SIGNIFY LEDALITE NatureConnect 912401564422 User manual

NatureConnect
Natural lighting system
February 2023
Installation guide
North America

Order of installation
2NatureConnect - Installation guide - February 2023
1. Control cabinet ..................... 4
3. Large Island frame ................ 20 4. Small Island frame ................. 30
6. Daylights ............................... 45
2. Lightscapes .......................... 9
5. Skylights & Gear tray ............ 38
7. Test installation ..................... 62

Preparation, Sensors & User interface
3NatureConnect - Installation guide - February 2023
AC MAINS
Daylights
Island
Skylights
Lightscapes
Cabinet Island gear tray
DMX
Ethernet
0-10 V
Standalone
Daylights
To next island
AC MAINS
Lighting
control
system

4NatureConnect - Installation guide - February 2023
1
2
Unpack cabinet and materials
Mount cabinet to a wall
Don't change or damage the
wiring inside the cabinet
• Network cable Cat5e: Straight-through T-568B (for Lightscape)
• Mounting material cabinet
• 20AWG or better solid core copper cable for DALI connection to island
1x
Leave enough free area for cables
above and to the right of the cabinet
6 in
[15 cm]
6 in
[15 cm]
1x
Use instructions that are
included with the cabinet

5NatureConnect - Installation guide - February 2023
D-
D+
D-
D+
GND
N
L
GND
N
L
GND Green
N White
L Black
DALI+ Purple
DALI- Brown
3
4
Prepare DMX512 connection to Lightscape
Prepare Dali connection to Island
Straight-through
T-568B
20 AWG or better
Content group 1
Content group 2
Content group #
Lightscape
controller
DMX512
DMX512 CG #
DMX512 CG 2
DMX512 CG 1
Content group 1
Content group 2
Content group #
CG# CG#
DALI
DALI
D+ D-
The DALI connection block is yellow and gray
Terminal block
inside cabinet

5
6
Ethernet Lighting control connection (not applicable
for 0-10 V)
0-10 V Lighting control connection (not applicable for
Ethernet)
6NatureConnect - Installation guide - February 2023
BRI
CG#
0-10V 0-10V
SCENE
NEUT
GND
CG#
+24V
234 5
1
Label Color Description
1BRI Blue Brightness 0-10V positive
2CG# Gray Brightness 0-10V negative
3SCENE Blue Scene select 0-10V positive
4CG# Gray Scene select 0-10V negative
5+24V Orange +24V (do not connect)
A cabinet uses either this 0-10V lighting control connection, or it
uses an Ethernet lighting control connetion. Refer to the lighting
plan to see which one applies.
Ethernet connection to lighting control system
Ethernet internal
A cabinet uses either this Ethernet lighting control connection, or it
uses a 0-10V lighting control connetion. Refer to the lighting plan to
see which one applies.
When using a Dynalite lighting control system, connect the Ethernet
internal port to the network port of a Dynalite PDEG.
Terminal block
inside cabinet

7Connect network up-link and mains
8Check status LEDS in the cabinet
7NatureConnect - Installation guide - February 2023
LOXONE Miniserver
DALI
DALI 1
DALI
DALI 2
DALI
DALI 3
DALI
DALI 4
DALI
DALI 5
DMX
DMX 1
DMX
DMX 2
DMX
DMX 3
DMX
DMX 4
Static blue
LED = OK
Blinking green LED = Mini-server OK
Internet
connection
Mains
power
120 V
Internet
Condition Module LED status Recommendation
Green blinking Module works correct
Orange /Red led
Orange / Red led Issue in cabinet. Call support
Green blinking Module works correct
Dali/DMX cable
connected
Dali/DMX cable
not connected
Issue in installation. Try
disconnecting the cable
AI
LINE
NEUT
AC
AC
GND
Mains
connection
block

9Configure the timezone into the control cabinet
8NatureConnect - Installation guide - February 2023
Download the NatureConnect Cabinet Configuration Tool:
http://downloads.natureconnect.cloud

Lightscape
9NatureConnect - Installation guide - February 2023
Lightscape 1 Lightscape 2
Trunking plate
Data cable
Mounting Assembly
Locking Plate

2Prepare cable connections
1Unpack and check Lightscape
13
10 NatureConnect - Installation guide - February 2023
1/4-20 x 3/4"
10-24 x 1/2"
10-24
1x
1x
2x
1x 1x
2x
2x
1x
2X
Lightscape 1 Lightscape 2 Lightscape 3
4G AWG12
Lightscape controller
1/4-20
2x
3/8
5/16
2x
8-B x 9/32"
PH2
2x
Tools not included
1x

3
4
Define distance from wall and floor
Single Lightscape or multiple connected Lightscapes
5
10
1 Lightscape
2 or more connected Lightscapes
11 NatureConnect - Installation guide - February 2023
21 15⁄16 in
[557 mm]
5 15/16 in
[150 mm]
19 11⁄16 in
[500 mm]
B
A
A
B
B > 1 3/163/16 in
[30 mm]

5
6
Define suspension points
Prepare suspension
12 NatureConnect - Installation guide - February 2023
49 ⅛ in
[1248 mm]

7
8
Mount Lightscape to suspension
Tighten upper nuts on both ends
13 NatureConnect - Installation guide - February 2023
X X
1
2
3
Secure mounting assembly with locking plate
19 in-lbs

9
10
Connect cables
Multiple Lightscapes: Define suspension points
19
14 NatureConnect - Installation guide - February 2023
1
..
53 3/16 in
[1351 mm]
Data Enabler Pro
53 3/16in
[1351 mm]
49 ⅛ in
[1248 mm]
NGL
Data

11
Mount first Lightscape to the suspension points
15 NatureConnect - Installation guide - February 2023
12
Prepare suspension points
1
2
3
Mounting Trunking Plate to end of Lightscape with incoming power
< 60 in-lbs

14
Tighten upper bolts on both ends
13
Attach second Lightscape
16 NatureConnect - Installation guide - February 2023
1
2
3
Mount First Lightscape, secure Safety Brackets and place the adhesive
gasket in the Trunking Plate side
4
Mount Second Lightscape with Trunking Plate

15
Tighten upper bolts on both ends
17 NatureConnect - Installation guide - February 2023
Fix sides together
#10
Secure trunking plate by tightening bolt and secure other end of
supsension cable with saftey bracket
15
16
< 60 in-lbs
30 in-lbs

16
17
Repeat step 12 and 13 to add more Lightscapes
Connect all cables
18 NatureConnect - Installation guide - February 2023
12...
Lightscape controller
17
18
Repeat steps 12 thru 16 to add additional Lightscapes

18 Add end-cap to last Lightscape
19 NatureConnect - Installation guide - February 2023
19 Add end-cap to first and last Lightscapes

Large Island frame
20 NatureConnect - Installation guide - February 2023
Corner brackets
Island trim: Long side
Island trim: Short side
Inner frame: Main bars
Inner frame: Cross bars
Trim Adapters (recessed frame only)