Siemens HiPath 1100 User manual

HiPath 1100
HiPath 1120
HiPath 1150
HiPath 1190
Analog telephones
DTMF and DP
Quick Reference Guide
KBA.book Seite 1 Freitag, 26. Januar 2007 9:34 09

2
Explanation of symbols
Numbering Plan
Seizure of an external line
Symbol Explanation
(d)If you are using an MF analog telephone, press the Flash key.
ll, q,p... Enter numbers, keys, password, internal or external numbers, etc.
wSignaling with a short beep
nLift the handset.
sStart conversation
tReplace the handset
Description HiPath 1120 HiPath 1150 HiPath 1190
External line 801 to 808 801 to 832 801 to 845
Extension, including S011 t o 3 0 11 t o 6 0
610 to 645
101 to 240
Group of external lines 0, 890 to 899
Internal subscriber group 770 to 779
Hunt Groups (HG) 780 to 789
UCD subscriber group 790 to 799
Carrier 9
EVM - Default internal number 790
EVM - Message ports 7491 to 7492
EVM - Virtual ports 744 to 747
Fax/DID - Virtual Message ports 740 to 743
USB/CAPI line 10 100
Substitution for * and # 75 and 76 (accordingly)
Feature Code
External call ndps
External call using a group of exter-
nal lines n lmd.lmm pexternal line
s
Seizure of a specific external line n lde.lhi ps
Internet Access
Activation n qlhg pexternal line t
Internet Access
Deactivation n rlhg pexternal line t
KBA.book Seite 2 Freitag, 26. Januar 2007 9:34 09

3
Functions used when making calls
External line reservation
Busy
1Wait for wt
Phone rings.
npexternal s
or
2)Wait for (d) qil t
Phone rings.
npexternal s
Feature Code
System speed dialing nqk+ ddd.fhm s
Individual speed dialing nqk+ qd.qh s
Individual speed dialing
Programming nqmf+ qd.qhp
wait for wt
Speakerphone auto-answering
mode
Activation
nqmjwait wt
Speakerphone auto-answering
Mode
Deactivation
nrmjwait wt
Direct communication call qld pextension with a system telephone
wait for wsrecord message
Internal call npextension s
Calling a call group (CG) n kkd.kkms
Calling a Hunt Group (HG) n kld.klms
UCD subscriber group n kmd.kmms
Urgent Call
(busy extension)
1) np(busy) Wait ws
or
2) np(busy) (d) qil s
Hotline
(If programmed) ns
Warmline
(If programmed) nWait for s
Override
Busy extension npbusy (d)qjf s
LCR Bypass nqhi pCarrier + number s
Silent Monitoring
busy extension nqmhh pbusy extension s
Recall
Activation
(Extension does not answer or is busy)
1) npno answer (d) qilwt
Wait. Phone rings ns
or
2) Wait for wt
Wait. Phone rings ns
Callback
Deactivation nrilt
KBA.book Seite 3 Freitag, 26. Januar 2007 9:34 09

4
Functions used during calls
Functions used when receiving calls
Carrier nms
Using a temporary MSN to make a
Call nqhepMSN slot or MSN number
pexternal line pexternal number s
Feature Code
Account code nqjdpacc. code pnumber s
Conference s(d)ps(d)qgs
Consultation
(To end a consultation wait for replace-
ment of handset)
s(d)ps
Parking s(d)qij+ d.m t
Retrieving a parked
call nrij+ d.m s
Retrieving a parked external
call nqjg+ pline s
To g g l e
(Use after consultation, for answering
a second or urgent call)
s(d)qf s
Suffix Dialing
(Must be activated at each new call) sqig pdata
Retrieving a Call on Hold s(d)qd s(if busy or no answer)
or
s(d)s(for MF telephones if no answer)
Tr a n s fe r
(When an external analog line pro-
grammed as “Type of answering sig-
nal” or a digital line is being used, you
must wait for an answer before trans-
ferring the call. For transfers without
consultation, there is no need to wait
before answering)
Internal/External
s(d)pnumber ( s) t
Feature Code
Accessing your mailbox npVoice mail group s
Answering Call
waiting s(d)qii s
or
s(d)qf s
Group pickup nqiks
Individual pickup nqimpextension s
Call forwarding on an analog line:
Call forwarding to an external num-
ber nqeepexternal line t
Internal call forwarding nqeepextension, voice mail group,
Call group or Fax/DID t
KBA.book Seite 4 Freitag, 26. Januar 2007 9:34 09

5
Miscellaneous functions
Call forwarding
Deactivation nreet
Call forward no answer or busy
Activation nqehpextension, Voice mail group,
Call group or external line t
Call forward no answer or busy
Deactivation nreht
Do not disturb
Activation nqmkwt
Do not disturb
Deactivation nrmkwt
EVM:
Consultation at the extension being
used nkmdVM group ppassword s
Consultation from another exten-
sion nkmdVM group ppassword + extension
s
Consultation from an external
line spyour external number
qppassword + extension s
Feature Code
Entrance telephone
Door Opener s(d)qje
or
n(d)qje pextension
General alarm
Deactivation n rmheh ppassword t
Electronic lock password change n qmg pcurrent password pnew pass-
word p
confirm new password wt
Electronic lock
Activation n qjj ppassword wt
Electronic lock
Deactivation n rjj ppassword wt
Busy signal when extension is busy
Activation n qmhee wt
Busy signal when extension is busy
Deactivation n rmhee wt
System programming mode
Activation n qmi ppassword pcodes
Deactivating Features
(Call forwarding, do not disturb, head-
set, data protection, alarm clock, recall,
speakerphone auto-answering)
nrdwt
Language/Country settings n qmhef pcountry code t
Call Group (CG) and Hunt Group
(HG) Login n qli pspecific group t
or
n qli qall groups t
KBA.book Seite 5 Freitag, 26. Januar 2007 9:34 09

6
Alarm clock
Call Group (CG) and Hunt Group
(HG) Logout n rli pspecific group t
or
n rli rall groups t
Room monitor
(Babyphone) n qll ws
Music on Hold
Activation n qmhedMusic
Music on Hold
Deactivation n rmhed
or
t
Remote configuration
HiPath 1100 Manager n qmmf wt
Remote configuration
Using an MF telephone
1) The local programming extension is talking to the remote
programmer:
qmme wt
The remote programmer must provide:
ppassword pprogramming codes.
2) The remote programmer dials the system and is attended
by the Fax/DID feature:
qmi ppassword pProgramming codes.
Data protection
Activation n qhmd wt
Data protection
Deactivation n rhmd wt
Relay
Activation (only for HiPath 1120) n qmd t
Relay
Activation (only for HiPath 1120) n rmd t
Night service
Activation n qhh ppassword t
Night service
Deactivation n rhh ppassword t
Call Waiting tone
Activation nrlk wt
Call Waiting tone
Deactivation nqlk wt
COS (Class of service) Changeover n qidl pextension ppassword
s
Flash time detection for extensions n qmhej w+ dt
Feature Code
Alarm clock
(Daily) nqhjephour (e.g., 1230) t
Alarm clock
(Daily, except weekends) nqhjfphour (e.g., 1230) t
Alarm clock
(After a specified time period) nqhjgphour (e.g., 1230) t
KBA.book Seite 6 Freitag, 26. Januar 2007 9:34 09

7
UCD subscriber group functions
Satellite PABX
Special functions for ISDN lines
Alarm clock
(For a specified date and time) nqhjhpdate/time (e.g., 24121830)
t
Alarm clock
Deactivation nrhjt
Feature Code
Agent available n qhdf t
Agent unavailable n rhdf t
Calling a UCD subscriber group n kmd.kmms
Logging into a UCD subscriber
group n qhde
pgroup(if it belongs to more than one group) t
Logging out of a UCD subscriber
group n rhde t
UCD agent in service n qhdg t
UCD agent out of service n rhdg t
Feature Code
Flash on external analog line (d)qie
Operation as a Satellite PABX nlmd.lmmpnumber s
Feature Code
Immediate call forwarding for MSN
Activation n qjhe pexternal wp MSN t
Immediate call forwarding for MSN
Deactivation n rjhe wt
Call forwarding - no answer, for
MSN
Activation
n qjhf pexternal wpMSN t
Call forwarding - no answer, for
MSN
Deactivation
n rjhf wt
Call forwarding for MSN when the
line is busy
Activation
n qjhg pexternal wpMSN t
Call forwarding - Busy, for MSN
Deactivation n rjhg wt
Caller ID
(Trace) s(d)qlh s
Restriction for sending MSN
Activation n qlj t
KBA.book Seite 7 Freitag, 26. Januar 2007 9:34 09

8
Restriction for sending MSN
Deactivation n rlj t
Using features provided by
a carrier over an ISDN Network nqidgpexternal pISDN code t
Note 1:
For Korea the numbering plan changes as follows:
a) Access to the group of external lines is done with digit "9" instead of "0";
b) Calling an operator terminal is done with digit "0" instead of "9";
c) Group call pickup is done with sequence "*0" instead of "*57"
d) Recovery of a parked call is done with sequence "*57" instead of "*0";
Note 2:
Feature Codes can be changed with the HiPath 1100 Manager. An expert
should be consulted in this case.
KBA.book Seite 8 Freitag, 26. Januar 2007 9:34 09

The information provided in this document
contains merely general descriptions or char-
acteristics of performance which in case of
actual use do not always apply as described
or which may change as the result of further
development of the products.
An obligation to provide the respective char-
acteristics shall only exist if expressly agreed
in the terms of the contract.
All trademarks are the property of Siemens
Enterprise Communications GmbH & Co. KG
or their respective owners.
© Siemens Ltda.
Siemens Communications
Rua Pedro Gusso, 2635 • Curitiba-PR/BR
Ref. No: A31003-K1270-U105-2-7619
Subject to availability. Right of modification re-
served.
26.01.2007 V6.0
www.siemens.com/enterprise
KBA.book Seite 9 Freitag, 26. Januar 2007 9:34 09