SIIG CE-H23J11-S1 User manual

HDMI 2.0 4-Display
Video Wall Processor
User Manual
04-1141A P/N: CE-H23J11-S1

2
Safety and Notice
The HDMI 2.0 4-Display Video Wall Processor has been tested for
conformance to safety regulations and requirements, and has been
certified for international use. However, like all electronic equipment,
the HDMI 2.0 4-Display Video Wall Processor should be used with
care. Please read and follow the safety instructions to protect yourself
from possible injury and to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where
explained in this manual.
• Provide proper ventilation and air circulation and do not use near
water.
• Keep objects that might damage the device and assure that the
placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection
cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit.
• Always unplug the power to the device before cleaning.
Thank You
for your purchase!

3
Features
• DisplayPort 1.2a & HDMI 2.0a compliant
• HDCP compliant
• Four HDMI outputs from 640x480 to 1920x1200
• Supports HDMI and DisplayPort input from 640x480 to 4K2K@60
(YUV 4:4:4), interlaced or progressive
• Image parameters and layouts are automatically saved in ash
memory of the device and can be recalled for later use
• Several image parameters and layouts can be saved in computers
and can be loaded for later use
• Firmware upgradable for new features and technology
enhancements
• The video wall processor can control by USB, push button,Ethernet,
IR remote control and cloud control
• Cloud support is thru an encrypted communication to provide the
best private protection when using device
• Resize, position, zoom for each HDMI output video
• User-selectable output settings, up to 1920x1200
• Supports remote control to switch 1x1, 2x2, 1x3 rotate, and 1x4
rotate mode
• Supports independent input rotation at the resolution up to 1080p
• 4K2K60 (YUV 4:4:4) can be divided and displayed onto four 1080p60
TV (2x2 layout only)
• Supports individual propagation delay on each display to have the
best visual perception
Package contents
• HDMI 2.0 4-Display Video Wall Processor
• Power adapter DC 12V / 1A
• IR Remote control
• Rack-mounting ear set
• User Manual

4
SPECIFICATIONS
Technical
Role of usage Video Wall Processor
HDCP compliance Yes
Video bandwidth Input – Single link 600MHz [18Gbps]
Output –Single-link 225MHz [6.75Gbps]
Video support Input - 4K2K@60 (4:2:2 8bits) / 4K2K@60 (4:4:4 8bits)
Output – 1920x1080@60 / 1920x1200@60
Video Format Support HDMI / DisplayPort
Audio support PCM 2ch
ESD protection Human body model — ±15kV [air-gap discharge]
& ±8kV [contact discharge]
Input 1x HDMI + 1x DisplayPort + 1x USB + 1xRJ45
Output 4x HDMI + 1x Stereo
Control IR remote control / Ethernet / USB / Front Panel / Cloud Control
Input TMDS signal 1.2 Volts [peak-to-peak]
HDMI connector Type A [19-pin female]
Mini-USB connector Type A
RJ-45 connector WE/SS 8P8C
Mechanical
Enclosure Metal case
Dimensions
(L x W x H)
Model 290 x 180 x 44mm [11.4" x 7" x 1.7"]
Package 376 x 240 x 112mm [1'2" x 9.4" x 4.4"]
Carton 590 x 510 x 405mm [1'9" x 1'7" x 1'3"]
Weight Model 1427g [3.2lbs]
Package 2077g [4.6lbs]
Fixedness 1U rack-mount with ears and Wall hanging holes
Power supply 12V DC
Power Consumption 12W
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]

5
Layout
Front Panel
1. LED indicator:
PWR – Power indicator LED
LOCK – When device status is locked, it will shine
4K – If source resolution is 4K, the LED indicator will shine
Source – When source from HDMI, the LED indicator will shine
Source from DisplayPort, the LED indicator will blink
2. IR SENSOR: IR sensor for receiving the IR commands from IR remote
3. Control buttons:
Button 1 (Source) – Source setting (HDMI or DisplayPort)
Button 2 (LOCK) – Press button for 3 seconds will enable/disable device locked
Button 3 (2x2) – Fast switch to 1x1 and 2x2
Button 4 (+90°) – Fast switch to 3x1 90° and 4x1 90°
Button 5 (-90°) – Fast switch to 3x1 -90° and 4x1 -90°
Button 6 (Preset 1)
Button 7 (Preset 2)

6
Rear Panel
SUPPORTED RESOLUTION
Input resolution Output resolution
720x480@60Hz
720x576@50Hz
1280x720@60Hz
1920x1080@30Hz
1920x1080@60Hz
4K2K@30Hz
4K2K@60Hz (4:2:2 8bits)
4K2K@60Hz (4:4:4 8bits)
640x480@60Hz
720x480@60Hz
720x576@60Hz
800x600@60Hz
1024x768@60Hz
1280x720@60Hz
1280x768@60Hz
1280x960@60Hz
1280x1024@60Hz
1366x768@60Hz
1440x900@60Hz
1600x1200@60Hz
1680x1050@60Hz
1920x1080@60Hz
1920x1200@60Hz
4. Power Switch: Power ON/OFF switch
5. +12V DC: 12V DC power jack
6. Dip Switch: On for normal use
Off for F/W upgrade
7. USB virtual COM
8. Ethernet: Ethernet control port
9. Stereo audio output – L
10. Stereo audio output – R
11. HDMI INPUT
12. DisplayPort INPUT
13. Output 1-4: HDMI outputs

7
Application
Operation Approach
Method A: Software Operation
System Requirement and Precautions
1. Whenever power o HDMI 2.0 4-Display Video Wall Processor,
please stay unpowered at least 5 to 10 seconds to allow power
capacitors to discharge.
2. The HDMI 2.0 4-Display Video Wall Processor provides software
control program which runs under Microsoft Windows 7, 8.1, 10
through the interface of USB virtual com control.
3. Before you click on the icon of the software, make sure you have
secured the connection between your computer USB port and
the HDMI 2.0 4-Display Video Wall Processor.

8
Start the software control program
Executing the control software, the following dialog will pop up. It
has two ways to control the HDMI 2.0 4-Display Video Wall Processor
device (under Microsoft Windows 7, please run as administrator).
1. USB Connection: Use USB to connect the port on device and
computer. Select correct virtual COM port and click the OK button.
2. Ethernet Connection: Enter the device IP address and click the
OK button.
After the software control setting is accomplished, it will enter
directly to the control interface.

9
1. Connection Status:
Show the connect information and status. If you use USB control
Mode to connect device, the graph is . For IP control, the
graph of Ethernet is
2. Quick Selection:
*Quick Selection function is not available when the input resolution is 4K2K@60Hz
In this part, you can set up the screen resolution, screen coordinate and
split screen. Firstly, you should select the TV picture and you can set up the
corresponding function. The dierent colors of frame represent the dierent
output TVs. The information of coordinate shows the position of output TV.
We also provides 8 preset spaces to save the frequently used scenarios into
the device
Rotation: *only at input is 1080p resolution
Use the software for independent rotation for each input. You can
select clockwise or counterclockwise to rotate the screen.

10
Output Selection and Resolution:
(1)Step 1: check input resolution and choose output resolution
Set the output resolution. You can choose the design display icon
to select the output port and setup resolution. When setting the
dierent resolution, the coordinate of output will also be changed.
In this part, you also can select input source (HDMI or DisplayPort)
or lock/unlock the device.
*Note that when you select the Synchronize function, all windows need to
be set up at the same resolution, otherwise the output will be abnormal.
*If you lock the device, only factory reset function can work.
(2) Step 2: output setting
It has three modes to set up the output TV resolution, position, size
and split screen. The details of dierent mode are described in step
2-1, 2-2 and 2-3.
*Note that when you want to change to another mode, you need to go back to the step 2.
1.Quick Selection 2.From le 3.Custom dene