SIGNIFY Trulifi 6016 User manual

4422-957-19938_580_A- Trulifi 6016 Quick Start Guide
1. Introduction
The Trulifi 6016 may be regularly updated with new
documentation, firmware, and product updates.
To view and download the latest documentation, technical
specifications, installation instructions, user manuals and firmware
updates please scan the QR-code in this document or go to:
https://www.signify.com/global/innovation/trulifi/downloads
2. Compliance statement
•This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
•Class B Consumer information:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician
for help.
•For Canada only: Innovation, Science, and Economic
Development Canada ICES -003 Compliance label: CAN ICES-3
(B)/NMB-3(B)
A full list of compliances and supported standards can be found in
the product specification sheet, which can be downloaded
from:
https://www.signify.com/global/innovation/trulifi/downloads
3. Flight case assembly
The Trulifi 6016 may be provided with an optional Flight Case.
Assembly instructions can be found in the user manual and on the
reverse side of this page.
3.1 How to pack/transport the Trulifi 6016
On the next page it is visualized how the Trulifi 6016 can best be
stored in the flight case.
Trulifi documentation
Trulifi 6016 Quick Start Guide

© 2023 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify
does not give any representation or warranty as to the accuracy or completeness of the information included herein and
shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. All trademarks
are owned by Signify Holding or their respective owners.
4422-957-19938_580-Trulifi 6016 Quick Start Guide
To best fit the Trulifi 6016 and its accessories into the flight case,
follow the steps below:
- Detach the Trulifi 6016 from the tripod mount.
- Ensure that the handle bar is mounted in the position intended for
the right-handed users, as represented in the picture below.
- Rotate the tripod mount until the handle bar is positioned on the
right side of the tripod leg with the logo.
- Place the handle bar as close as possible to the tripod legs.
- Retract and close the tripod legs and, for added safety, use the
quick clamp to lock the 3 legs of the tripod before storing it in the
flight case.
The final arrangement of the two sets of Trulifi 6016 and its acces-
sories in the flight case can be consulted in the picture below.
Tripod
quick clamp
Trulifi
6016
Handle bar
Tripod mount
Tripod logo