.6m to 0.9…1.6m

Data sheet updated in 'Applicable documents' chapter

FDM221 removed from the document and included in document 009757.

Housing FDMH297-R added.

Accessories and spare parts added and restructured.

Document edited.

Change to date format in line with ISO 8601specifications (yyyy-mm-ddformat).

f 11.2007 FDM223H and FDM224H in text and added with graphics

FDMH292/3-x IP64->IP65

e 09.2007 Standards added

Diagnosis levels adapted

d 07.2007 Technical terms added.

Supplements in the Technical data:

- Line separator

- IP protection categories

- Standard EN54-17

- VdS and LPCB approvals added

c 09.2006 FDM224 included

Diagnosis levels added

b 01.2005 Name of division

a 01.2004 First edition

About this document

History of changes

8 | 54 007002_k_en_--

2 Safety

2.1 Safety instructions

The safety notices must be observed in order to protect people and property.

The safety notices in this document contain the following elements:

● Symbol for danger

● Signal word

● Nature and origin of the danger

● Consequences if the danger occurs

● Measures or prohibitions for danger avoidance

Symbol for danger

This is the symbol for danger. It warns of risks of injury.

Follow all measures identified by this symbol to avoid injury or death.

Additional danger symbols

These symbols indicate general dangers, the type of danger or possible

consequences, measures and prohibitions, examples of which are shown in the

following table:

General danger Explosive atmosphere

Voltage/electric shock Laser light

Battery Heat

Signal word

The signal word classifies the danger as defined in the following table:

Signal word Danger level

DANGER 'DANGER' identifies a dangerous situation, which will result directly in death or

serious injury if you do not avoid this situation.

WARNING 'WARNING' identifies a dangerous situation, which may result in death or serious

injury if you do not avoid this situation.

CAUTION 'CAUTION' identifies a dangerous situation, which could result in slight to

moderately serious injury if you do not avoid this situation.

NOTICE

' identifies a possibly harmful situation or possible damage to property

that may result from non-observance.

NOTICE

' does not relate to possible bodily injury.

Safety

Safety instructions 2

007002_k_en_-- 9 | 54

How risk of injury is presented

Information about the risk of injury is shown as follows:

WARNING

Nature and origin of the danger

Consequences if the danger occurs

● Measures / prohibitions for danger avoidance

How possible damage to property is presented

Information about possible damage to property is shown as follows:

NOTICE

Nature and origin of the danger

Consequences if the danger occurs

● Measures / prohibitions for danger avoidance

2.2 Safety regulations for the method of operation

National standards, regulations and legislation

Siemens products are developed and produced in compliance with the relevant

European and international safety standards. Should additional national or local

safety standards or legislation concerning the planning, mounting, installation,

operation or disposal of the product apply at the place of operation, then these

must also be taken into account together with the safety regulations in the product

documentation.

Electrical installations

WARNING

Electrical voltage

Electric shock

● Work on electrical installations may only be carried out by qualified

electricians or by instructed persons working under the guidance and

supervision of a qualified electrician, in accordance with the electrotechnical

regulations.

● Wherever possible disconnect products from the power supply when carrying

out commissioning, maintenance or repair work on them.

● Lock volt-free areas to prevent them being switched back on again by mistake.

● Label the connection terminals with external voltage using a

'DANGERExternal voltage' sign.

● Route mains connections to products separately and fuse them with their own,

clearly marked fuse.

● Fit an easily accessible disconnecting device in accordance with IEC60950‑1

outside the installation.

● Produce earthing as stated in local safety regulations.

Safety

Safety regulations for the method of operation

10 | 54 007002_k_en_--

CAUTION

Noncompliance with the following safety regulations

Risk of injury to persons and damage to property

● Compliance with the following regulations is required.

● Specialist electrical engineering knowledge is required for installation.

● Only an expert is permitted to carry out installation work.

Incorrect installation can take safety devices out of operation unbeknown to a

layperson.

Mounting, installation, commissioning and maintenance

● If you require tools such as a ladder, these must be safe and must be intended

for the work in hand.

● When starting the fire control panel ensure that unstable conditions cannot

arise.

● Ensure that all points listed in the 'Testing the product operability' section below

are observed.

● You may only set controls to normal function when the product operability has

been completely tested and the system has been handed over to the customer.

Testing the product operability

● Prevent the remote transmission from triggering erroneously.

● If testing building installations or activating devices from third-party companies,

you must collaborate with the people appointed.

● The activation of fire control installations for test purposes must not cause

injury to anyone or damage to the building installations. The following

instructions must be observed:

– Use the correct potential for activation; this is generally the potential of the

building installation.

– Only check controls up to the interface (relay with blocking option).

– Make sure that only the controls to be tested are activated.

● Inform people before testing the alarm devices and allow for possible panic

responses.

● Inform people about any noise or mist which may be produced.

● Before testing the remote transmission, inform the corresponding alarm and

fault signal receiving stations.

Modifications to the system design and the products

Modifications to the system and to individual products may lead to faults,

malfunctioning and safety risks. Written confirmation must be obtained from

Siemens and the corresponding safety bodies for modifications or additions.

Modules and spare parts

● Components and spare parts must comply with the technical specifications

defined by Siemens. Only use products specified or recommended by

Siemens.

● Only use fuses with the specified fuse characteristics.

● Wrong battery types and improper battery changing lead to a risk of explosion.

Only use the same battery type or an equivalent battery type recommended by

Siemens.

● Batteries must be disposed of in an environmentally friendly manner. Observe

national guidelines and regulations.

Safety

Safety regulations for the method of operation 2

007002_k_en_-- 11 | 54

Disregard of the safety regulations

Before they are delivered, Siemens products are tested to ensure they function

correctly when used properly. Siemens disclaims all liability for damage or injuries

caused by the incorrect application of the instructions or the disregard of danger

warnings contained in the documentation. This applies in particular to the following

damage:

● Personal injuries or damage to property caused by improper use and incorrect

application

● Personal injuries or damage to property caused by disregarding safety

instructions in the documentation or on the product

● Personal injury or damage to property caused by poor maintenance or lack of

maintenance

2.3 Standards and directives complied with

A list of the standards and directives complied with is available from your Siemens

contact.

2.4 Release Notes

Limitations to the configuration or use of devices in a fire detection installation with

a particular firmware version are possible.

WARNING

Limited or non-existent fire detection

Personal injury and damage to property in the event of a fire.

● Read the 'Release Notes' before you plan and/or configure a fire detection

installation.

● Read the 'Release Notes' before you carry out a firmware update to a fire

detection installation.

NOTICE

Incorrect planning and/or configuration

Important standards and specifications are not satisfied.

Fire detection installation is not accepted for commissioning.

Additional expense resulting from necessary new planning and/or configuration.

● Read the 'Release Notes' before you plan and/or configure a fire detection

installation.

● Read the 'Release Notes' before you carry out a firmware update to a fire

detection installation.

Safety

Standards and directives complied with

12 | 54 007002_k_en_--

3 Structure and function

3.1 Overview

The manual call points are intended for use in places where a fire can be detected

by people who can manually trigger an alarm.

The manual call points consist of a housing and a switching unit. They have the

following features:

● Manual call points FDM223 and FDM223H with indirect activation [➙16]

● Manual call points FDM224 and FDM224H with direct activation [➙17]

● Two-wire installation for all cable types

● Individual detector addressing

● Indication of the condition (Alarm, localization or test) by means of a

dichromatic LED

● Integrated line separation function

● Communication via FDnet/C-NET

● Manual call points FDM223H and FDM224H:

– Very robust housing design made from fiberglass-reinforced thermoplast

– For surface mounting in humid, wet and dusty environments

● Housing FDMH297-R:

– Housing optimized for the migration of old manual call points in wall

hydrants, for example. Height and width of housing same as old

SIGMASYS manual call points.

– Not suitable for use in wet areas.

Manual call points in housing FDMH293-x or FDMH297-R

Manual call point FDM223 Manual call point FDM224

Manual call point in housing FDMH292-R

Manual call point FDM223H Manual call point FDM224H

See also

2Manual call points FDM223H and FDM224H [➙ 16]

2Manual call points FDM223H and FDM224H [➙ 17]

Structure and function

Overview 3

007002_k_en_-- 13 | 54

3.1.1 Details for ordering

Design and component combinations:

Manual call point Type Order no. Designation

Scope of delivery

FDM223 FDM224 FDM223H FDM224H

Complete device

x - - - FDM223

(complete)

A5Q00008098 Red housing (FDMH293-R) with glass insert,

key, switching unit (FDME223), 2cable grippers

(2-hole), and 'Fire brigade' and 'Fire detector'

window signs

Switching units

x - x - FDME223 A5Q00003087 Switching unit

for indirect activation

- x - x FDME224 A5Q00009392 Switching unit

for direct activation

Housing

x x - - FDMH293-R A5Q00004023 Red housing