Siemens SIMATIC NET SCALANCE W734-1 User manual

SIMATIC NET
Industrial Wireless LAN
SCALANCE W774-1 /W734-1
Operating Instructions
09/2017
C79000-G8976-C325-09
Introduction 1
Security recommendations 2
Description of the device 3
Mounting 4
Connection 5
Upkeep and maintenance 6
Technical data 7
Dimension drawings 8
Approvals 9

Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property
damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified
personnel are those who, based on their training and experience, are capable of identifying risks and avoiding
potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described.
Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in
this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
C79000-G8976-C325-09
Ⓟ 09/2017 Subject to change
Copyright © Siemens AG 2013 - 2017.
All rights reserved

Table of contents
1 Introduction...................................................................................................................................................5
1.1 Information on the Operating Instructions................................................................................5
2Security recommendations...........................................................................................................................7
3Description of the device............................................................................................................................11
3.1 Description of the device........................................................................................................11
3.2 Structure of the type designation...........................................................................................13
3.3 Components of the product....................................................................................................14
3.4 Accessories............................................................................................................................15
3.4.1 Flexible connecting cables and antennas..............................................................................18
3.4.1.1 Flexible connecting cables.....................................................................................................18
3.4.1.2 Antennas................................................................................................................................19
3.5 LED display............................................................................................................................22
3.6 Reset button...........................................................................................................................24
4 Mounting.....................................................................................................................................................27
4.1 Wall mounting........................................................................................................................28
4.2 Installing on an S7-300 standard rail......................................................................................30
4.3 Installing on an S7-1500 standard rail....................................................................................31
4.4 Installing on a DIN rail / removing..........................................................................................32
5 Connection.................................................................................................................................................35
5.1 Lightning protection, power supply and grounding.................................................................36
5.2 Power supply..........................................................................................................................39
5.3 Ethernet..................................................................................................................................42
5.4 Antenna connectors...............................................................................................................44
5.5 Replacing the PLUG (C-PLUG or KEY-PLUG)......................................................................46
5.6 Grounding..............................................................................................................................49
6 Upkeep and maintenance...........................................................................................................................51
6.1 Device configuration with PRESET-PLUG.............................................................................51
6.2 Downloading new firmware using TFTP without WBM and CLI.............................................54
6.3 Restoring the factory settings.................................................................................................55
7 Technical data............................................................................................................................................57
7.1 Technical specifications W774/W734 RJ-45..........................................................................57
7.2 Technical specifications W774 M12.......................................................................................60
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 3

8 Dimension drawings...................................................................................................................................63
9 Approvals....................................................................................................................................................65
Index...........................................................................................................................................................67
Table of contents
SCALANCE W774-1 /W734-1
4Operating Instructions, 09/2017, C79000-G8976-C325-09

Introduction 1
1.1 Information on the Operating Instructions
Validity of the Operating Instructions
These operating instructions cover the following products:
Article number of the
RoW version
Article number of the
US version
Article number of the IL
version
Access points
SCALANCE W774‑1
RJ-45
6GK5774-1FX00-0AA
0
6GK5774-1FX00-0AB
0
6GK5774-1FX00-0AC0
SCALANCE W774‑1 M12
EEC
6GK5774-1FY00-0TA
0
6GK5774-1FY00-0TB
0
-
Ethernet client module
SCALANCE W734-1
RJ-45
6GK5734-1FX00-0AA
0
6GK5734-1FX00-0AB
0
_
These operating instructions apply to the following software version:
● SCALANCE W774/W734 with firmware as of version 6.2
Purpose of the Operating Instructions
Based on the operating instructions, you will be able to install and connect up the SCALANCE
W774/W734 correctly. The configuration and the integration of the device in a WLAN are not
described in these instructions.
Documentation on the accompanying CD
You will find detailed information about configuration in the SCALANCE W700 configuration
manuals on the accompanying SIMATIC NET IWLAN CD under the file name:
PH_SCALANCE-W770-W730-WBM_76.pdf and PH_SCALANCE-W770-W730-CLI_76.pdf
Note
Make sure that you read the explanations and instructions in the readme.htm file
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 5

In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. firewalls and/or network segmentation) are
in place.
Additionally, Siemens’ guidance on appropriate security measures should be taken into
account. For additional information on industrial security measures that may be implemented,
please visit
Link (https://www.siemens.com/industrialsecurity)
Siemens’ products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are no longer
supported, and failure to apply the latest updates may increase customer’s exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
Link (https://www.siemens.com/industrialsecurity).
Trademarks
The following and possibly other names not identified by the registered trademark sign ® are
registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, RCoax
Introduction
1.1 Information on the Operating Instructions
SCALANCE W774-1 /W734-1
6Operating Instructions, 09/2017, C79000-G8976-C325-09

Security recommendations 2
To prevent unauthorized access, note the following security recommendations.
General
● You should make regular checks to make sure that the device meets these
recommendations and/or other security guidelines.
● Evaluate your plant as a whole in terms of security. Use a cell protection concept with
suitable products (https://www.industry.siemens.com/topics/global/en/industrial-security/
pages/default.aspx).
● When the internal and external network are disconnected, an attacker cannot access
internal data from the outside. Therefore operate the device only within a protected network
area.
● For communication via non-secure networks use additional devices with VPN functionality
to encrypt and authenticate the communication.
● Terminate management connections correctly (WBM. Telnet, SSH etc.).
Physical access
● Restrict physical access to the device to qualified personnel.
● The memory card or the PLUG (C-PLUG, KEY-PLUG, security PLUG) contains sensitive
data such as certificates, keys etc. that can be read out and modified.
Software (security functions)
● Keep the software up to date. Check regularly for security updates of the product.
You will find information on this on the Internet pages "Industrial Security (http://
www.siemens.com/industrialsecurity)"
● Inform yourself regularly about security advisories and bulletins published by Siemens
ProductCERT (http://www.siemens.com/cert/en/cert-security-advisories.htm).
● Only activate protocols that you really require to use the device.
● Use the security functions such as address translation with NAT (Network Address
Translation) or NAPT (Network Address Port Translation) to protect receiving ports from
access by third parties.
● Restrict access to the device with a firewall or rules in an access control list (ACL - Access
Control List).
● If RADIUS authentication is via remote access, make sure that the communication is within
the secured network area or is via a secure channel.
● The option of VLAN structuring provides good protection against DoS attacks and
unauthorized access. Check whether this is practical or useful in your environment.
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 7

● Enable logging functions. Use the central logging function to log changes and access
attempts centrally. Check the logging information regularly.
● Configure a Syslog server to forward all logs to a central location.
● Use WPA2/ WPA2-PSK with AES to protect the WLAN. If iPCF or iPCF-MC is used, use
the AES encryption.
Passwords
● Define rules for the use of devices and assignment of passwords.
● Regularly update passwords and keys to increase security.
● Change all default passwords for users before you operate the device.
● Only use passwords with a high password strength. Avoid weak passwords for example
password1, 123456789, abcdefgh.
● Make sure that all passwords are protected and inaccessible to unauthorized personnel.
● Do not use the same password for different users and systems or after it has expired.
Keys and certificates
This section deals with the security keys and certificates you require to set up HTTPS
( HyperText Transfer Protocol Secured Socket Layer).
● We strongly recommend that you create your own HTTPS certificates and make them
available.
There are preset certificates and keys on the device. The preset and automatically created
HTTPS certificates are self-signed.
We recommend that you use HTTPS certificates signed either by a reliable external or by
an internal certification authority. The HTTPS certificate checks the identity of the device
and controls the encrypted data exchange. You can install the HTTPS certificate via the
WBM (System > Load and Save).
● Handle user-defined private keys with great caution if you use user-defined SSH or SSL
keys.
● Use the certification authority including key revocation and management to sign the
certificates.
● Verify certificates and fingerprints on the server and client to avoid "man in the middle"
attacks.
● We recommend that you use certificates with a key length of 2048 bits.
● Change keys and certificates immediately, if there is a suspicion of compromise.
Secure/non-secure protocols
● For the DCP function, enable the "DCP read-only" mode after commissioning.
● Avoid and disable non-secure protocols, for example Telnet and TFTP. For historical
reasons, these protocols are still available, however not intended for secure applications.
Use non-secure protocols on the device with caution.
Security recommendations
SCALANCE W774-1 /W734-1
8Operating Instructions, 09/2017, C79000-G8976-C325-09

● The following protocols provide secure alternatives:
– SNMPv1/v2 → SNMPv3
Check whether use of SNMPv1 is necessary. SNMPv1 is classified as non-secure. Use
the option of preventing write access. The product provides you with suitable setting
options.
If SNMP is enabled, change the community names. If no unrestricted access is
necessary, restrict access with SNMP.
Use SNMPv3 in conjunction with passwords.
– HTTP → HTTPS
– Telnet → SSH
– SNTP → NTP
● Use secure protocols when access to the device is not prevented by physical protection
measures.
● To prevent unauthorized access to the device or network, take suitable protective measures
against non-secure protocols.
● If you require non-secure protocols and services, operate the device only within a protected
network area.
● Restrict the services and protocols available to the outside to a minimum.
Available protocols per port
The following list provides you with an overview of the open ports on this device.
The table includes the following columns:
●Protocol
All protocols that the device supports
●Port number
Port number assigned to the protocol
●Port status
– Open
The port is always open and cannot be closed.
– Open (when configured)
The port is open if it has been configured.
●Factory setting
– Open
The factory setting of the port is "Open".
– Closed
The factory setting of the port is "Closed".
●Authentication
Specifies whether or not the protocol is authenticated.
Security recommendations
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 9

Protocol Port number Port status Factory setting of the
port
Authentication
SSH TCP/22 Open (when config‐
ured)
Open Yes
TELNET TCP/23 Open (when config‐
ured)
Open Yes
HTTP TCP/80 Open (when config‐
ured)
Open Yes
HTTPS TCP/443 Open (when config‐
ured)
Open Yes
SNTP
NTP
UDP/123 Open (when config‐
ured)
Closed No
SNMP UDP/161 Open (when config‐
ured)
Open Yes
PROFINET UDP/34964,
UDP/49154,
49155
Open Open No
Syslog UDP/514 Open (when config‐
ured)
Open No
EtherNet/IP TCP/44818,
UDP/
2222,44818
Open (when config‐
ured)
Open No
DHCP UDP/67,68 Open (when config‐
ured)
Closed No
RADIUS UDP/
1812,1813
Open (when config‐
ured)
Closed No
TFTP UDP/69 Open (when config‐
ured)
Closed No
Security recommendations
SCALANCE W774-1 /W734-1
10 Operating Instructions, 09/2017, C79000-G8976-C325-09

Description of the device 3
3.1 Description of the device
W774-1 /W734-1 RJ-45

①Antenna connector R1A1
②PLUG slot / RESET button
③Antenna connector R1A2
④LEDs
⑤Ethernet connector P2 (PoE capability)
⑥Ethernet connector P1
⑦Connector for power supply (L1, L2)
⑧Eye for grounding (diameter 4.5 mm) / wall mounting
Figure 3-1 Device description of the RJ-45 variant
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 11

W774-1 /W734-1 M12

①Antenna connector R1A1
②PLUG slot / RESET button
③Antenna connector R1A2
④LEDs
⑤Ethernet connector P2 (PoE capability)
⑥Ethernet connector P1
⑦Connector for power supply (L1, L2)
⑧Eye for grounding (diameter 4.5 mm) / wall mounting
Figure 3-2 Device description of the M12 variant
Description of the device
3.1 Description of the device
SCALANCE W774-1 /W734-1
12 Operating Instructions, 09/2017, C79000-G8976-C325-09

3.2 Structure of the type designation
The type designation of the device is made up of several parts that have the following meaning:
06RFNHW1XPEHURI:/$1LQWHUIDFHV5-6RFNHW:$FFHVV3RLQW&OLHQW((&(QKDQFHG(QYLURQPHQWDO&RQGLWLRQ,3,3
Description of the device
3.2 Structure of the type designation
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 13

3.3 Components of the product
The following components are supplied with the product:
● SCALANCE W774 or SCALANCE W734
● 2 protective caps for the antenna sockets
● Only with device variant M12
– 3 protective caps for the M12 sockets
● Only with device variant RJ-45:
– 4-pin terminal block for the power supply
● 1 screw for mounting on an S7-300 standard rail or S7-1500 standard rail
● SIMATIC NET Industrial Wireless LAN CD
Please check that the consignment you have received is complete. If the consignment is
incomplete, contact your supplier or your local Siemens office.
Description of the device
3.3 Components of the product
SCALANCE W774-1 /W734-1
14 Operating Instructions, 09/2017, C79000-G8976-C325-09

3.4 Accessories
Technical data subject to change.
You will find further information on the accessories program in the Industry Mall. (https://
mall.industry.siemens.com)
PLUG
Component Description Article number
C-PLUG Configuration PLUG,
Exchangeable storage medium (32 MB) for the configuration
data
6GK1900-0AB00
KEY-PLUG
features
Enabling of iFeatures and exchangeable storage medium for
storage of configuration data
KEY-PLUG W780 iFeatures AP 6GK5907-8PA00
KEY-PLUG W740 iFeatures Client 6GK5907-4PA00
KEY-PLUG
W700 Security
W700 Security
Enabling of “Inter AP Blocking” and exchangeable storage me‐
dium for storage of configuration data
6GK5907-0PA00
M12 data plug-in connector
Component Description Article number
IE FC M12 PLUG
PRO 2x2
M12 data plug-in connector for IE FC TP ca‐
bles 2x2, IP65/67, D-coded, axial cable outlet
1 connector per package 6GK1901-0DB20-6AA0
8 connectors per package 6GK1901-0DB20-6AA8
Cables Industrial Ethernet
Component Description Article number
IE FC TP STANDARD CA‐
BLE GP2X2
(PROFINET type A)
Standard bus cable, TP installation cable for con‐
nection to FC OUTLET RJ-45, for universal use, 4-
wire, shielded, CAT 5E
Sold by the meter
6XV1840-2AH10
IE FC TP ROBUST
STANDARD CABLE GP
2X2
(PROFINET type A)
Standard bus cable, ATPE outer jacket for connec‐
tion to FC RJ-45 PLUG and FC OUTLET RJ-45,
fixed installation, for universal use, 4-wire, shielded,
CAT 5
Sold by the meter
6XV1841-2A
IE FC TP ROBUST FLEXI‐
BLE CABLE GP 2X2
(PROFINET type B)
Flexible bus cable, TPE outer jacket for connection
to FC RJ-45 PLUG and FC OUTLET RJ-45, flexible
wires, 4-wire, shielded, CAT 5
Sold by the meter
6XV1841-2B
IE FC TP FLEXIBLE CA‐
BLE GP 2X2
(PROFINET type B)
Flexible bus cable, TP installation cable, flexible
wires, shielded, CAT 5
Sold by the meter
6XV1870-2B
Description of the device
3.4 Accessories
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 15

Component Description Article number
IE FC TP TRAILING CA‐
BLE 2X2
(PROFINET type C)
Highly flexible bus cable, TP installation cable for
connection to FC OUTLET RJ-45, for use in drag
chains, 4-wire, shielded, CAT 5
Sold by the meter
6XV1840-3AH10
IE TP TORSION CABLE
2X2
(PROFINET type C)
Highly flexible bus cable, TP installation cable for
use in highly flexible applications (torsion), 4-wire
Sold by the meter
6XV1870-2F
IE CONNECTING CABLE
M12-180/IE RJ45
Flexible IE connecting cable, 4-wire, preassembled
with a 4-pin M12 plug (D-coded) and an IE FC
RJ-45 plug 145
6XV1871-5T*
IE CONNECTING CABLE
M12-180/M12-180
Flexible IE connecting cable, 4-wire, preassembled
with two 4-pin M12 plugs (D-coded)
6XV1870-8A*
* Available in different lengths
Cabinet feedthrough
Component Description Article number
IE M12 PANEL
FEEDTHROUGH
Cabinet feedthrough for conversion from M12 connector
technology (D-coded, IP65) to RJ-45 connector technolo‐
gy (IP20)
pack of 5
6GK1901-0DM20-2
AA5
IE M12 PANEL
FEEDTHROUGH
PRO
Cabinet feedthrough for conversion from M12 connector
technology (D-coded, IP65) to M12 connector technology
(D-coded, IP65)
pack of 5
6GK1901-0DM30-2
AA5
IE M12 PANEL
FEEDTHROUGH
4X2
Cabinet feedthrough for conversion from M12 connector
technology (X-coded, IP65/67) to RJ-45 connector tech‐
nology (X-coded, IP20)
pack of 5
6GK1901-0DM40-2
AA5
N-Connect/N-Con‐
nect female/female
Panel Feedthrough
Panel feedthrough for wall thicknesses up to a maximum
of 4.5 mm, two N-Connect female connectors.
6GK5798-2PP00-2
AA6
N-Connect/SMA-
Connect female/fe‐
male Panel Feed‐
through
Panel feedthrough for wall thicknesses up to a maximum
of 5.5 mm, two N-Connect/SMA female connectors.
6GK5798-0PT00-2
AA6
Description of the device
3.4 Accessories
SCALANCE W774-1 /W734-1
16 Operating Instructions, 09/2017, C79000-G8976-C325-09

Energy cable
Component Description Article number
Energy cable 2
x 0.75
Energy cable for connection of signaling contact and power
supply 24 VDC, stranded wire 2 x 0.75 mm2, capable of trailing,
not assembled
Sold by the meter
6XV1812-8A
Robust Energy
Cable 4 x 0.75
Energy cable for connection of power supply 24 VDC, 4-wire
stranded 4 x 0.75 mm2, robust, flexible, not assembled
Sold by the meter
6XV1801-2A
M12 PLUG-IN
CABLE
Flexible plug-in power cable to connect the power supply 24
VDC, 4-wire, preassembled with a 4-pin M12 plug and an M12
socket (A-coded)
6XV1801-5D*
* Available in different lengths
Socket
Component Description Article number
IE POWER M12 CA‐
BLE CONNECTOR
PRO
Socket for the 24 VDC power supply. 4-pin, A-coded
pack of 3
6GK1907-0DC10-6A
A3
Lightning protection
Component Description Article number
LP798‑1N Lighting protector with N/N female/female connector with gas dis‐
charge technology
6GK5798-2LP00-2
AA6
LP798‑2N Lighting protector with N/N female/female connector with quarter
wave technology
6GK5798-2LP10-2
AA6
Terminating resistor
Component Description Article number
TI795-1N Electrical connection
N-Connect, male
6GK5795-1TN00-1
AA0
Description of the device
3.4 Accessories
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 17

3.4.1 Flexible connecting cables and antennas
3.4.1.1 Flexible connecting cables
Flexible connecting cable N-Connect/R-SMA
Flexible connecting cable for connecting an antenna to a SCALANCE W700 with R-SMA
connectors, preassembled with a connector N-male and R-SMA male
Length Article number
0.3 m 6XV1875-5CE30
1 m 6XV1875-5CH10
2 m 6XV1875-5CH20
5 m 6XV1875-5CH50
10 m 6XV1875-5CN10
For railway applications, the following connecting cable are available:
Length Article number
1 m 6XV1875-5TH10
2 m 6XV1875-5TH20
5 m 6XV1875-5TH50
Flexible connecting cable N-Connect/N-Connect
Flexible connecting cable for connecting an antenna to a SCALANCE W700 with N-Connect
connectors.
Preassembled with two N male connectors:
Length Article number
1 m 6XV1875-5AH10
2 m 6XV1875-5AH20
5 m 6XV1875-5AH50
10 m 6XV1875-5AN10
For railway applications, the following connecting cable are available:
Length Article number
1 m 6XV1875-5SH10
2 m 6XV1875-5SH20
5 m 6XV1875-5SH50
Description of the device
3.4 Accessories
SCALANCE W774-1 /W734-1
18 Operating Instructions, 09/2017, C79000-G8976-C325-09

Flexible connecting cable IWLAN QMA/N-Connect male/female
Adapter cable for connecting a MIMO antenna with QMA connectors with the flexible
connecting cables. Preassembled with two connectors QMA male and N-Connect female. pack
of 3
Length Article number
1 m 6XV1875-5JH10
For railway applications, the following connecting cable is available Note: Scope of delivery:
Pack of 1
Length Article number
1 m 6XV1875-5VH10
3.4.1.2 Antennas
Note
When you select an antenna, keep in mind the national approvals for your device.
You will find more information in the following Link (http://www.siemens.com/wireless-
approvals)
Type Properties Article number
ANT792-4DN RCoax helical antenna, circular po‐
larization, 4 dBi, 2.4 GHz, N-Con‐
nect female.
6GK5792-4DN00-0AA6
ANT792-6MN Omni antenna, mast/wall mounting,
6 dBi 2.4 GHz, N-Connect female
6GK5792-6MN00-0AA6
ANT792-8DN Directional antenna, mast/wall
mounting, 14 dBi 2.4 GHz, N-Con‐
nect female
6GK5792-8DN00-0AA6
ANT793-4MN RCoax λ5/8 antenna with vertical
polarization, 6 dBi, 5 GHz, N-Con‐
nect female.
6GK5793-4MN00-0AA6
ANT793-6DG Wide angle antenna, mast/wall
mounting, 9 dBi 5 GHz, 2 x N-Con‐
nect female
6GK5793-6DG00-0AA0
ANT793-6DT Wide angle antenna (MIMO), mast/
wall mounting, 8 dBi 5 GHz, 3 x
QMA connector female
6GK5793-6DT00-0AA0
ANT793-6MN Omni antenna, mast/wall mounting,
5 dBi 5 GHz, N-Connect female
6GK5793-6MN00-0AA6
ANT793-8DJ Directional antenna, mast/wall
mounting, 18 dBi 5 GHz, 2 x N-Con‐
nect female
6GK5793-8DJ00-0AA0
ANT793-8DK Directional antenna, mast/wall
mounting, 23 dBi 5 GHz, 2 x N-Con‐
nect female
6GK5793-8DK00-0AA0
Description of the device
3.4 Accessories
SCALANCE W774-1 /W734-1
Operating Instructions, 09/2017, C79000-G8976-C325-09 19

Type Properties Article number
ANT795-4MA Omni antenna, directly on the de‐
vice, 3/5 dBi 2.4 GHz and 5 GHz,
IP30, R-SMA connector male for di‐
rect mounting on the device, con‐
nector angle adjustable 0° to 180°.
6GK5795-4MA00-0AA3
ANT795-4MC Omnidirectional antenna, 3/5 dBi,
2.4 GHz and 5 GHz, IP65, N-Con‐
nect male for direct installation on
the device, straight connector.
6GK5795-4MC00-0AA3
ANT795-4MD Omnidirectional antenna, 3/5 dBi,
2.4 GHz and 5 GHz, IP65, N-Con‐
nect male for direct installation on
the device, 90° connector.
6GK5795-4MD00-0AA3
ANT795-6DC Wide angle antenna, mast/wall
mounting, 9 dBi 2.4 GHz and 5 GHz,
N-Connect female
6GK5795-6DC00-0AA0
ANT795-4MB Omnidirectional antenna, 2/3 dBi
2.4 GHz and 5 GHz, IP30, R-SMA
connector female for direct mount‐
ing on the device, connector angle
adjustable 0° to 90°.
6GK5795-4MB00-0Ax0
ANT795-6MN Omni antenna, mounted on roof/ve‐
hicle, 6/8 dBi 2.4 GHz and 5 GHz,
N-Connect female
6GK5795-6MN10-0AA6
ANT795-6MT Omni antenna (MIMO), mounted on
roof/vehicle/ceiling, 5/7 dBi 2.4 GHz
and 5 GHz, 3 x QMA connector fe‐
male
6GK5795-6MT00-0AA0
ANT793-8DL Directional antenna vertical-hori‐
zontal polarized, 5 GHz, 14dBi,
IP66, 2xN-Connect female
6GK5793-8DL00-0AA0
ANT793-8DP Directional antenna, mast/wall
mounting, 13 / 13.5 dBi 4.9 GHz and
5 GHz, N-Connect female
6GK5793-8DP00-0AA0
ANT795-4MX Omnidirectional antenna, 2/2,5 dBi,
2.4 GHz and 5 GHz, IP69K, N-Con‐
nect male
6GK5795-4MX00-0AA0
ANT795-6MP Omnidirectional antenna, 5/7 dBi,
2.4 GHz and 5 GHz, IP65/67, N-
Connect female
6GK5795-6MP00-0AA0
ANT896-6MM Omnidirectional antenna for mobile
wireless, WLAN and GPS, WLAN:
6/7 dBi, 2.4 GHz and 5 GHz, IP68,
IP69 K, QMA-Connect female, port
2
6GK5896-6MM00-0AA0
IWLAN RCoax Cable
2,4 GHz PE 1/2"
Omni antenna, 0 dBi 2.400 - 2.485
GHz, N-Connect female.
6XV1875-2A
IWLAN RCoax Cable 5
GHz PE 1/2"
Omni antenna, 0 dBi 5.150 – 5.875
GHz, N-Connect female.
6XV1875-2D
Description of the device
3.4 Accessories
SCALANCE W774-1 /W734-1
20 Operating Instructions, 09/2017, C79000-G8976-C325-09