Siemens Polymobil 10 Guide

Polymobil 10
English
Print No.: RXR8-120.101.01.05.02 Date of creation: 07.05
Replaces: RXR8-120.101.01.04.02
© Siemens AG 2005
The reproduction, transmission or
use of this document is not permit-
ted without express written author-
ity. Offenders will be liable for
damages. All rights, including
rights created by patent grant or
registration of a utility model _or_
design,_are_reserved.
Maintenance protocol
RXR8-120.105.01.05.02 is required for
these instructions
SP
Maintenance Instructions

Polymobil 10 RXR8-120.101.01 Page 2 of 4 Siemens AG
Rev. 05 07.05 CS PS 24 Medical Solutions
0 - 2 Revision level
Document revision level
The document corresponds to the version/revision level effective at the time of system delivery.
Revisions to hardcopy documentation are not automatically distributed.
Please contact your local Siemens office to order current revision levels.
Disclaimer
The installation and service of equipment described herein is to be performed by qualified personnel
who are employed by Siemens or one of its affiliates or who are otherwise authorized by Siemens or
one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated with or autho-
rized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or
one of its affiliates before attempting installation or service procedures.
System check at the start of the preventive maintenance
The system condition should be checked through remote service (if available). If error reports occur
the required spare parts will need to be ordered. If necessary, make a new appointment for preventive
maintenance.
You need to conduct a quick test directly on the system. To do this, you can use quality assurance or
similar procedures.
Check if the system log contains any system problems (if available).
Any anomalies require that the necessary escalation measures be initiated. If necessary, make a new
appointment for preventive maintenance.
Chapter Page Rev.
All All 05

Table of Contents 0 - 3
Siemens AG RXR8-120.101.01 Page 3 of 4 Polymobil 10
Medical Solutions Rev. 05 07.05 CS PS 24
1 _______General information ____________________________________________ 1 - 1
Required documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Tools, measurement andauxiliary equipment required . . . . . . . . . . . . . . . . . 1 - 1
Required lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Emphasized texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
Safety information and protective measures . . . . . . . . . . . . . . . . . . . . . . 1 - 3
Description of abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6
Information on the protective conductor resistance test . . . . . . . . . . . . . . . . . 1 - 6
Information on measuring the system leakage current . . . . . . . . . . . . . . . . . 1 - 8
Technical Safety Checks (TSC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 11
2 _______Inspection and maintenance _____________________________________ 2 - 1
Visual inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Check the system for damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Customer documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Check screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Check handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
Checking the wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Checking the pedal positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Single tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
Double-slot diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5
Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6
Radiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8
Control console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 11
Protective conductor test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 12
Leakage current measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 13
Concluding work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 14
3 _______Electrical safety/reports _________________________________________ 3 - 1
Protective conductor resistance/report . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
Leakage current/report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3
4 _______Changes to Previous Version_____________________________________ 4 - 1
Page

0 - 4 Table of Contents
Polymobil 10 RXR8-120.101.01 Page 4 of 4 Siemens AG
Rev. 05 07.05 CS PS 24 Medical Solutions
Page

General information 1 - 1
Siemens AG RXR8-120.101.01 Page 1 of 14 Polymobil 10
Medical Solutions Rev. 05 07.05 CS PS 24
1 General information
1.1 Required documents
* Within the purview of DIN VDE 0751-1, we recommend documenting the maintenance
results both in the maintenance protocol and in the TSC protocol. The protocols should
be filled out completely and handed over to the client after maintenance is completed.
1.2 Tools, measurement andauxiliary equipment required
1.3 Required lubricants
•Maintenance protocol RXR8-120.105.01...
•Service instructions RXR8-120.061.01...
•Operator manual RXR8-120.201.01...
•Block Diagram X050I
•Function Description RXR8-120.041.01...
•Technical safety checks * SP00-000.834.01...
All tools, measuring equipment and aids, with the exception of
those marked with "*", are listed and specified in the STC
('Service Tools Catalogue').
•Standard service tool kit *
•2-channel storage oscilloscope
•Ground wire test meter
•Device leakage current measuring device
•Torque wrench 20-100 Nm
•Loctite 242
•Multi-purpose WD-40 spray 28 70 061
•Optimol Longtime PD2 grease 0.71 oz (20 g)
2.20 lb (1 kg)
34 91 271 or
73 95 445
NOTE