Siemens RUGGEDCOM RMC30 User manual

RUGGEDCOM RMC30
Installation Guide
01/2017
RC1008-EN-05
Preface
Introduction 1
Installing the Device 2
Communication Ports 3
Technical Specifications 4
Dimension Drawings 5
Certification 6

RUGGEDCOM RMC30
Installation Guide
ii
Copyright © 2017 Siemens Canada Ltd
All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized
except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or
trademark registration.
This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be
photocopied, reproduced or translated to another language without the prior written consent of Siemens Canada Ltd.
Disclaimer Of Liability
Siemens has verified the contents of this document against the hardware and/or software described. However, deviations between the product
and the documentation may exist.
Siemens shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the furnishing,
performance, or use of this material.
The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions. We
appreciate any suggested improvements. We reserve the right to make technical improvements without notice.
Registered Trademarks
RUGGEDCOM™ and ROS™ are trademarks of Siemens Canada Ltd.
Other designations in this manual might be trademarks whose use by third parties for their own purposes would infringe the rights of the
owner.
Third Party Copyrights
Siemens recognizes the following third party copyrights:
• Copyright © 2004 GoAhead Software, Inc. All Rights Reserved.
Security Information
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, machines, equipment
and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens' products and solutions
undergo continuous development. Siemens recommends strongly that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and
integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be
considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity .
To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://
support.automation.siemens.com .
Warranty
Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance
during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all
warranties null and void. The warranties set forth in this article are exclusive and are in lieu of all other warranties, performance guarantees
and conditions whether written or oral, statutory, express or implied (including all warranties and conditions of merchantability and fitness for
a particular purpose, and all warranties and conditions arising from course of dealing or usage or trade). Correction of nonconformities in the
manner and for the period of time provided above shall constitute the Seller’s sole liability and the Customer’s exclusive remedy for defective
or nonconforming goods or services whether claims of the Customer are based in contract (including fundamental breach), in tort (including
negligence and strict liability) or otherwise.
For warranty details, visit www.siemens.com/ruggedcom or contact a Siemens customer service representative.

RUGGEDCOM RMC30
Installation Guide
iii
Contacting Siemens
Address
Siemens Canada Ltd
Industry Sector
300 Applewood Crescent
Concord, Ontario
Canada, L4K 5C7
Telephone
Toll-free: 1 888 264 0006
Tel: [phone]
Fax: [phone]
E-mail
[email protected]
Web
www.siemens.com/ruggedcom

RUGGEDCOM RMC30
Installation Guide
iv

RUGGEDCOM RMC30
Installation Guide

Table of Contents
v
Table of Contents
Preface ............................................................................................................ vii
Alerts ................................................................................................................................................. vii
Related Documents ............................................................................................................................ viii
Accessing Documentation .................................................................................................................. viii
Training ............................................................................................................................................ viii
Customer Support .............................................................................................................................. viii
Chapter 1
Introduction ..................................................................................................... 1
1.1Feature Highlights ........................................................................................................................ 1
1.2Description ................................................................................................................................... 2
Chapter 2
Installing the Device ......................................................................................... 5
2.1Mounting the Device .................................................................................................................... 5
2.1.1Mounting the Device on a DIN Rail ...................................................................................... 6
2.1.2Mounting the Device to a Panel .......................................................................................... 7
2.2Connecting Power ........................................................................................................................ 7
2.2.1Connecting AC Power ......................................................................................................... 8
2.2.2Connecting DC Power ........................................................................................................ 9
2.3Connecting to the Device ............................................................................................................ 10
2.4Resetting the Device ................................................................................................................... 11
Chapter 3
Communication Ports ...................................................................................... 13
3.1Copper Ethernet Ports ................................................................................................................. 13
3.2Serial Terminal ............................................................................................................................ 15
3.2.1RS232 Data Ports ............................................................................................................. 15
3.2.2RS485/422 Data Ports ....................................................................................................... 16
Chapter 4
Technical Specifications .................................................................................. 19
4.1Power Supply Specifications ........................................................................................................ 19
4.2Copper Ethernet Port Specifications .............................................................................................. 19
4.3Supported Networking Standards ................................................................................................. 20
4.4Operating Environment ............................................................................................................... 20


Table of Contents
RUGGEDCOM RMC30
Installation Guide
vi
4.5Mechanical Specifications ............................................................................................................ 20
Chapter 5
Dimension Drawings ....................................................................................... 21
Chapter 6
Certification .................................................................................................... 23
6.1Approvals ................................................................................................................................... 23
6.1.1CSA ................................................................................................................................. 23
6.1.2European Union (EU) ....................................................................................................... 24
6.1.3FCC ................................................................................................................................. 24
6.1.4FDA/CDRH ........................................................................................................................ 24
6.1.5Industry Canada ............................................................................................................... 24
6.1.6Other Approvals ............................................................................................................... 25
6.2EMC and Environmental Type Tests .............................................................................................. 25

RUGGEDCOM RMC30
Installation Guide

Preface
Alerts vii
Preface
This guide describes the RUGGEDCOM RMC30. It describes the major features of the device, installation,
commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible for the installation,
commissioning and maintenance of the device. It is also recommended for use by network and system planners,
system programmers, and line technicians.
CONTENTS
•“ Alerts ”
•“Related Documents”
•“Accessing Documentation”
•“Training”
•“Customer Support”
Alerts
The following types of alerts are used when necessary to highlight important information.
DANGER!
DANGER alerts describe imminently hazardous situations that, if not avoided, will result in death or
serious injury.
WARNING!
WARNING alerts describe hazardous situations that, if not avoided, may result in serious injury and/or
equipment damage.
CAUTION!
CAUTION alerts describe hazardous situations that, if not avoided, may result in equipment damage.
IMPORTANT!
IMPORTANT alerts provide important information that should be known before performing a procedure
or step, or using a feature.
NOTE
NOTE alerts provide additional information, such as facts, tips and details.


Preface
RUGGEDCOM RMC30
Installation Guide
viii Related Documents
Related Documents
Other documents that may be of interest include:
•ROS User Guide for the RUGGEDCOM RMC30
Accessing Documentation
The latest user documentation for RUGGEDCOM RMC30 is available online at www.siemens.com/ruggedcom. To
request or inquire about a user document, contact Siemens Customer Support.
Training
Siemens offers a wide range of educational services ranging from in-house training of standard courses on
networking, Ethernet switches and routers, to on-site customized courses tailored to the customer's needs,
experience and application.
Siemens' Educational Services team thrives on providing our customers with the essential practical skills to make
sure users have the right knowledge and expertise to understand the various technologies associated with critical
communications network infrastructure technologies.
Siemens' unique mix of IT/Telecommunications expertise combined with domain knowledge in the utility,
transportation and industrial markets, allows Siemens to provide training specific to the customer's application.
For more information about training services and course availability, visit www.siemens.com/ruggedcom or
contact a Siemens Sales representative.
Customer Support
Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general
information, contact Siemens Customer Support through any of the following methods:
Online
Visit http://www.siemens.com/automation/support-request to submit a Support Request (SR) or check on the status of an
existing SR.
Telephone
Call a local hotline center to submit a Support Request (SR). To locate a local hotline center, visit http://
www.automation.siemens.com/mcms/aspa-db/en/automation-technology/Pages/default.aspx .
Mobile App
Install the Industry Online Support app by Siemens AG on any Android, Apple iOS or Windows mobile device and be able to:
• Access Siemens' extensive library of support documentation, including FAQs and manuals
• Submit SRs or check on the status of an existing SR
• Contact a local Siemens representative from Sales, Technical Support, Training, etc.
• Ask questions or share knowledge with fellow Siemens customers and the support community

RUGGEDCOM RMC30
Installation Guide
Chapter 1
Introduction
Feature Highlights 1
Introduction
The RUGGEDCOM RMC30 is an industrially hardened, 2-port Serial-to-Ethernet server that has been specifically
designed to operate in electrically harsh and climatically demanding environments. The RUGGEDCOM RMC30
allows communication with virtually any serial device via Ethernet, providing simple and reliable network
connectivity.
The RUGGEDCOM RMC30 is packaged in a compact, galvanized steel enclosure that allows either DIN or panel
mounting for efficient use of cabinet space. It has an integrated power supply with a wide range of voltages for
worldwide operability. An operating temperature range of -40 to 85°C (-40 to 185°F) without the use of internal
cooling fans allows it to be placed in almost any location. The RUGGEDCOM RMC30 is compliant with EMI and
environmental standards for utility substations, industrial manufacturing, process and control and intelligent
transportation systems applications.
The RUGGEDCOM RMC30 offers both an RS232 port and a RS485/422 port simultaneously via a solid screw down
terminal block. The 10Base-T Ethernet port supports both auto-negotiation and auto-crossover detection and
simplifies cabling. Simple and intuitive network based configuration using either the built in Web or Telnet server
makes setup a breeze. The RUGGEDCOM RMC30’s superior ruggedized design coupled with the Rugged Operating
System™ (ROS®) provides improved system reliability making it ideally suited for creating Ethernet networks for
mission critical, real-time, control applications.
CONTENTS
•Section1.1, “Feature Highlights”
•Section1.2, “Description”
Section1.1
Feature Highlights
Connectivity
• 1 x RS232 and 1 x RS422/485 port
• 1 x 10Base-TX port
• Fully compliant EIA/TIA RS485 and RS232 ports
• Built-In optional RS485 Termination
Serial Encapsulation
• Transmit serial data over an IP network
• Support for Modbus TCP, DNP 3, TIN serial protocols
• Baud rates up to 230 kbps
• Point to point and multi-point modes
• Convert Modbus RTU to Modbus TCP

Chapter 1
Introduction
RUGGEDCOM RMC30
Installation Guide
2 Description
• Support multiple Modbus masters
• Use Serial IP port redirection software to support PC applications statistics and built-in sniffer for
troubleshooting
Designed for Harsh Environments
• Operates over a temperature range of -40 to 85 °C (-40 to 185 °F) without the use of fans for improved
reliability
• 21 AWG galvanized steel enclosure suitable for DIN or panel mounting provide secure mechanical reliability
Section1.2
Description
The RUGGEDCOM RMC30 features various ports, controls and indicator LEDs on the display panel for connecting,
configuring and troubleshooting the device. The display panel can be located on the rear, front or top of the
device, depending on the mounting configuration.
9
6
7
4 5
8
3
1
2
Figure1: RUGGEDCOM RMC30
1.ALARM LED 2.POWER LED 3.Serial Terminal 4.Reset Button 5.Copper Ethernet Port with LEDs 6.TX LED 7.RX LED
8.Power Terminal Block 9.Chassis Ground Terminal
ALARM LED Illuminates when an alarm condition exists.
POWER LED Illuminates when power is being supplied to the device.
State Description
Green Power is on
Off Power is off
RESET Button Shuts down and restarts the device. For more information, refer to Section2.4, “Resetting
the Device” .
TX/RX LEDs Indicate the connection status of the serial terminal.

RUGGEDCOM RMC30
Installation Guide
Chapter 1
Introduction
Description 3
LED State Description
TX Green (Blinking) Transmitting serial data
RX Green (Blinking) Receiving serial data
Serial Terminal The RS232/RS422/RS485 serial terminal serves a dual purpose:
• The RS232 terminals allow for a direct interface with the device and access to initial
management functions. For information about connecting to the device via the serial
terminal, refer to Section2.3, “Connecting to the Device” .
• The RS422/RS485 terminals allow for half or full duplex serial connections respectively. For
more information, refer to Chapter3, Communication Ports .
Power Supply Terminal A pluggable terminal. For more information, refer to:
•Section2.2, “Connecting Power”
•Section4.1, “Power Supply Specifications”
Communication Ports Receive and transmit data. For more information about the various ports available for the
RUGGEDCOM RMC30, refer to Chapter3, Communication Ports .

Chapter 1
Introduction
RUGGEDCOM RMC30
Installation Guide
4 Description

RUGGEDCOM RMC30
Installation Guide
Chapter 2
Installing the Device
Mounting the Device 5
Installing the Device
The following sections describe how to install the device, including mounting the device, installing/removing
modules, connecting power, and connecting the device to the network.
DANGER!
Electrocution hazard – risk of serious personal injury and/or damage to equipment. Before performing
any maintenance tasks, make sure all power to the device has been disconnected and wait
approximately two minutes for any remaining energy to dissipate.
WARNING!
Radiation hazard – risk of serious personal injury. This product contains a laser system and is classified
as a CLASS 1 LASER PRODUCT. Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
IMPORTANT!
This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall
render all warranties null and void.
Changes or modifications not expressly approved by Siemens Canada Ltd could invalidate
specifications, test results, and agency approvals, and void the user's authority to operate the
equipment.
IMPORTANT!
This product should be installed in a restricted access location where access can only be gained by
authorized personnel who have been informed of the restrictions and any precautions that must be
taken. Access must only be possible through the use of a tool, lock and key, or other means of security,
and controlled by the authority responsible for the location.
CONTENTS
•Section2.1, “Mounting the Device”
•Section2.2, “Connecting Power”
•Section2.3, “Connecting to the Device”
•Section2.4, “Resetting the Device”
Section2.1
Mounting the Device
The RUGGEDCOM RMC30 is designed for maximum mounting and display flexibility. It can be equipped with
connectors that allow it to be installed in a 35 mm (1.4 in) DIN rail or directly on a panel.

Chapter 2
Installing the Device
RUGGEDCOM RMC30
Installation Guide
6 Mounting the Device on a DIN Rail
IMPORTANT!
Heat generated by the device is channeled outwards to the enclosure. As such, it is recommended that
2.5 cm (1 in) of space be maintained on all open sides of the device to allow for some convectional
airflow.
Forced airflow is not required. However, any increase in airflow will result in a reduction of ambient
temperature and improve the long-term reliability of all equipment mounted in the rack space.
NOTE
For detailed dimensions of the device with either DIN rail or panel hardware installed, refer to
Chapter5, Dimension Drawings .
CONTENTS
•Section2.1.1, “Mounting the Device on a DIN Rail”
•Section2.1.2, “Mounting the Device to a Panel”
Section2.1.1
Mounting the Device on a DIN Rail
For DIN rail installations, the RMC30 can be equipped with a DIN rail bracket pre-installed on the back of the
chassis. The bracket allows the device to be slid onto a standard 35 mm (1.4 in) DIN rail.
To mount the device to a DIN rail, do the following:
1. Align the slot in the bracket with the DIN rail.
1
1
2
3
Figure2:DIN Rail Mounting
1.DIN Rail 2.DIN Rail Bracket 3.Screw Driver
2. Pull the release on the bracket down and slide the device onto the DIN rail. If necessary, use a screw driver to
unlock the release. Let go of the release to lock the device in position.

RUGGEDCOM RMC30
Installation Guide
Chapter 2
Installing the Device
Mounting the Device to a Panel 7
Section2.1.2
Mounting the Device to a Panel
To mount the device to a panel, do the following:
1. Place the panel adapter against the panel and secure it with screws.
113
12
4
4
5
1
Figure3:Panel Mounting
1. RUGGEDCOM RMC30  2.Panel Adapter 3.Mounting Holes 4.Screw 5.Metal Clips
2. Insert the device into the adapter. Make sure the device is secured between the two metal clips.
Section2.2
Connecting Power
The RUGGEDCOM RMC30 supports a single integrated high AC/DC or low DC power supply
NOTE
• For 110/230 VAC rated equipment, an appropriately rated AC circuit breaker must be installed.
• For 125/250 VDC rated equipment, an appropriately rated DC circuit breaker must be installed.
• Use only #16 gage copper wiring when connecting terminal blocks.
• Equipment must be installed according to applicable local wiring codes and standards.

Chapter 2
Installing the Device
RUGGEDCOM RMC30
Installation Guide
8 Connecting AC Power
• All line-to-ground transient energy is shunted to the Surge Ground terminal. In cases where users
require the inputs to be isolated from ground, remove the ground braid between Surge and Chassis
Ground. Note that all line-to-ground transient protection circuitry will be disabled.
IMPORTANT!
Siemens requires the use of external surge protection in VDSL applications where the line may be
subject to surges greater than that for which the device is rated. Use the following specifications as a
guide for VDSL external surge protection:
• Clamping Voltage: 50 V to 200 V
• Insertion Loss: < 0.1 dB at 10 MHz
• Peak Surge Current: 10 kA, 8x20µs waveform
CONTENTS
•Section2.2.1, “Connecting AC Power”
•Section2.2.2, “Connecting DC Power”
Section2.2.1
Connecting AC Power
To connect a high AC power supply to the device, do the following:
CAUTION!
Electrical hazard – risk of damage to equipment. Before testing the dielectric strength (HIPOT) in the
field, remove the braided ground cable connected to the surge ground terminal and chassis ground.
This cable connects transient suppression circuitry to chassis ground and must be removed in order to
avoid damage to transient suppression circuitry during testing.
1. Connect the positive wire from the power source to the positive/live (+/L) terminal on the terminal block.

RUGGEDCOM RMC30
Installation Guide
Chapter 2
Installing the Device
Connecting DC Power 9
1 2 3
4
Figure4:Terminal Block Wiring
1.Positive/Live (+/L) Terminal 2.Negative/Neutral (-/N) Terminal 3.Surge Ground Terminal 4.Braided Ground Cable
2. Connect the negative wire from the power source to the negative/neutral (-/N) terminal on the terminal block.
3. Using a braided wire or other appropriate grounding wire, connect the surge ground terminal to the chassis
ground connection. The surge ground terminal is used as the ground conductor for all surge and transient
suppression circuitry internal to the unit.
4. Connect the ground terminal on the power source to the chassis ground terminal on the device.
Section2.2.2
Connecting DC Power
To connect a high or low DC power supply to the device, do the following:
CAUTION!
Electrical hazard – risk of damage to equipment. Before testing the dielectric strength (HIPOT) in the
field, remove the braided ground cable connected to the surge ground terminal and chassis ground.
This cable connects transient suppression circuitry to chassis ground and must be removed in order to
avoid damage to transient suppression circuitry during testing.
1. Connect the positive wire from the power source to the positive/live (+/L) terminal on the terminal block.

Chapter 2
Installing the Device
RUGGEDCOM RMC30
Installation Guide
10 Connecting to the Device
1 2 3
4
Figure5:Terminal Block Wiring
1.Positive/Live (+/L) Terminal 2.Negative/Neutral (-/N) Terminal 3.Surge Ground Terminal 4.Braided Ground Cable
2. Connect the negative wire from the power source to the negative/neutral (-/N) terminal on the terminal block.
3. Using a braided wire or other appropriate grounding wire, connect the surge ground terminal to the chassis
ground connection. The surge ground terminal is used as the ground conductor for all surge and transient
suppression circuitry internal to the unit.
4. Connect the ground terminal on the power source to the chassis ground terminal on the device.
Section2.3
Connecting to the Device
The following describes the various methods for accessing the RUGGEDCOM ROS console and Web interfaces on
the device. For more detailed instructions, refer to the RUGGEDCOM ROS User Guide for the RUGGEDCOM RMC30.
RS232/RS422/RS485 Serial Console Terminal
Connect a PC or terminal directly to the RS232 serial terminals to access the boot-time control and RUGGEDCOM
ROS console interface.
IMPORTANT!
The console interface is intended to be used only as a temporary connection during initial
configuration or troubleshooting.
The serial terminal implements RS232 DCE (Data Communication Equipment) on a Phoenix-style compression
connector. For more information, refer to Section3.2, “Serial Terminal” .

RUGGEDCOM RMC30
Installation Guide
Chapter 2
Installing the Device
Resetting the Device 11
Communication Ports
Connect the copper Ethernet port to a management switch and access the RUGGEDCOM ROS console and
Web interfaces via the device's IP address. The factory default IP address for the RUGGEDCOM RMC30 is
https://192.168.0.1 .
For more information about available ports, refer to Chapter3, Communication Ports .
Section2.4
Resetting the Device
The RUGGEDCOM RMC30 can be reset (rebooted) using the RESET button. The RESET button is recessed and can
only be reached using a pin or small screwdriver.
To reset the device, quickly press and release the RESET button with a pin.

Chapter 2
Installing the Device
RUGGEDCOM RMC30
Installation Guide
12 Resetting the Device