Siemens COMPS User manual

806939A02
s
1 / 7
LCD Power Supply
LCD Power Supply
LCD Fuente de Alimentación
Installation Instructions / Instructivo de Instalación
COMPS / 3VL9000-8AB01
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
3VL9000-8AB01Item: COMPS
U.S. Cat. No. Euro Order No.
I.L. No. 806939A02
806932_ _ _
3ZX1012-0VL68-1BA2
COMKIT2 / 3VL9600-8AQ31
COMKIT1 / 3VL9800-8AQ11
COMEXT / 3VL9000-8AQ21
For Use With Frame JG, LG, MG
Para Usar Con Caja Base JG, LG, MG
For Use With Frame DG, FG, NG, PG
Para Usar Con Caja Base DG, FG, NG, PG
Cal ISO 6789
For Use With Frame DG, FG, JG, LG, MG, NG & PG
With Type 576 Trip Units
Para Usar Con Caja Base DG, FG, JG, LG, MG, NG & PG
Con Tipo 576 Disparadores
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Qualified Personnel: This device/system may only be set up and
used in conjunction with these instructions. Installation, maintenance
and operation of a device/system may only be performed by
qualified personnel. Within the context of this manual, qualified
persons are defined as persons who have the skills and knowledge
related to the construction and operation of the electrical equipment
and installations and have received safety training to recognize and
avoid the hazards involved.
Personal Calificado: Este dispositivo/sistema debe solamente ser
montado y usado junto con estas instrucciones. Instalación,
mantenimiento y operación de un dispositivo/sistema debe
solamente ser realizado por personal calificado. Dentro del
contexto de este manual, personas calificadas están definidas como
quien tiene habilidades y conocimiento relacionado con la operación
de equipo eléctrico e instalaciones, y ha recibido entrenamiento de
seguridad y evite estar envuelto en peligros.
NOTE - These instructions do not purport to cover all details or variations in
equipment, or to provide for every possible contingency to be met in connection
with installation, operation or maintenance. Should further information be
desired or should particular problems arise, which are not covered sufficiently
for the purchaser’s purposes, the matter should be referred to the local
Siemens sales office. The contents of this instruction manual shall not become
part of or modify any prior or existing agreement, commitment or relationship.
The sales contract contains the entire obligation of Siemens. The warranty
contained in the contract between the parties is the sole warranty of Siemens.
Any statements contained herein do not create new warranties or modify the
existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered
trademarks of Siemens AG or Siemens Industry, Inc. The remaining trademarks
in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.

2 / 7 806939A02
2
COMEXT / 3VL9000-8AQ21
Option:
Opción:
3
X14.09
X14.11
OK
24 V
Class 2
2 X
4 lb.in
[ 0.5 Nm ]
16-12 AWG
[ 1.5 - 4 mm² ]
.27”
[ 7 mm ]
1
Installed [ Instalado ]:
For Frame DG, FG, NG, PG
COMKIT1 / 3VL9800-8AQ11
For Frame JG, LG, MG
COMKIT2 / 3VL9600-8AQ31
Trip
[ Interrumpir ]

3 / 7
3.39”
[ 86 mm ]
1.39”
[ 35.3mm ]
0.19”
[ 4.9mm ]
5”
[ 127 mm ]
1.37” ( 35mm )
DIN RAIL MOUNT
[ Riel de Montaje tipo DIN ]
806939A02
General Information:
[ Información General ]:
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
3.56”
[ 90.5 mm ] 2.28”
[ 58 mm ]
1.38”
[ 35 mm ]
2.47”
[ 62.7 mm ]
COMPS
ZSI – Zone Selective Interlocking
[ ZSI - Bloqueador selectivo de zona ]
24 VDC +
24 VDC –
Class 2
Input from another
COMPS connected to a
different Circuit Breaker.
Entrada de otro
COMPS conectado a un
diferente Interruptor
Ouput to another COMPS
connected to a different
Circuit Breaker or to a
COMPRO / COMMOD
Salida a otro COMPS conectado
a un diferente Interruptor o a un
COMPRO/COMMOD
U
U
General Information:
[ Información General ]:
Equipment Ground
[ tierra del equipo ]
X14.13
U

4 / 7 806939A02
General Information:
[ Información General ]:
COMPS
ZSI – Zone Selective Interlocking
[ ZSI - Bloqueador selectivo de zona ]
12-16 AWG
[ 1.5 – 4 mm²]
.27” [ 7 mm ]
X14.1
X14.2
X14.7
X14.8
X14.8
UU
X14.7
U
COMPS COMPS
X14.1
X14.2
U
COMMOD
or
COMPRO
Equipment Ground
[ tierra del equipo ]
Equipment Ground
[ tierra del equipo ]

5 / 7
COMPS
ZSI – Zone Selective Interlocking
[ ZSI -Bloqueador selectivo de zona ]
806939A02
Technique - # 1
[ Método ]
Technique - # 2
[ Método ]
Technique - # 3
[ Método ]
1 X ≤1000 feet
[ 1 X ≤300 meters ]
2 X ≤500 feet
[ 2 X ≤150 meters ]
3 X ≤33 feet
[ 3 X ≤10 meters ]
COMPS
COMPS
COMPS
COMPS
COMPS COMPS
COMPS
COMPS COMPS
COMPS
COMPSCOMPS
COMMOD
OR
COMPRO
COMMOD
OR
COMPRO
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.

6 / 7 806939A02
LCD / COMPS SETTINGS
DEFAULT SCREEN
DEFAULT SCREEN
VIEW SETPOINTS
LAST TRIP STATUS
CHANGE SETPOINTS
ENTER PASSWORD
BREAKER ACTION
CHANGE PROTECTION
TOP OF LIST
CHANGE ZSI
CHANGE COM
ADDRESS
BOTTOM OF LIST
SELECT LANGUAGE
BOTTOM OF LIST
LSI / TRIP UNIT
CHANGE PASSWORD
OPTION -
ZONE SELECTIVE
MODE
DATA
ZONE SELECTIVE
DISABLED
ZONE SELECTIVE
IN AND OUT
ZONE SELECTIVE
OUTPUT ONLY
ZONE
SELECTIVE
METHOD
ZONE SELECTIVE
SHORT TIME
ZONE SELECTIVE
GF OR ST
ZONE SELECTIVE
GROUND FAULT
TOP OF LIST
CONTINUOUS
AMPS
LONG TIME
DELAY
SHORT TIME
SHORT TIME
PICKUP
SHORT TIME
DELAY
SHORT TIME
MODE
IOC AMPS
THERMAL
MEMORY
PREALARM
ENABLE
BOTTOM OF LIST
PREALARM
INSTALL BREAKER
POSITION SWITCH
BRKR POSITION SW
INSTALLED
BRKR POSITION SW
NOT INSTALLED
NEW COM
ADDR = 0
NEW COM
ADDR = 131
BOTTOM OF LIST
TOP OF LIST
COM
ADDRESS

For Support in Europe refer to :
Bestell-Nr. / Order No.: 3ZX1012-0VL68-1BA5 Internet: www.siemens.de/lowvoltage/technical-assistance GWA 4NEB 179 6939-10 DS 03
7 / 7
AJUSTE LCD / COMPS
PANTALLA ESTANDAR
VER VALORES / ADJOSTADOS
ULTIMO DISPARO ESTADO
CAMBIAR VAL
DE CONTROL
ENTRAR CONTRASENA
INTERRUPTOR
ACCION DEL
CAMBIAR PROTEC.
COMIENZO LISTA
CAMBIAR
ZSI
CAMBIAR COM
DIRECCION
SELECCIONAR IDIOMA
FIN DE LA LISTA
LSI / UNIDAD DISPARO
CAMBIAR CONTRASENA
SELECTIVO ZONA
MODO
SELECTIVO ZONA
ON V OFF
SELECTIVO ZONA
DESACTIVADA
SELECTIVO ZONA
SOLO SALIDA
SELECTIVO
ZONA
METODO
SELECTIVO ZONA
PAT O RET. CORTO
SELECTIVO ZONA
RETARDO CORTO
SELECTIVO ZONA
PUESTA A TIERRA
AMPERIOS
CONT
RETARDO
LARGO
TIEMPO CORTO
TIEMPO CORTO
INICIO
RETARDO
CORTO
MODO TIEM.
CORTO
AMPS SOBREC INST
MEMORIA
TERMICA
PRE-ALARMA
ACTIVAR
FIN DE LA LISTA
PRE-ALARMA
INSTALAR POSIS.
INTERRUPTOR SW
POSIS. INTERR SW
NO INSTALADO
POSIS. INTERR SW
INSTALADO
NUEVA DIR
COM = 0
PANTALLA ESTANDAR
FIN DE LA LISTA
COMIENZO LISTA
COMIENZO LISTA
FIN DE LA LISTA
COM
DIRECCION
NUEVA DIR
COM = 131
DATOS
OPTION -
806939A02
Subject to change without prior notice © Siemens Industry Inc. 2010
Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.
Technical Support: Toll Free: 1-800-241-3138 Internet: www.usa.siemens.com/powerdistribution