Siemens PRIMERGY 560 User manual

PRIMERGY 560
Intel-based Server
Operating Manual

Is there ...
... any technical problem or other
question you need clarified?
Please contact:
• one of our IT Service Shops
• your sales partner
• your sales office
The addresses of our IT Service Shops
can be found in the guarantee coupon
booklet.
The latest information on our products,
tips, updates, etc., can be found on the
Internet under:
http://www.siemensnixdorf.com/pc
... anything you want to tell us
about this manual?
Please send us your comments quoting
the order number of the manual.
Siemens AG
Redaktion ICP CS BS2 OS ID 4
Otto-Hahn-Ring 6
D-81730 München

Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Siemens AG
D-33094 Paderborn
D-81730 München
Bestell-Nr./Order No.: A26361-K412-Z107-3-7619
A26361-K412-Z107-3-7619A26361-K412-Z107-3-7619
A26361-K412-Z107-3-7619
Printed in the Federal Republic of Germany
AG 1098 10/98
A26361-K412-Z107-1-7619

PRIMERGY 560
Operating Manual
Introduction
Important notes
Preparation for use and
operation
Settin
g
s in BIOS Setup
Propert
y
and data
protection
Troubleshootin
g
and tips
S
y
stem expansions
Boards and cablin
g
Technical data
Index
October 1998 edition

Your training needs?
The Siemens Training Centers offer you a wide range of training courses in
information technology and on IT products and other subjects - onsite near to your
workplace or offsite at one of our training centers.
Let us know your training requirements or request information from us -
the fastest way is via fax under: [phone]
Or write to:
Siemens AG
Training Center, Beratungsservice
D-81730 München
Intel and Pentium are registered trademarks of Intel Corporation, USA.
SCO and SCO Unix are registered trademarks of Santa Cruz Operation.
Windows is a registered trademark and Windows NT is a trademark of Microsoft Corporation.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright ãSiemens AG 1998.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.
Delivery subject to availability. Right of technical modification reserved.

A26361-K412-Z107-3-7619
Contents
Introduction ........................................................................................................... 1
Features.................................................................................................................. 2
Notational conventions............................................................................................ 3
Important notes ..................................................................................................... 5
Safety...................................................................................................................... 5
Manufacturer’s notes............................................................................................... 6
CE certificate.................................................................................................... 6
FCC Class A Compliance Statement ............................................................... 7
Power cord selection........................................................................................ 8
For the United States and Canada................................................................... 8
For the United Kingdom ................................................................................... 9
Disposal and recycling ................................................................................... 10
Energy saving under Windows NT................................................................. 11
Transporting the server ......................................................................................... 11
Preparation for use and operation..................................................................... 13
Unpacking and checking the delivery.................................................................... 13
Preparing the PC for use....................................................................................... 13
Setting up the server ............................................................................................. 14
Connecting the server ........................................................................................... 14
Connecting external devices .......................................................................... 15
Connecting the server to the line voltage....................................................... 16
Unlocking/locking the server.................................................................................. 18
Controls and indicators.......................................................................................... 19
Switching the server on and off ............................................................................. 21
Configuring the server........................................................................................... 22
ServerStart..................................................................................................... 22
Saving the EISA configuration........................................................................ 22
ICU Utility ....................................................................................................... 24
Configuring the Disk Array Controller............................................................. 24
Configuring the standard SCSI controller....................................................... 24
Installing the operating system....................................................................... 24
Cleaning the server ............................................................................................... 25
Settings in BIOS Setup ....................................................................................... 27
Calling BIOS Setup ............................................................................................... 27
Operating BIOS Setup........................................................................................... 29
Exiting BIOS Setup................................................................................................ 30

Contents
A26361-K412-Z107-3-7619
Property and data protection..............................................................................31
BIOS Setup security functions...............................................................................31
Setting the Setup password............................................................................33
Setting the System password .........................................................................35
Troubleshooting and tips....................................................................................37
Power-on indicator remains dark after you have switched on your device ............37
Server switches itself off........................................................................................38
The screen stays blank..........................................................................................38
Flickering stripes on the monitor screen ................................................................39
No screen display or display drifts .........................................................................40
No mouse pointer displayed on the screen............................................................40
The floppy disk cannot be read or written..............................................................41
Time and/or date is not correct ..............................................................................41
The system cannot be started up...........................................................................41
System will not boot after installing hard disk drives..............................................44
Drives are reported as "dead" at system boot .......................................................44
DAC reports added drive as defective ...................................................................44
Error messages on the screen...............................................................................44
System expansions .............................................................................................45
Opening the server ................................................................................................45
Removing the top panel..................................................................................46
Removing the control panel............................................................................47
Removing the side cover................................................................................48
Assembling the server ...........................................................................................49
Mounting the side cover..................................................................................49
Mounting the control panel .............................................................................50
Mounting the top panel...................................................................................51
Installing and removing a SCSI hard disk drive .....................................................52
Installing a RemoteView hard disk drive................................................................55
Installing and removing a power supply module....................................................58
Installing and removing an accessible drive ..........................................................59
Installing an accessible 5 1/4-inch drive .........................................................60
Removing an accessible 5 1/4-inch drive .......................................................62
Changing the floppy disk drive........................................................................64
Installing and removing boards..............................................................................66
Installing a board ............................................................................................66
Removing a board ..........................................................................................68
Installing a second processor board ......................................................................69
Installing the SE/DE converter boards...................................................................71
Extensions on the system board............................................................................73

Contents
A26361-K412-Z107-3-7619
Boards and cabling............................................................................................. 75
SCSI platter with SAF-TE function ........................................................................ 75
Disk array controller and standard controller on internal drives ............................ 77
Two standard controllers on internal drives........................................................... 78
Technical data ..................................................................................................... 79
Index..................................................................................................................... 81

A26361-K412-Z107-3-7619 1
Introduction
The PRIMERGY 560 is an Intel-based server for medium-size and large networks
and can be equipped with up to four Pentium Pro processors.
Its highly developed hardware and software components provide a high degree of
reliability and availability. Hardware components include hot-plug power supplies
and hot-replace hard disks, and memory modules with EDC option (Error Detection
and Correction). Software components include server management, PDA
(Prefailure Detection and Analyzing) and ASR&R (Automatic Server
Reconfiguration and Restart).
Security functions in the BIOS Setup and on the system board protect the data on
the server against manipulation. Additional protection is offered by the lockable
server door and an anti-theft facility.
This Operating Manual tells you how to put your server into operation, how to
operate it in daily use and how to expand your server.
Further information is provided:
• in the manual "Safety and Ergonomics"
• in the Technical Manual for the system board
• in the Operating Manual for the monitor
• in the manual for the ServerView server management
• in the manual for RemoteView
• in the documentation of your operating system
• in the information files of your operating system
• in the documentation for the boards and drives

Introduction Features
2A26361-K412-Z107-3-7619
Features
System board
The system board can accommodate one or two processor boards, each with one
or two Intel Pentium Pro processors. This enables the system to be expanded to a
four-processor system. The main memory has error detection and correction (EDC)
and can be extended up to four Gbytes. Three EISA, one EISA/PCI and five PCI
slots are available for expansion boards. The ASIC on the system board and
associated server management ensure high system reliability.
Hard disk subsystem
The hard disk subsystem comprises six 3 1/2-inch hard disk carriers and the SCSI
platter. The hard disk carriers are connected to the SCSI platter without cables and
are simple to install and remove. An SCSI hard disk drive can be installed in each
hard disk carrier. The subsystem is controlled by a standard controller or by a disk
array controller (DAC). If a DAC is installed in the server, a hard disk carrier can be
swapped during operation (hot replace).
Power supply
The power supply comprises up to three hot-plug power supply modules
connected in parallel in the server. Depending on the equipment level, a redundant
power supply can be achieved for the server with two or three power supply
modules. In the case of redundant power supply, it is a simple matter to exchange
a power supply module during operation (hot replace).
Server management
Server management is implemented on the system board with the aid of the
supplied ServerView software and PDA (Prefailure Detection and Analyzing)
technology from Siemens. The PDA analyzes and monitors all components
relevant to system reliability, thus enabling early detection of overload situations
and appropriate counter-measures. Further information on the ServerView server
management is provided in the manual of the same name.

Notational conventions Introduction
A26361-K412-Z107-3-7619 3
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
Pay particular attention to texts marked with this symbol. Failure to
observe this warning endangers your life, destroys the system, or may
lead to loss of data.
i
This symbol is followed by supplementary information, remarks and tips.
Ê Texts which follow this symbol describe activities that must be performed in the
order shown.
ËThis symbol means that you must enter a blank space at this point.
Ú
ÚÚ
ÚThis symbol means that you must press the Enter key.
Texts in this typeface are screen outputs from the PC.
Texts in this bold typeface are the entries you make via the keyboard.
Texts in italics indicate commands or menu item.
"Quotation marks" indicate names of chapters and terms that are being
emphasized.

A26361-K412-Z107-3-7619 5
Important notes
In this chapter you will find information regarding safety which it is essential to take
note of when working with your server. The manufacturer's notes contain helpful
information on your server.
Safety
!
Pay attention to the information provided in the manual "Safety and
Ergonomics".
• During installation and before operating the device, observe the instructions
on environmental conditions in the chapter entitled "Technical data" as well as
the instructions in the chapter "Preparation for use and operation".
• The ON/OFF switch does not cut off line voltage from the server. To
disconnect the line voltage completely, remove the power plug from the
grounded power outlet.
• When cleaning the Server, observe the relevant notes in the chapter
"Preparation for use and operation".
• When connecting and disconnecting cables, observe the relevant notes in the
chapter "Preparation for use and operation".
• Replace the lithium battery on the system board in accordance with the
instructions in the Technical Manual for the system board.
• The CD-ROM drive contains a light-emitting diode (LED), classified according
to IEC 825-1:1993:LASER CLASS 1.
• Keep this Operating Manual together with your device. If you pass on the
device to third parties, you should also pass on the Operating Manual.
• Please check whether the device is set to the local line voltage (see "Installing
and removing a power supply module").

Important notes Manufacturer's notes
6A26361-K412-Z107-3-7619
Boards with electrostatic sensitive devices (ESD) may be identified by labels.
When you handle boards fitted with ESDs, you must observe the following points
under all circumstances:
• You must always discharge yourself (e.g. by touching a grounded object)
before working.
• The equipment and tools you use must be free of static charges.
• Pull out the power plug before inserting or pulling out boards containing ESDs.
• Always hold boards with ESDs by their edges.
• Never touch pins or conductors on boards fitted with ESDs.
Manufacturer's notes
CE certificate
This device complies with the requirements of the EEC directive
89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low
voltage directive".

Manufacturer's notes Important notes
A26361-K412-Z107-3-7619 7
FCC Class A Compliance Statement
If there is an FCC statement on the device, then:
The following statement applies to the products covered in this manual, unless
otherwise specified herein. The statement for other products will appear in the
accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class A"
digital device, pursuant to Part 15 of the FCC rules and meets all requirements of
the Canadian Interference-Causing Equipment Regulations. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in strict accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Siemens AG is not responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution or attachment of
connecting cables and equipment other than those specified by Siemens AG. The
correction of interferences caused by such unauthorized modification, substitution
or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any
and all optional peripheral or host devices. Failure to do so may violate FCC rules.

Important notes Manufacturer's notes
8A26361-K412-Z107-3-7619
Power cord selection
The power cord for this unit has been
packed separately and has been
selected according to the country of
destination. It must be used to prevent
electric shock. Use the following
guidelines if it is necessary to replace
the original cord set.
The female receptacle of the cord set
must meet CEE-22 requirements (see
Figure 1).
Figure 1
For the United States and Canada
Use a UL listed and CSA labeled cord set consisting of a three conductor cord with
a maximum length of 15 feet.
For units which stand on a desk or table, type SVT or SJT cord sets shall be used.
For units which stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit. Please
consult Table A for the selection criteria for power cords used in the United States
and Canada.
Table A:
Cord Type Size of Conductors
in Cord Maximum Current Rating of Unit
SJT 18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT 18 AWG
17 AWG 10 Amps 12 Amps

Manufacturer's notes Important notes
A26361-K412-Z107-3-7619 9
For units set at 115 V:
use a parallel blade, grounding type attachment plug rated 15 A, 125 V (Figure 2).
For units set at 230 V (domestic use):
use a tandem blade, grounding type attachment plug rated 15 A, 250 V (Figure 3).
Figure 2 Figure 3
For units set at 230 V (outside of the United States and Canada):
use a cord set consisting of a minimum AWG according to Table A and a
grounding type attachment plug rated 15 A, 250 V. The cord set should have the
appropriate safety approvals for the country in which the equipment will be
installed and should be marked HAR.
For the United Kingdom
Should the plug on the flexible cord not be of the type for your socket outlets, do
not use an adapter but remove the plug from the cord and discard. Carefully
prepare the end of the supply cord and fit a suitable plug.
WARNING
THIS APPLIANCE MUST BE EARTHED

Important notes Manufacturer's notes
10 A26361-K412-Z107-3-7619
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows:
• The wire which is coloured Green and Yellow must be connected to the
terminal in the plug which is marked with the letter E or by the earth symbol or
coloured Green or Green and Yellow.
• The wire which is coloured Blue must be connected to the terminal which is
marked with the letter N or coloured Black.
• The wire which is coloured Brown must be connected to the terminal which is
marked with the letter L or coloured Red.
Disposal and recycling
This server is made predominantly of materials that are suitable for
environmentally-friendly disposal or specialized recycling.
Do not throw lithium batteries or accumulators into the trashcan. They must be
disposed of in accordance with local regulations concerning special waste.
If you have any questions on disposal, please contact your local office, our service
department, or, directly:
Siemens AG ICP CS
Recycling Center
D-33094 Paderborn
Tel.: ..[phone]
Fax: ..[phone]