SIIG CE-SD0C11-S1 User manual

4Kx2K 12G-SDI
Pattern Generator
User Manual
04-1200A P/N: CE-SD0C11-S1

2
Safety and Notice
The 4Kx2K 12G-SDI Pattern Generator has been tested for conformance
to safety regulations and requirements, and has been certified for
international use. However, like all electronic equipment, the 4Kx2K
12G-SDI Pattern Generator should be used with care. Please read and
follow the safety instructions to protect yourself from possible injury
and to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where
explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the
placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection
cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit.
• Always unplug the power to the device before cleaning.
Package contents
• 4Kx2K 12G-SDI Pattern Generator
• Power adapter DC 12V / 2A
• User Manual

3
Features
• Supported output resolution
NTSC 525@60, PAL 625@50, [email protected], 720p@50,[email protected],
720p@60, 1080i@50, [email protected], 1080i@60, [email protected],
1080p@24, 1080p@25, [email protected], 1080p@30, 1080p@50,
[email protected], 1080p@60, [email protected], 4K2K @24, 4K2K @25,
4K2K @29.97, 4K2K @30, 4K2K @50, 4K2K @59.94, 4K2K @60
• Bit Rate:
2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps,
5.94Gbps, 5.934Gbps, 11.88Gbps, 11.868Gbps,
• Video Patterns
100% Color Bars, Borderline, Random Noise, Check Field, Black,
 VerticalLines,Black/Whitealternateelds,FullGrey/Full 
White,Black to White Gradient, Random Generator for all still
 patterns,movingsquaresWhitenoise,Inverseeectwithstill 
pattern, Scrolling Title (see Appendix for illustrations)
• Save Settings to Memory Option
• ANC Data
EDH (RP-165), SMPTE 352M, SMPTE291M
• Control By panel buttons
• Video Output
SDI output (SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI)
Thank You
for your purchase!

4
SPECIFICATIONS

5
Layout
1. Power LED
2. SDI Output:
Connect to a SDI device for SDI signal output either from the
chosen pattern or the SDI source signal
3. Mini USB port: For F/W update
4. Power Input: Connect to a DC 12V power supply unit
5. SDI Input: Connect to a SDI source
PUSH Button
Button Function
Menu Trigger the menu operation
Enter Enter the menu item
Up Choose the last menu item
Down Choose the next menu item

6
Application

7
NOTICE
1. In HDMI bypass mode, users must be aware of that the jitters
coming from HDMI sources, such as DVD players, may be much
higher than typical requirement according to SMPTE request on
HD-SDI signals. This will result in SDI output with high jitters or
even no SDI outputs!
2. Due to the high frequency bandwidth and low jitter requirement
of 3G-SDI signals, it is strongly recommended to use just one SDI
OUTPUT with one 75 ohm.
3. The features including new timings and patterns may increase
 withoutnoticeafterthermwareisupdated!Thismayaectthe
menu items, but will keep the same framework for users!
APPENDIX
•  DataIdenticationWordofAncillaryDataPacket
* Data Type 1(SMPTE-291M)
ANC Data DID SDID/DBN
352M 0x41 0x01
RP-165-EDH* 0xF4 0x00

8
Dec, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.
Support
For more info or tech support
http://www.siig.com/support