Wireless Telephone Quick Reference Guide
Siemens Hicom 300
optiset E Standard
1725-36161-001_F Hicom is a trademark of Siemens
For technical support, please contact
your facility’s Network Administrator.
Function Key
Strokes Default
Settings Fill In Your
Feature Settings
FCN + 1 MUTE
FCN + 2 (Voice Mail)
FCN + 3
FCN + 4
FCN + 5
FCN + 6
FCN + 7
FCN + 8
FCN + 9 (Exit menus)
FCN + 0 SELECT
FCN + * PREVIOUS
FCN + # NEXT
On/Off Press and hold END. Two
chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this
at the end of each call.
Answer call Press START. Line indicator
comes on steady when the call
is answered.
Answer
second call Press HOLD to put your current
call on hold, or END to hang up.
Press LINE + the digit that is
flashing.
Hold Press HOLD
Take off Hold Press LINE followed by the digit
for the line on hold, which will be
flashing.
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook
allows you to scroll through
menu screens.
User Options Press the CFG softkey while on
hook to change handset
settings.
SpectraLink 6020 Wireless Telephone
The FCN and LINE labels represent the key sequence on the
Wireless Telephone mapped to the corresponding key on
the optiset E.
Pressing LINE followed by a digit (1-4) on the Wireless
Telephone is equivalent to pressing one of the
programmable line keys on the optiset E Basic.
Pressing FCN followed by a digit (2-8) on the Wireless
Telephone is equivalent to pressing one of the feature keys
on the optiset E Standard desk set. FCN followed by 9
allows you to exit the Wireless Telephone function menu.
The MSG icon lights on the Wireless Telephone when there
is voice mail.
Toggle between the two display views in order to see all 24
possible characters per line sent by the Hicom CS by
pressing LINE + #►and LINE + *◄. Use the arrow icons on
the display to determine which key to press.
For information on Battery Pack charging
and setting user preferences, see the
Wireless Telephone User Guide.
optiset E Standard
