Siemens MAMMOMAT 1000 Operating and maintenance instructions

MAMMOMAT 1000/3000/3000 Nova - Opdimar
Register 8 English
Print No.: SPB7-230.101.03.04.02 Doc. Gen. Date: 07.03
Replaces: SPB7-230.101.03.03.02
© Siemens AG 2003
The reproduction, transmission or
use of this document or its contents
is not permitted without express
written authority. Offenders will be
liable for damages. All rights,
including rights created by patent
grant or registration of a utility
model _or_design,_are_reserved.
The maintenance protocol
SPB7-230.105.03.04.02
is required for this instruction
Maintenance Instructions
(66 47 460)

OpdimarRegister 8 SPB7-230.101.03 Page 2 of 4 Siemens AG
Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions
0 - 2 Revision
Document revision level 0
The document corresponds to the version/revision level effective at the time of system delivery. Revi-
sions to hardcopy documentation are not automatically distributed.
Please contact your local Siemens office to order current revision levels.
Disclaimer 0
The installation and service of equipment described herein is to be performed by qualified personnel
who are employed by Siemens or one of its affiliates or who are otherwise authorized by Siemens or
one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated with or autho-
rized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or
one of its affiliates before attempting installation or service procedures.
Chapter Page Revision
All All 04

Contents 0 - 3
Siemens AG Register 8 SPB7-230.101.03 Page 3 of 4 Opdimar
Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions
Document revision level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1 _______General information ____________________________________________ 1 - 1
Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
Required documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Required tools, measurement and auxiliary devices . . . . . . . . . . . . . . . . . 1 - 1
Text emphasis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2
Safety Information and Preventive Measures . . . . . . . . . . . . . . . . . . . . . 1 - 2
2 _______System Status _________________________________________________ 2 - 1
Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
3 _______System _______________________________________________________ 3 - 1
Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
4 _______Testing _______________________________________________________ 4 - 1
Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
Calibrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
5 _______Miscellaneous _________________________________________________ 5 - 1
Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
Final tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
Page

0 - 4 Contents
OpdimarRegister 8 SPB7-230.101.03 Page 4 of 4 Siemens AG
Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions
This page intentionally left blank.

General information 1 - 1
Siemens AG Register 8 SPB7-230.101.03 Page 1 of 2 Opdimar
Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions
1 General information
1.1 Training
•Training workshop or at least 1 installation
1.2 Required documents
1.3 Required tools, measurement and auxiliary devices
•Protective ground wire tester (44 15 899 RV090)
•Stereo calibration phantom (included in the Opdimardelivery) (part No. 64 30 701)
•Acrylic plastic (PMMA = Poly-methyl-met-acrylate) plates:
3 plates of AEC calibration plexiglas 150 mm x 150 mm x19 mm (part No. 65 61 232) and
one plate calibration plexiglas, 150 mm x 150 mm x 9,7 mm (part No. 65 61 224)
•Grid object table
•Mammography bar pattern (5-20 lp/mm),
for instance Nuclear Associates Resolution Test Pattern (07-555), http://www.nucl.com
•Cleaning agents* specified in Instructions for Use MAMMOMAT 1000/3000 Nova ,
chapter
Cleaning, Disinfection
•Standard service tools*
•Instructions for Use MAMMOMAT 1000/3000 Nova SPB7-230.201...
•Supplement to the Instructions for Use MAMMOMAT 3000-
Opdimar
(Included in the Opdimardelivery)
SPB7-230.203.13...
•MAMMOMAT 1000/ 3000/ 3000 Nova - Opdimar
Service Instructions
(Included in the Opdimardelivery)
SPB7-230.061.11 ...
All tools, measurement and auxiliary devices listed, with the
exception of those marked with " * ", are specified in the STC
(Service Tools Catalogue).
NOTICE

OpdimarRegister 8 SPB7-230.101.03 Page 2 of 2 Siemens AG
Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions
1 - 2 General information
1.4 Text emphasis
1.5 Safety Information and Preventive Measures
"WARNINGS" are information provided with special emphasis
when there is the potential for personal injury to the operator or
patient.
"CAUTIONs" are information provided with special emphasis
when there is the potential for damage to the equipment.
"NOTICEs" are information provided with special emphasis to
facilitate proper use of the equipment or proper execution of a
procedure
.
•When completing repair work and tests, please note:
-the product-specific safety information in the document
-the safety information in RA0-000.012.40...
•Tests or adjustments that must be made with radiation are
identified with the radiation warning symbol .
During these types of adjustments, radiation protective clothing
must be worn.
WARNING
CAUTION
NOTICE
CAUTION

System Status 2 - 1
Siemens AG Register 8 SPB7-230.101.03 Page 1 of 2 Opdimar
Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions
2 System Status
2.1 Checks
Check the system status and fill in the Maintenance Protocol.
•Check the serial No. and the part No. for the workstation, the CCD camera and the
biopsy controller.
•Check the licence key (Dicom option).
•For instructions how to check the hostname/hostid see Service Instructions for
Opdima
r , chapter Instruction for obtaining the systems host ID and hostname .
•Document country settings in the Maintenance Protocol.
•If applicable, document network and printer parameters in the Maintenance Protocol.

OpdimarRegister 8 SPB7-230.101.03 Page 2 of 2 Siemens AG
Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions
2 - 2 System Status
This page intentionally left blank.

System 3 - 1
Siemens AG Register 8 SPB7-230.101.03 Page 1 of 2 Opdimar
Medical Solutions Rev. 04 07.03 CS PS 24 Maintenance Instructions
3System
3.1 Checks
PMP MO storage media and MO unit
The MO disks shall be handled with care. They shall never be forced into or out of the
drive. They shall not be exposed to heat or fluids. Never put heavy objects on an MO disk.
The MO drive unit is relatively sensitive to dust.
•Check that the unit is installed in a clean environment and is not exposed to dust.
•Check that right MO media is used. Only Sony standard media
(Siemens part No. 66 33 734, Sony RMO-S561, 9.1 GB rewritable)
shall be used as MO media.
•Check that the MO disks are stored in a clean and safe place.
•Check that the local disks and backup disks are properly labeled.
•Check that backup disks are stored separately.
•The MO disks used in the Opdimarsystem are equipped with an mechanical write
protection lock. This lock shall NEVER be used since the Opdimarsystem always
attempts to mount the MO disk as a read/write device.
OPD00609
Fig. 1 Write protection lock not activated

OpdimarRegister 8 SPB7-230.101.03 Page 2 of 2 Siemens AG
Maintenance Instructions Rev. 04 07.03 CS PS 24 Medical Solutions
3 - 2 System
PMP Scsi cables, cd-rom
It is important to check that the SCSI cables are properly connected and the hardware is
right terminated. If not, this might generate a lot of problems e.g. failure to write images to
MO disk, corrupted MO disk, corrupted hard disk.
•Make sure the SCSI cabling is properly connected, and fixed, to the units and that the
cable is not bent too much just behind the MO.
•The MO drive shall be terminated with the external termination plug.
If the system not have been able to store images on the MO disk due to above problem, it
will take longer to save images when the system can save.
PMP Cables general
•Check connectors and cables between biopsy controller and CCD camera.
•Check connectors and cables between biopsy controller and workstation.
•Check that all cables are free from damages, especially monitor cables.
•Check that connectors are properly fixed.
SW Disk cache settings
For instructions how to check the disk cache settings see Service Instructions for
Opdima
r , chapter Disk cache settings .
SI Biopsy unit
This unit contains the following safety-relevant parts, which should be checked every year
and, if required, replaced:
•Biopsy unit connectors (25 pin DSUB connector and 9-pin object table connector). Visual
inspection.
•Sliding pads on the underside of the biopsy unit object table. Check that the sliding pads
are free from visual damages and that the biopsy unit object table runs smoothly on the
base plate.
•Check that the biopsy unit is safely locked to the MAMMOMAT.
It is important not to interrupt the system when it is saving
images on the MO disk, the MO disk can be destroyed.
CAUTION