Siemens HiPath 3000 V3.0 or later Gigaset M1... User manual

+L3DWK#6333#
+L3DWK#8333#560
+L3DWK#$OO6HUYH/#+LFRP#483#(2+
RSWL3RLQW#833#HQWU\
2SHUDWLQJ#,QVWUXFWLRQV

2
Before You Begin
These operating instructions describe the optiPoint 500 entry telephone on your
HiPath 3000 / 5000 RSM.
They describe all functions you can use from your telephone. You may find that some func-
tions you wish to use are not available on your telephone. This may be due to one of the
following reasons:
• The function has not been configured for your telephone - please contact your service
personnel.
• Your communications platforms does not support this function - please contact your
service personnel.
Important Notes
Never allow the telephone to come into contact with staining or aggressive liquids such as
coffee, tea, juice, or soft drinks.
For information on telephone maintenance Æpage 60.
The information provided in this document contains merely general descriptions or charac-
teristics of performance which in case of actual use do not always apply as described or
which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly agreed
in the terms of contract.
Marks
Do not operate the telephone in environments where there is a danger of
explosions.
Use only original Siemens accessories. Using other accessories may cause
a hazard and will invalidate the warranty and the CE mark.
Never open the telephone or a key module. If you encounter any problems,
contact the service personnel.
The device conforms to the EU guideline 1999/5/EG, as attested by the CE
mark.
This device has been manufactured in accordance with our certified environ-
mental management system (ISO 14001). This process ensures that energy
consumption and the use of primary raw materials are kept to a minimum,
thus reducing waste production.

Contents
3
Basic operating instructions . . . . . . . . . . . . . . . . . . . . 7
optiPoint 500 entry control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How to Use these Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . 8
Accessing Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
... With Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
... With Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ØBasic and Enhanced Functions
Making and Answering Calls . . . . . . . . . . . . . . . . . . 10
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Open Listening in the Room During a Call . . . . . . . . . . . . . . . . . . . . . . 10
Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Accepting a Waiting Call (Camp-On) . . . . . . . . . . . . . . . . . . . . . . . . 11
Preventing and Allowing Call Waiting (Automatic Camp-On). . . . . . 11
Turning the Call Waiting Tone On and Off . . . . . . . . . . . . . . . . . . . . 12
Accepting a Specific Call for Your Colleague. . . . . . . . . . . . . . . . . . . . . 12
Rejecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using Mailboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using Timed Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turning Do Not Disturb On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Trace Call: Identifying Anonymous Callers (Not for U.S.) . . . . . . . . . . . 14
Turning the Microphone On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Answering Calls from the Entrance Telephone and Opening the Door. 15
Making Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Dialing Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
On-Hook Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Caller ID Suppression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Talking to Your Colleague With a Speaker Call . . . . . . . . . . . . . . . . . . . 18
Activating Tone Dialing (DTMF Suffix Dialing) . . . . . . . . . . . . . . . . . . . . 18
Automatic Connection Setup (Hotline) . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reserve Trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Assigning a Station Number (Not for U.S.) . . . . . . . . . . . . . . . . . . . . . . 20
Trunk Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Associated Dialing/Dialing Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Contents
4
Calling Multiple Parties Simultaneously. . . . . . . . .21
Calling a Second Party (Consultation Hold) . . . . . . . . . . . . . . . . . . . . . . 21
Switching to the Party on Hold (Toggle) . . . . . . . . . . . . . . . . . . . . . 21
Conducting a Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adding Up to Five to the Conference
(Initiator Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Leaving a Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Ending a Conference (Initiator Only) . . . . . . . . . . . . . . . . . . . . . . . . 22
Removing the ISDN Central Office Party
From the Conference (Only for U.S.) . . . . . . . . . . . . . . . . . . . . . . . . 22
Transferring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
...After a Speaker Call (Announcement) in a Group . . . . . . . . . . . . . 23
Parking a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Retrieving a Parked Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Picking up (Retrieving) a Held Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Making Calls to Stored Destinations . . . . . . . . . . . .25
Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using Station and System Speed-Dial Numbers . . . . . . . . . . . . . . . . . . 25
Displaying and Assigning Call Charges. . . . . . . . . .26
Dialing with Call Charge Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . 26
If You Cannot Reach a Destination... . . . . . . . . . . . .27
Using Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Storing a Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Answering a Callback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Deleting (All) Stored Callbacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Call Waiting (Camp-On) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Busy Override - Joining a Call in Progress. . . . . . . . . . . . . . . . . . . . . . . 28
Telephone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Adjusting the Ring Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Adjusting the Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Adjusting the Receiving Volume During a Call . . . . . . . . . . . . . . . . . . . 29
Locking the Telephone to Prevent Unauthorized Use . . . . . . . . . . . . . . 30
Saving Your PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Saving Station Numbers and Appointments. . . . . .32
Storing Station Speed-Dial Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Saving Appointments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Contents
5
Testing the Telephone . . . . . . . . . . . . . . . . . . . . . . . . 33
Testing the Telephone Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using Variable Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using Night Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Call Forwarding in the Carrier Network
and Forwarding Multiple Subscriber Numbers (MSN) (Not for U.S.). . . 36
Using Other Functions . . . . . . . . . . . . . . . . . . . . . . . . 37
Sending a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Deleting Sent Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Answering Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using Another Telephone Like Your Own . . . . . . . . . . . . . . . . . . . . . . . 38
Change call number (relocate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Resetting Services and Functions
(System-Wide Cancellation for a Telephone). . . . . . . . . . . . . . . . . . . . . 40
Silent Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Monitoring a Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Activating Functions for Another Telephone . . . . . . . . . . . . . . . . . . . . . 42
Locking Another Telephone to Prevent Unauthorized Use . . . . . . . . . . 43
Using System Functions from the Outside
(DISA: Direct Inward System Access) . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Controlling Connected Computers or Other Programs
and Telephone Data Service (For HiPath 3500/3550/3700/3750 only) . 45
Controlling Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Radio Paging (Not for U.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Simple Paging Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Enhanced Paging Equipment (Hipath 3700/3750 Only) . . . . . . . . . . 47
ØTeam and Executive/Secretary Functions
Team and Executive/Secretary Functions With
Assigned Trunk Lines . . . . . . . . . . . . . . . . . . . . . . . . . 48
Forwarding Calls on Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Transferring Calls Directly to the Executive
(Only in an Executive/Secretary Group) . . . . . . . . . . . . . . . . . . . . . . . . . 49

Contents
6
Using Other Team Functions . . . . . . . . . . . . . . . . . . .50
Turning Group Call On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Accepting a Call for Another Member of Your Team . . . . . . . . . . . . . . 51
Activating and Deactivating a Ringing Group. . . . . . . . . . . . . . . . . . . . . 51
Uniform Call Distribution (UCD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
ØSystem networking via LAN (PC network)
Special Functions in the LAN (PC Network). . . . . .53
Leaving a Hunt Group/Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Transferring Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Using Night Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Activating and Deactivating a Ringing Group. . . . . . . . . . . . . . . . . . . . . 56
Controlling Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Opening the Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
ØAll About Your Telephone
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Fixing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Telephone Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
ØQuick-Reference Operating Instructions
(Appendix)

Basic operating instructions
7
Basic operating instructions
optiPoint 500 entry control panel
Keys for
telephone settings
Keypad
Handset
Speaker
for ring tones
Eight fixed function keys:
Consultation
Redial
Message Waiting
Callback
Speed Dial
Mute
Speaker
Release
LEDs
Your service personnel can customize the default assignment to meet your
preferences and requirements following order placement.

Step by Step
Basic operating instructions
8
How to Use these Operating Instruc-
tions
You will find a graphic representation of the steps in log-
ical sequence in the left column. Below is an explana-
tion of the symbols:
CLift the handset (off-hook).
IReplace the handset (on-hook).
HConduct a call.
DEnter a telephone number or code.
99 Enter the PIN.
Jor KPress volume controls on the telephone.
LYou hear a tone.
A long tone (positive confirmation tone) confirms that
you have successfully activated a function or procedure.
A short tone (negative confirmation tone) indicates that
the function or procedure was rejected.
Press the key.
Press the illuminated key.
Press the flashing key.

Basic operating instructions
9
Step by Step
Accessing Functions
... With Codes
You can activate the functions of your system by
entering codes such as:
FB@ DND (do not disturb) on.
GB@ DND (do not disturb) off.
All codes to activate or enable functions are always
introduced by pressing the star key, and all codes to
deactivate, disable or delete functions are always
entered starting with the pound key.
An alphabetically ordered overview of all functions and
their corresponding codes can be found in the
Appendix (Quick-Reference Operating Instructions).
... With Function Keys
Functions for which a key has been set up can be
accessed directly as follows.
Press the "consultation hold" key. The function is
executed, provided this is possible in the current
situation.
Basic and Enhanced Functions
If your service personnel has changed the default
assignments and saved functions on keys in ac-
cordance with your requests or requirements,
you can execute these functions by pressing the
appropriate keys.

Step by Step
Making and Answering Calls
10
Making and Answering Calls
Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone
rings once every four seconds (single-tone se-
quence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance tele-
phone, your telephone rings three times in rapid
succession every four seconds (triple-tone se-
quence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
Answering a Call
The telephone rings.
CLift the handset.
Jor KTo raise or lower the volume, keep pressing the keys un-
til the desired volume is set.
Ending the call:
IReplace the handset.
or
Press the key.
Open Listening in the Room During a
Call
You can let other people in the room join in on the call.
Let the other party know that you have turned on the
speaker.
Precondition: You are conducting a call with the hand-
set.
Activating this function:
Press the key. The LED lights up.
Deactivating this function:
Press the key. The LED goes out.
Release
Speaker
Speaker

Making and Answering Calls
11
Step by Step
Using Call Waiting
Callers can still reach you while you are engaged in an-
other call. A signal alerts you to the waiting call.
You can either ignore or accept the waiting call.
When you accept the waiting call, you can either end
the first call or place it on hold and resume the call later
on.
You can also bar call waiting or the call waiting tone
Æpage 11.
Accepting a Waiting Call (Camp-On)
Precondition: You are engaged in a phone call and hear
a tone (every six seconds).
Ending the first call and answering the waiting call:
IReplace the handset. Your telephone rings.
CAnswer the second call. Lift the handset.
Placing the first call on hold and answering the sec-
ond call:
F>>
Press the key. LED flashes. Enter the code.
You are connected to the call waiting party immediately.
The first party is placed on hold.
Ending the second call and resuming the first one:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key twice.
Preventing and Allowing Call Waiting (Auto-
matic Camp-On)
If this function has been configured (ask the service per-
sonnel), you can prevent or allow a second call
Æpage 11 from being signaled by automatic camp-on
during an ongoing call.
CLift the handset.
Consultation
Consultation
Consultation

Step by Step
Making and Answering Calls
12
G=B9
or F=B9
L
Enter the code to "prevent" or "allow" call waiting.
Turning the Call Waiting Tone On and Off
You can suppress the call waiting tone every six sec-
onds for external calls. A one-time special dial tone then
alerts you to the waiting call.
CLift the handset.
FA@ or GA@ LEnter code for "tone off" or "tone on".
Accepting a Specific Call for Your Col-
league
You hear another telephone ring.
CLift the handset.
F?B Enter the code.
DEnter the number of the telephone that is ringing.
Rejecting Calls
You can reject calls which you do not wish to take. The
call is then signaled at another definable telephone
(contact the service personnel).
The telephone rings.
Press the key.
If a call cannot be rejected, your telephone will continue
to ring.
Accepting calls in a team Æpage 51.
Release

Making and Answering Calls
13
Step by Step
Using Mailboxes
If there are messages waiting for you, you will hear a
special dial tone (continuous buzzing) when you lift the
handset.
CLLift the handset.
G?A< Enter the code.
or
Press the illuminated key.
This connects you to the sender of the message or the
mailbox system.
Using Timed Reminders
Precondition: You must have saved a timed reminder
Æpage 32. The current time is the time stored.
CIYour telephone rings.
Lift the handset and replace it again.
Using the Speakerphone
A colleague addresses you directly over the speaker
with a speaker call. You hear a tone before the an-
nouncement.
You can respond with the handset or in speakerphone
mode.
CLift the handset and answer the call.
Message Waiting
If you fail to answer the timed reminder, it re-
peats five times and is then erased.
Placing a speaker call to a colleague Æpage 18.

Step by Step
Making and Answering Calls
14
Turning Do Not Disturb On and Off
You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (contact the service personnel).
CLift the handset.
FB@ or GB@ LEnter the code for "on" or "off".
Trace Call: Identifying Anonymous
Callers (Not for U.S.)
You can have the carrier identify malicious external call-
ers. You can save the caller’s station number during the
call or for 30 seconds after the call ends. However, it is
essential that you do not replace your handset during
this time.
HYou are engaged in an external call.
FA=
Press the key. LED flashes. Enter the code.
Turning the Microphone On and Off
To prevent the other party from listening in while you
consult with someone in your office, you can temporari-
ly switch off the handset microphone or the handsfree
microphone.
Precondition: You are conducting a call. The
microphone is switched on.
Press the key. The LED lights up.
When you lift the handset, a special dial tone
(continuous buzzing) reminds you that "do not
disturb" is active.
Authorized internal callers can automatically
override the "do not disturb" function after five
seconds.
Consultation
After you have finished tracing the call, the data
is stored on the carrier’s system. Now contact
the service personnel.
Mute

Making and Answering Calls
15
Step by Step
Turning off the mute:
Press the illuminated key. The LED goes out.
Answering Calls from the Entrance
Telephone and Opening the Door
If an entrance telephone has been programmed, you
can use your telephone to speak to someone at the
entrance telephone and to activate a door opener.
If you are authorized to activate a door opener (contact
the service personnel), visitors can open the door them-
selves by entering a 5-digit code (e.g. using a DTMF
transmitter or installed keypad).
Speaking to visitors via the entrance telephone:
Precondition: Your telephone rings.
CLift the handset within thirty seconds. You are connect-
ed to the entrance telephone immediately.
or
CLift the handset after more than thirty seconds.
DDial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone:
F?:
Press the key. LED flashes. Enter the code.
DLDial the entrance telephone number.
Opening the door with a code (at the door):
DAfter ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Mute
Consultation
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æpage 58!

Step by Step
Making and Answering Calls
16
Activating the door opener:
CLift the handset.
FAB Enter the code.
DDial the entrance telephone number.
DLEnter the five-digit code. Default code = "00000" (con-
tact the service personnel).
:or ;Enter the type of door opener. 1 = enable with ring,
2 = enable w/o ring = You can also open the door with-
out a doorbell ring.
Deactivating the door opener:
CLift the handset.
GAB Enter the code.
DLDial the entrance telephone number.

Making Calls
17
Step by Step
Making Calls
Dialing Numbers
CLift the handset.
DInternal calls: Enter the station number.
External calls: Enter the external code and the station
number.
The called party does not answer or is busy:
IReplace the handset.
or
Press the key.
On-Hook Dialing
DInternal calls: Enter the station number.
External calls: Enter the external code and the station
number.
The other party answers with speaker:
CLift the handset.
The called party does not answer or is busy:
Press the key. The LED goes out.
or
Press the key.
Release
Speaker
Release

Step by Step
Making Calls
18
Caller ID Suppression
You can prevent your station number or name from ap-
pearing on the displays of external parties you call. The
feature remains active until you deactivate it.
CLift the handset.
FA? or GA? LEnter code for "suppress" or "restore".
Talking to Your Colleague With a
Speaker Call
You can make a loudspeaker announcement through a
loudspeaker if connected (ask the service personnel), or
to an internal user with an system telephone without
any action on their part.
CLift the handset.
FA9 Enter the code.
DLEnter the station number.
Activating Tone Dialing (DTMF Suffix
Dialing)
You can transmit dual-tone multifrequency (DTMF)
signals to control devices such as an answering
machine or automatic information system.
HYou have set up a connection.
F><
Press the key. LED flashes. Enter the code.
DYou can use the keys "0" through "9", "*", and "#" to
transmit DTMF signals.
The service personnel can turn caller ID suppres-
sion on and off for all telephones.
Consultation
Ending the call also deactivates DTMF suffix
dialing.
Your system may be configured so that you can
start DTMF suffix-dialing immediately after
setting up a connection.

Making Calls
19
Step by Step
Automatic Connection Setup (Hotline)
If this function is configured (contact the service per-
sonnel), the system automatically sets up a connection
to a preset internal or external destination.
CLift the handset.
Depending on the setting, the connection is either set
up immediately or only after a preset period of time
(hotline after a timeout).
Reserve Trunk
If this feature is configured (contact the service person-
nel), you can reserve a busy trunk for your own use.
When the trunk is free, you receive a call.
CLift the handset.
DEnter the external code. The external trunk is busy; you
hear a busy signal tone. Wait about 5 seconds until the
busy tone ends.
The trunk is reserved.
IReplace the handset.
When the reserved trunk becomes free:
Your telephone rings.
CLift the handset. You hear the CO dial tone.
DEnter the number of the external station.

Step by Step
Making Calls
20
Assigning a Station Number
(Not for U.S.)
If this function has been configured (contact the service
personnel), you can selectively assign a specific num-
ber (DID number) to your telephone before making an
external call. The assigned number then appears on the
called party’s display.
CLift the handset.
F=: Enter the code.
DEnter the DID number you wish to use.
DDial the external number.
Trunk Flash
To activate ISDN-type services and features through the
network carrier’s analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Precondition: You have set up an external connection
via an analog line.
F>:
Press the key. LED flashes. Enter the code.
DEnter the service code and/or telephone number.
Associated Dialing/Dialing Aid
If this function has been configured (contact the service
personnel), you can use your telephone as a dialing aid
for other telephones.
CLift the handset.
F?@ Enter the code.
DLEnter the internal station number of the party for whom
you want to dial.
DEnter the number you wish to dial (external number
with external code).
Consultation