Siemens FS720 Series Guide

FS720
Fire detection system
Mounting
Installation
IP6
A6V10210390_j_en_--
Building Technologies
2015-12-15 Control Products and Systems

Legal notice
2 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
Legal notice
Technical specifications and availability subject to change without notice.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages.
All rights created by patent grant or registration of a utility model or design patent
are reserved.
Issued by:
Siemens Switzerland Ltd.
Building Technologies Division
International Headquarters
Gubelstrasse 22
CH-6301 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
Edition: 2015-12-15
Document ID: A6V10210390_j_en_--
© Siemens Switzerland Ltd, 2008

3 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
Table of contents
1About this document .............................................................................7
1.1 Applicable documents................................................................................. 8
1.2 Download center......................................................................................... 9
1.3 Revision history .......................................................................................... 9
2Safety ............................................................................................... 11
2.1 Safety instructions .....................................................................................11
2.2 Safety regulations for the method of operation ...........................................13
2.3 Standards and directives complied with......................................................15
2.4 Release Notes...........................................................................................15
3Overview........................................................................................... 16
3.1 Packaging units .........................................................................................16
3.2 Station rear panels (packaging unit)...........................................................16
3.2.1 Rear panel in Eco housing ..........................................................17
3.2.2 Rear panel in Standard housing ..................................................18
3.2.3 Rear panel in Comfort housing....................................................19
3.2.4 Rear panel in Large housing .......................................................20
3.2.5 Mounting material .......................................................................22
3.3 Operating unit, operating add-on and cover cap (packaging unit) ...............23
3.3.1 Operating units and operating add-on .........................................23
3.3.2 Cover cap ...................................................................................24
3.4 Location of components.............................................................................25
3.4.1 Components in the Eco housing (fire terminal) ............................25
3.4.2 Components in the Standard housing (fire control panels) ...........26
3.4.3 Components in the Comfort housing (fire control panels).............27
3.4.4 Components in the Large housing (fire control panels) ................29
3.4.5 Components on operating unit ....................................................30
3.4.6 Position of modules for extended networking...............................31
4Mounting procedure............................................................................ 35
5Mounting and assembling a station....................................................... 37
5.1 Install rear panel ........................................................................................37
5.1.1 Surface mounting........................................................................37
5.2 Installing an additional housing ..................................................................38
5.3 Connect the mains cable ...........................................................................39
5.3.1 Cable routing ..............................................................................39
5.3.2 Standard connection ...................................................................41
5.4 Installing the operating unit and the operating add-on ................................42
5.4.1 Mounting and wiring the operating unit ........................................42
5.4.2 Install operating add-on...............................................................45
5.5 Mounting the cover cap..............................................................................46

Building Technologies
A6V10210390_j_en_
--
Fire
Safety
2015
-
12
-
15
4 | 222
6Installing, exchanging and connecting modules ......................................47
6.1 Replacing components ..............................................................................47
6.2 Periphery board (2-loop) ............................................................................48
6.2.1 Installation ..................................................................................48
6.2.2 Pin assignments .........................................................................49
6.3 Periphery board (4 loops) ..........................................................................55
6.3.1 Installation ..................................................................................55
6.3.2 Pin assignments .........................................................................56
6.4 Fire terminal board ....................................................................................62
6.4.1 Installation ..................................................................................62
6.4.2 Pin assignments .........................................................................64
6.5 Power supply (70W) ..................................................................................67
6.5.1 Installation ..................................................................................68
6.5.2 Pin assignments .........................................................................69
6.6 Power supply (150 W) ...............................................................................71
6.6.1 Installation ..................................................................................72
6.6.2 Fitting an additional power supply (150 W)..................................74
6.6.3 Pin assignments version A4........................................................76
6.6.4 Pin assignments version A5........................................................80
6.7 Shield connection terminal blocks [DE] ......................................................85
6.8 Loop extension ..........................................................................................87
6.8.1 Installation ..................................................................................87
6.8.2 Pin assignments .........................................................................88
6.9 Relay module ............................................................................................90
6.10 Install mounting plate.................................................................................91
6.10.1 Install mounting plate..................................................................91
6.11 Fire brigade periphery module [DE]............................................................93
6.11.1 Installation ..................................................................................93
6.11.2 Pin assignments .........................................................................95
6.12 Network module (SAFEDLINK)................................................................100
6.12.1 Installation ................................................................................100
6.12.2 Pin assignments .......................................................................102
6.13 Installing the fiber optic cable network module .........................................103
6.13.1 Replacing the DIN rail clip.........................................................103
6.13.2 Installation variants ...................................................................104
6.13.3 Pin assignments .......................................................................105
6.14 Ethernet switch FN2008 and safety module FN2009................................110
6.14.1 Installing the mounting kit..........................................................110
6.14.2 Installing the modules ...............................................................115
6.14.3 Wiring of FN2008 with fire terminal............................................116
6.14.4 Connecting the Ethernet switch.................................................119
6.14.5 Connecting the safety module FN2009......................................121
6.14.6 Modifications to the modules for class B....................................122

5 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
6.15 Installing an Ethernet switch (modular) FN2012 .......................................124
6.15.1 Installation of Ethernet modules ................................................124
6.15.2 DIN rail clip mounting................................................................125
6.15.3 Installing mounting kit FHA2029................................................126
6.15.4 Installing Ethernet switch FN2012 .............................................132
6.15.5 Wiring .......................................................................................136
6.15.6 Pin assignments .......................................................................138
6.16 Connection module (card cage) ...............................................................140
6.16.1 Installation ................................................................................140
6.17 Card cage................................................................................................141
6.17.1 Installation ................................................................................141
6.17.2 Pin assignment of the card cage (2 slots)..................................143
6.17.3 Pin assignment of the card cage (5 slots)..................................145
6.18 Module bus cards ....................................................................................147
6.18.1 Installation ................................................................................147
6.18.2 Pin assignments .......................................................................149
6.19 RS232 / RS485 module ...........................................................................162
6.19.1 Installation ................................................................................162
6.19.2 Pin assignments .......................................................................164
6.20 Event printer............................................................................................166
6.20.1 Installation ................................................................................166
6.20.2 Pin assignments .......................................................................168
6.21 Key switch (Kaba) FTO2005-C1...............................................................170
6.22 Redux module [DE]..................................................................................171
6.22.1 Installation ................................................................................171
6.22.2 Pin assignments .......................................................................172
6.23 Input/output module FDCIO224 [DE]........................................................172
6.23.1 Installation ................................................................................172
6.24 Sounder module ......................................................................................173
6.24.1 Installation ................................................................................173
6.24.2 Pin assignments .......................................................................174
6.25 Modes of mounting for modules ...............................................................177
6.25.1 Mounting on DIN rail or mounting plate......................................178
6.25.2 Mounting in housing FDCH221 .................................................179
6.26 RT interface [NL] .....................................................................................180
6.26.1 Installation ................................................................................180
6.26.2 Pin assignments .......................................................................181
6.27 Cable kit (communication)........................................................................186
6.28 Insert license key.....................................................................................187
6.29 19" mounting kit.......................................................................................188
6.30 Batteries ..................................................................................................189
6.31 Operating add-on with 20 zones EVAC-NL [NL] .......................................190
6.31.1 Adjustment elements.................................................................192

Building Technologies
A6V10210390_j_en_
--
Fire
Safety
2015
-
12
-
15
6 | 222
6.32 Remote EVAC-NL and EVAC-NL mimic display driver .............................193
6.32.1 Remote 20-zone EVAC-NL indicator .........................................193
6.32.2 Fitting the EVAC-NL mimic display driver FT2003-N1................194
6.32.3 Pin assignments .......................................................................196
6.32.4 Cable length and cable resistance.............................................198
6.32.5 Indicators..................................................................................200
6.32.6 Connection FTI2002-N1............................................................201
6.32.7 Connection FTO2007-N1 ..........................................................208
6.33 Door contact kit [DE]................................................................................210
6.33.1 Installation ................................................................................210
6.33.2 Pin assignments .......................................................................211
7Removal ..........................................................................................212
8Concluding work ...............................................................................213
8.1 Insert printing paper.................................................................................213
9Installation checklist ..........................................................................217
Glossary ...................................................................................................219
Index .......................................................................................................220

About this document
App
licable documents
1
7 |
222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
1About this document
Goal and purpose
This document describes the installation process for the stations and components
of the fire detection system. It especially provides information on the following:
●Mounting of the stations
●Mounting of the individual components
●Assembly of the stations
This document contains instructions only with respect to mounting and
deinstallation procedures.
Document A6V10210355, Description, contains an overview of the structure and
operating principle of the fire detection system. The description also provides an
overview of the structure of the documentation.
Scope
The information contained in this document is valid for introduction package IP6.
The document also contains information on country-specific components. Country-
specific components are marked with square brackets, e.g. [DE]. It may be the
case that these cannot be used in your country.
Target groups
The information in this document is intended for the following target groups:
Target group Activity Qualification
Installation personnel ●Assembles and installs the product
components at the place of
installation.
●Carries out a function check
following installation.
●Has received specialist training in
the area of building installation
technology or electrical installations.
Commissioning personnel ●Configure the product at the place
of installation according to
customer-specific requirements.
●Check the product operability and
release the product for use by the
operator.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.
●Has attended the training courses
for commissioning personnel.
Maintenance personnel ●Carries out all maintenance work.
●Checks that the products are in
perfect working order.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.
Source language and reference document
●The source/original language of this document is German (de).
●The reference version of this document is the international version in English.
The international version is not localized.

About this document
Applicable documents
1
8 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
Document identification
The document ID is structured as follows:
ID code Examples
ID_ModificationIndex_Language_COUNTRY
-- = multilingual or international
A6V10215123_a_de_DE
A6V10215123_a_en_--
A6V10315123_a_--_--
Date format
The date format in the document corresponds to the recommendation of
international standard ISO 8601 (format YYYY-MM-DD).
Conventions for text marking
Markups
Special markups are shown in this document as follows:
⊳Requirement for a behavior instruction
1.
2.
Behavior instruction with at least two operation sequences
– Version, option, or detailed information for a behavior instruction
⇨Intermediate result of a behavior instruction
⇨End result of a behavior instruction
●Numbered lists and behavior instructions with an operation
sequence
[➙ X] Reference to a page number
'Text' Quotation, reproduced identically
<Key> Identification of keys
>Relation sign and for identification between steps in a sequence,
e.g., 'Menu bar' > 'Help' > 'Help topics'
↑Text Identification of a glossary entry
Supplementary information and tips
The 'i' symbol identifies supplementary information and tips for an easier way of
working.
1.1 Applicable documents
Document ID Title
A6V10210355 FS720 Fire Detection System Description
A6V10210368 FS720 Fire Detection System Characteristic Product Data
A6V10210416 FS720 Fire Detection System, Commissioning, Maintenance, Troubleshooting

About this document
Download center
1
9 |
222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
1.2 Download center
You can download various types of documents, such as data sheets, installation
instructions, and license texts via the following Internet address:
http://siemens.com/bt/download
κEnter the document ID in the 'Find by keyword' input box.
You will also find information
about search variants and links to mobile
applications (apps) for various systems on the home page.
1.3 Revision history
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a
language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document's revision history:
Version Edition date Brief description
j 2015-12-15 Edition: Introduction Package IP6
New:
●Chapter 'Installing an Ethernet switch (modular) FN2012'
●Pin assignment for power supply (70 W) FP2015 inserted
Corrections and additions
●Chapter 'Installing mounting kits' adapted for FN2008 and FN2009
●Referenced documents updated
●Chapter 'Insert license key' updated
●Chapter 'Components on operating unit' legend corrected
●Chapter 'Event printer' – 'Connection on printer side' product version 02
integrated
●Chapter 'RS232/RS485 module'; cable gland on operating unit removed. All
corresponding graphics revised
i 2014-02-10 Information on voltage ranges revised in relation to supply outputs for fire terminal
board
h 2013-11-14 Edition: Introduction Package IP5
Change to date format according to ISO 8601
New
Integrating fire control panel FC723:
●Arrangement of components in the Comfort housing
●Installation of card cage (2 slots)
Installation and wiring of module bus cards for AlgoRex migration:
●Line card (SynoLOOP) FCL7201-Z3
Corrections and additions:
●Note on Ethernet loop FN2008 added.
●RS485 module: Slot address assignment
Various minor corrections and adaptations

About this document
Revision history
1
10 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
Version Edition date Brief description
g 2012-05 Edition: Introduction Package IP4
●I/O card (horn/monitored) FCI2009-A1
●I/O card (RT) FCI2007-A1
●Fiber optic cable network module (SM/MM) FN2006-A1/FN2007-A1
●Power supply unit (150 W) Version A5
●Power supply unit (150 W) Version A4 changed
f 2010-06 ●Revision history redefined and standardized
●Integration of PMI & mainboard FCM2027
●Modification of the Scalance modules to class B
●Installation of FN2008 and FN2009 revised (symmetry element removed)
●Integration of the remote EVAC-NL indicator and EVAC-NL mimic display
driver
●Pin assignment for event printer FTO2001-A1 changed
e 2010-03 Second edition MP3.0 XS for VdS:
●Assignment of manufacturer designation "Scalance" to BT designation
d 2009-10 First edition MP3.0 XS for VdS
Installation of:
●Card cage (5 slots) FCA2008-A1
●Connection module (card cage) FCA2006-A1
●Module bus cards
●Scalance module
c 2009-03 Second revised edition MP1XS
b 2009-01 First extended edition MP1XS
a 2008-09 First edition MP1XS

Safety
Safety instructions
2
11 |
222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
2Safety
2.1 Safety instructions
The safety notices must be observed in order to protect people and property.
The safety notices in this document contain the following elements:
●Symbol for danger
●Signal word
●Nature and origin of the danger
●Consequences if the danger occurs
●Measures or prohibitions for danger avoidance
Symbol for danger
This is the symbol for danger. It warns of risks of injury.
Follow all measures identified by this symbol to avoid injury or death.
Additional danger symbols
These symbols indicate general dangers, the type of danger or possible
consequences, measures and prohibitions, examples of which are shown in the
following table:
General danger Explosive atmosphere
Voltage/electric shock Laser light
Battery Heat
Signal word
The signal word classifies the danger as defined in the following table:
Signal word Danger level
DANGER DANGER identifies a dangerous situation, which will result directly in death or
serious injury if you do not avoid this situation.
WARNING WARNING identifies a dangerous situation, which may result in death or serious
injury if you do not avoid this situation.
CAUTION CAUTION identifies a dangerous situation, which could result in slight to
moderately serious injury if you do not avoid this situation.
NOTICE NOTICE
identifies possible damage to property that may result from non-
observance.

Safety
Safety instructions
2
12 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
How risk of injury is presented
Information about the risk of injury is shown as follows:
WARNING
Nature and origin
of the danger
Consequences if the danger occurs
●
Measures / prohibitions for danger avoidance
How possible damage to property is presented
Information about possible damage to property is shown as follows:
NOTICE
Nature and origin of the danger
Consequences if the danger occurs
●Measures / prohibitions for danger avoidance

Safety
Safety regulations for the method of operation
2
13 |
222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
2.2 Safety regulations for the method of operation
National standards, regulations and legislation
Siemens products are developed and produced in compliance with the relevant
European and international safety standards. Should additional national or local
safety standards or legislation concerning the planning, mounting, installation,
operation or disposal of the product apply at the place of operation, then these
must also be taken into account together with the safety regulations in the product
documentation.
Electrical installations
WARNING
Electrical voltage
Electric shock
●Work on electrical installations may only be carried out by qualified
electricians or by instructed persons working under the guidance and
supervision of a qualified electrician, in accordance with the electrotechnical
regulations.
●Wherever possible disconnect products from the power supply when carrying
out commissioning, maintenance or repair work on them.
●Lock volt-free areas to prevent them being switched back on again by mistake.
●Label the connection terminals with external external voltage using a
'DANGER External voltage' sign.
●Route mains connections to products separately and fuse them with their own,
clearly marked fuse.
●Fit an easily accessible disconnecting device in accordance with IEC 60950-1
outside the installation.
●Produce earthing as stated in local safety regulations.
CAUTION
Noncompliance with the following
safety regulations
Risk of injury to persons and damage to property
●
Compliance with the following regulations is required.
●Specialist electrical engineering knowledge is required for installation.
●Only an expert is permitted to carry out installation work.
Incorrect installation can take safety devices out of operation unbeknown to a
layperson.

Safety
Safety regulations for the method of operation
2
14 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
Mounting, installation, commissioning and maintenance
●If you require tools such as a ladder, these must be safe and must be intended
for the work in hand.
●When starting the fire control panel ensure that unstable conditions cannot
arise.
●Ensure that all points listed in the 'Testing the product operability' section below
are observed.
●You may only set controls to normal function when the product operability has
been completely tested and the system has been handed over to the customer.
Testing the product operability
●Prevent the remote transmission from triggering erroneously.
●If testing building installations or activating devices from third-party companies,
you must collaborate with the people appointed.
●The activation of fire control installations for test purposes must not cause
injury to anyone or damage to the building installations. The following
instructions must be observed:
–Use the correct potential for activation; this is generally the potential of the
building installation.
–Only check controls up to the interface (relay with blocking option).
– Make sure that only the controls to be tested are activated.
●Inform people before testing the alarm devices and allow for possible panic
responses.
●Inform people about any noise or mist which may be produced.
●Before testing the remote transmission, inform the corresponding alarm and
fault signal receiving stations.
Modifications to the system design and the products
Modifications to the system and to individual products may lead to faults,
malfunctioning and safety risks. Written confirmation must be obtained from
Siemens and the corresponding safety bodies for modifications or additions.
Modules and spare parts
●Components and spare parts must comply with the technical specifications
defined by Siemens. Only use products specified or recommended by
Siemens.
●Only use fuses with the specified fuse characteristics.
●Wrong battery types and improper battery changing lead to a risk of explosion.
Only use the same battery type or an equivalent battery type recommended by
Siemens.
●Batteries must be disposed of in an environmentally friendly manner. Observe
national guidelines and regulations.
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for damage or injuries
caused by the incorrect application of the instructions or the disregard of danger
warnings contained in the documentation. This applies in particular to the following
damage:
●Personal injuries or damage to property caused by improper use and incorrect
application
●Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
●Personal injury or damage to property caused by poor maintenance or lack of
maintenance

Safety
Standards and directives complied with
2
15 |
222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
2.3 Standards and directives complied with
A list of the standards and directives complied with is available from your Siemens
contact.
2.4 Release Notes
Limitations to the configuration or use of devices in a fire detection installation with
a particular firmware version are possible.
WARNING
Limited or non
-
existent fire detection
Personal injury and damage to property in the event of a fire.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
NOTICE
Incorrect planning
and/or configuration
Important standards and specifications are not satisfied.
Fire detection installation is not accepted for commissioning.
Additional expense resulting from necessary new planning and/or configuration.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.

Overview
Packaging units
3
16 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
3Overview
3.1 Packaging units
The stations can be delivered in several packaging units. Mounting and assembly
are carried out on-site.
The delivery consists of the following packaging units:
●Pre-installed rear panel, with periphery board, power supply, disconnect
terminal block and wiring
●Pre-installed operating unit with cover cap
●If ordered: Operating add-on with cover cap
●Options
When unpacking the station do
not damage or dispose of the packaging.
The packaging includes a drilling template for the corresponding station housing.
The packaging of the rear panel can be used as protection after mounting to
protect the open station against soiling and damage.
3.2 Station rear panels (packaging unit)
The following chapters show views of the stations as they are delivered. The
design of the rear panels differs depending on the housing and the type of the
station.
You will find detailed information about the housing types and individual stations in
document A6V10210355.
You will find detailed information about the individual components in document
A6V10210368.

Overview
Station rear panels (packaging unit)
3
17 |
222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
3.2.1 Rear panel in Eco housing
The fire terminal is available in the Eco housing.
Figure 1: Fire terminal in Eco rear panel
1 Eco rear panel
2 Opening for cable feed from rear side
3 DIN rail for disconnect terminal blocks
4 Fastening tabs for the cover cap
5 Hole for wall mounting (top)
6 Recesses for the hinges of the operating unit
7 Mounting holes for operating unit
8 Fire terminal board
9 Holes for wall mounting (bottom)
6
7
8
9
7
7
9
7
6
1234
2
5

Overview
Station r
ear panels (packaging unit)
3
18 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
3.2.2 Rear panel in Standard housing
The setup of the different fire control panels in the Standard housing is always
identical.
Figure 2: Fire control panel in Standard rear panel
1 Standard rear panel
2 Hole for wall mounting (top)
3 Fastening tabs for the cover cap
4 Openings for cable feed from rear side
5 Recesses for the hinges of the operating unit
6 Mounting holes for operating unit
7 Periphery board (2-loop)
8 Holes for wall mounting (bottom)
9 Secondary-side cabling of the power supply
10 Primary-side cabling of the power supply
11 Power supply
12 DIN rail with network separation terminals, also for additional components
13 Strain relief for mains supply cable
2
5
6
7
13
4
13
12
6
11
6
5
6
8
10
9
8
9

Overview
Station rear panels (packaging unit)
3
19 |
222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
3.2.3 Rear panel in Comfort housing
With the exception of the periphery board type, the setup of fire control panels
FC722 and FC724 in the Comfort housing is identical.
Example of a fire control panel FC724 in Comfort rear panel:
1
Comfort rear panel
9
Secondary
-
side cabling of the power supply
2
Mounting holes for operating unit
10
Mounting holes for the operating add
-
on
3
Holes for wall mounting (top)
11
Recesses for the hinges of the operating add
-
on
4
DIN rail for additional components
12
Power supply (150 W)
5
Fastening tabs for the cover cap
13
Holes for wall mounting (bottom)
6
Openings for cable feed from rear side
14
Strain relief for mains supply cable
7 Recesses for the hinges of the operating unit 15 DIN rail with network separation terminals, also
for additional components
8
Periphery board
16
Primary
-
side cabling of the power supply
7
6
8
9
10
12 4
5
7
15
11
13
2
2
11
12
11
10
13
7
6
16
14
7
11
3

Overview
Station rear panels (packaging unit)
3
20 | 222
Building Technologies
A6V10210390_j_en_
--
Fire Safety
2015
-
12
-
15
3.2.4 Rear panel in Large housing
FC726 as an example of the fire control panel setup in the Large housing:
Figure 3: Fire control panel in Large rear panel
1 Large rear panel
2 Holes for wall mounting (top)
3 Fastening tabs for the cover cap
4 Openings for cable feed from rear side
5 Recesses for the hinges of the operating unit
6 Mounting holes for operating unit
7 Periphery board (4 loops)
8 Secondary-side cabling of the power supply
6
5
6
7
8
9
10
123
4
2
6
5
11
10
9
12
13
18
6
10
15
14
13
10
17
16