Siemens HiPath 8000 OpenStage 15 User manual

Communication for the open minded
Siemens Enterprise Communications
www.siemens-enterprise.com
Documentation
HiPath 8000
OpenStage 15
Quick Reference Guide

Operating your phone
2
Operating your phone
Key field
Keypad
In cases where text input is possible, you can use the keypad to input text, punctuation
and special characters. To do this, press the numerical keys repeatedly.
Additional functions on the asterisk and hash keys:
Display
Key Function during text input Function when held down
*Write special characters. Deactivate the ring tone
#Switch between upper and lower case
and number entry.
Activate the telephone lock.
NService menu
OVoicemail/call lists
nActivate/deactivate the loudspeaker
+Set situation-specific
-volumes e. g. for ringtones
or loudspeaker
<Scroll back
=Confirm a function
:Scroll forward
jKeypad
SProgrammable
function keys
13:15 Sat 27.07.07
2222 HiPath 8000
Time and date
Own phone number and menu icon
13:15 27.07.07
A1
Time and date
A new entry in the call lists

Important operating procedures
3
Important operating procedures
In idle mode
Answering a call via the handset
Z^
Accepting a call in speakerphone mode
Zn
Rejecting a call
Zf"Reject" =
Deflecting a call
Zf"Deflect" =jDestination number =
Dialing from the caller list
Of"Calls" =f"Missed", "Dialed", "Received" or "Forwarded" =
frequired entry =f"Dial" =
Activating callback
jDestination number =on no reply or busy: f"Call back" =
Redialing a number
SRedial f"Dialed" frequired number =^
Programming call forwarding
SCall forwarding f"Edit call forwarding" =
f"Destination" (e.g. under "All calls") ="Edit favorites" =
f"Destination 1" =jNumber =f"Options = Save & exit" =
f"Save & exit" =f"Destination" (under required forwarding type e.g. "All calls") =
fSelect number =required forwarding type e.g. f"All calls" =f"On" =
f"Options = Save & exit" =f"Save & exit" =
Activating/deactivating call forwarding for all calls
SCall forwarding / RCall forwarding
^Lift the handset jEnter the text or number
\Replace the handset fSelecting an entry
[Conduct call ZRingtone/call waiting tone
Next operating step

Important operating procedures
4
During a call with station A
Switching to speakerphone mode
nHold down \(only for USA: n\)
Consultation
f"Consultation" = jStation number B =[Station B
f"Disconnect & return" =[Station A
Accepting call waiting
ZCall waiting tone f"Accept" =[Station B f"Disconnect & return" =
[Station A
Forwarding a call on call waiting
ZCall waiting tone f"Deflect" = jStation B number =[Station A
Start conference
"Consultation" = jStation B number=[Station B
f"Conference" =[Station A and B
Start conference with call waiting
ZCall waiting tone f"Accept" =[Station B f"Conference" =
[Station A and B
Transferring a call with station B without consultation
f"Consultation" =jDestination number =\
Transferring a call after consultation
f"Consultation" = jStation B number =[Station B \

Copyright © Siemens Enterprise
Communications GmbH & Co. KG
Hofmannstr. 51
80200 München
Deutschland
Siemens Enterprise
Communications GmbH & Co. KG
is a Trademark Licensee of Siemens AG
Reference No:
A31003-S2000-U137-2-7619
The information provided in this document
contains merely general descriptions or char-
acteristics of performance which in case of
actual use do not always apply as described
or which may change as a result of further
development of the products.
An obligation to provide the respective char-
acteristics shall only exist if expressly agreed
in the terms of contract. Availability and
technical specifications are subject to
change without notice. OpenScape,
OpenStage and HiPath are registered trade-
marks of Siemens Enterprise
Communications GmbH & Co. KG.
All other company, brand, product and ser-
vice names are trademarks or registered
trademarks of their respective holders.
Siemens Enterprise Communications
www.siemens-enterprise.com
Communication for the open minded