Silhouette CAMEO User manual

Getting started with your
®

Getting Started with Silhouette CAMEO®
Connecting your Silhouette CAMEO®
Silhouette CAMEO®
electronic cutting tool
Silhouette Studio‰
software
crosscut blade
A/C adapter and
power cable
12” cutting mat
USB cable
blade with
ratchet cap
1
remove foam
1
Check Included Items
The Silhouette CAMEO® comes with the items shown in the following list. Check that all the
items have been included before starting. If you are missing any items listed below, please contact
[email protected].
Take the Silhouette CAMEO® from the box and remove the three strips of packing tape and foam support
as indicated by the following diagrams. These strips of tape and foam are used to hold the moving parts of
the Silhouette in place during shipment.
remove tape

Getting Started with Silhouette CAMEO®
1
2
3
2
2
Install the Silhouette Studio‰Software
PC Installation
1. Insert the included Silhouette Studio® CD into the CD drive of your computer.
2. Proceed through the installation process by following the on-screen prompts. If the installation window
does not automatically appear, browse to the CD drive in My Computer and double-click the setup.exe
program to run it.
3. If a “New Hardware Found” dialog box appears, follow the recommended instructions to accept your
system’s installation of the Silhouette driver.
Mac®Installation
1. Insert the included Silhouette Studio® CD into the CD drive of your computer.
2. Drag and drop the Silhouette Studio® application icon into the applications folder to install Silhouette
Studio®.
Connect the Silhouette CAMEO®
Once the Silhouette Studio® software is installed, connect the Silhouette CAMEO® to the power supply.
Then connect the Silhouette to your computer with the included USB cable as shown in the diagram.
Turn the machine on by pressing the power button. Follow the touchscreen prompts to select your
language and perform initial setup. If your PC displays a “New Hardware Found” dialog box, follow the
recommended instructions to accept your system’s installation of the Silhouette driver.
power

Getting Started with Silhouette CAMEO®
NOTE: To change the measurement units from the U.S. system to the metric system, choose
File -> Preferences… (Silhouette Studio® -> Preferences… on a Mac®). Under the Measurements
section of the preferences dialog box you will find several different units of measure.
3
How to Cut with Your Silhouette CAMEO®
Opening the Silhouette Studio®Software
Locate the Silhouette Studio® icon on the desktop, or in the Start Menu on your PC (in
the Applications folder on a Mac®). Double-click the icon to run the application.
Once Silhouette Studio® has loaded, you will notice a blank 12” x 12” page on your
screen.
If you would like to change the page dimensions or orientation, you will find the page setup
options already opened in a panel on the right-hand side of the screen.
To access these page setup options in the future, click the Page Settings button in the
options toolbar in the upper right-hand corner of the window.

Getting Started with Silhouette CAMEO®
Select Tool
New Drawing
Open
Save
Save to SD Card Print
Copy
Paste
Cut
Undo
Zoom In
Zoom to Selected Area Fill Color
Fill Gradient
Fill Pattern Line Color
Line Style Move
Rotate
Scale Replicate
Modify
Offset
Page Settings Registration Marks Grid Settings Cut Settings
Page Options Panel
Silhouette Studio® Color Preference
Preferences
Text Align
Drag Zoom
Fit to Window
Zoom Out
Redo
Send to Silhouette
PixScan Pan
Auto Trace
Send to Silhouette
Point Edit Tool Line Tool
Rectangle Tool
Rounded Rectangle
Ellipse Tool
Polygon Tool
Curved Shape Tool
Freehand Tool
Text Tool
Eraser Tool
Knife Tool
Drawing Area
Library
Online Store
Group Ungroup
Select All
Deselect All Duplicate
Delete
Bring to Front
Send to Back
Weld
Offset
Show Library
Show Library and Drawing Area
Select by Color
Smooth Freehand Tool
Arc Tool
PolygonTool
PAGE SETTINGS
4

Getting Started with Silhouette CAMEO®
Drawing Text
To cut letters or words using any font on your computer, choose the text tool from the
toolbar on the left-hand side of the screen. With the text tool selected, click anywhere on
the page to begin typing.
After clicking on the page with the text tool, a blinking cursor will appear. Begin typing any letters/
words/phrases you choose.
While you are typing/editing text, the text options panel will appear on the right-hand side of the
screen. In this panel you can change the font, text size, weight, justification, character spacing and
line spacing. Use the mouse to highlight your text before making adjustments to the font, size,
weight, etc.
To finish typing your text, click anywhere off the page. This will end the text editing mode and
deselect the text. If you need to make a change to the text, double-click the text on the page using
the Select Tool (found on the left-hand toolbar).
To move your text around the page, click and drag it to a new location.
To resize your text, select the text and then click and drag one of the corner control handles.
To rotate your text, select the text, then click and drag the green circle displayed above the object.
5

Getting Started with Silhouette CAMEO®
Drawing Simple Shapes
Silhouette Studio® has built-in functions to draw simple shapes such as circles, squares, rectangles,
lines, polygons, and freehand line art. Each of these tools can be found in the toolbar on the left-hand
side of the Silhouette Studio® window.
Lines
To draw a line, choose the Line Tool on the left-hand toolbar. Either click and drag with the
mouse to draw a line, or click once to start the line and click a second time to end.
Hold SHIFT while creating a line to make a perfectly vertical, horizontal, or 45° line.
Rectangles/Squares
To draw a rectangle, choose the Rectangle Tool from the left-hand toolbar. Either click and
drag with the mouse to draw a rectangle, or click once to set one corner and click a second
time to set the opposite corner.
Hold SHIFT while creating a rectangle to make a perfect square.
Hold ALT (OPTION on Mac®) to draw the rectangle from the center instead of one corner.
Hold SHIFT + ALT (SHIFT + OPTION on Mac®) to draw a perfect square centered on your original
click.
6

Getting Started with Silhouette CAMEO®
Cutting Your Design
Preparing the Cutting Mat
Remove the non-stick liner from the cutting mat.
Position your paper or other media on the cutting mat according to the diagram shown in Silhouette
Studio®.
If you don’t see an image of the cutting mat under your document on the screen, click the
Page Setup button in the options toolbar in the upper right-hand corner of the window.
Position your image on the screen where you want it to cut on the mat. Be sure to keep your design
within the red margins on your page.
7

Getting Started with Silhouette CAMEO®
Preparing the Silhouette to Cut
Turn the Silhouette CAMEO® on by pressing the power button and waiting for the machine to start up.
To feed the cutting mat into the Silhouette, lift the lid, align the left edge of the mat with the blue
alignment mark on the left side of the machine, press the mat against the white rollers, and press the
‘Load cut mat’ button on the LOAD screen.
8
Loading a material that has its own backing and does not require a cutting mat (such as vinyl),
requires a similar process as above but you should select ‘Load media’ instead.
If using a lined material without a cutting mat, you can use the crosscutter on the back of the
machine to trim your project after it’s done cutting. Simply place the crosscut blade into the track and
slide it across your material in the direction indicated on the crosscut blade. The crosscut blade can
be found in the storage compartment on the left side of the machine.
Adjusting the Rollers for Smaller Media
By adjusting the white rollers on the main roller shaft, the Silhouette CAMEO® can cut the following
media sizes: A4, letter, 12”, 13”.
Locate the release lever on the right side and turn it clockwise.
Twist the sliding roller so the pinchers are NOT in the notches.
Slide the roller to the desired media size and twist again to lock
the pinchers into place.
Return the release lever to the upright position to lock it in place.
white rollers
crosscut blade

Getting Started with Silhouette CAMEO®
Prepare the blade plunger by removing the protective covering and adjusting the blade to the
appropriate number setting for the material you plan to cut. Refer to Silhouette Studio® for
recommended blade settings for different materials.
fastenloosen
lock lever
blade
blade holder
9
ratchet cap
blade
numbered blade setting
To adjust the blade setting, place the grey ratchet cap on the end of the blade so the arrow on the cap
lines up with the red line on the blade. Turn the ratchet to the desired number.
Unlock the blade holder by turning the lock lever counter-clockwise. Place the blade housing in
the blade holder and turn the lock lever clockwise to secure the blade. Be sure the blade housing is
pressed completely into the holder.
Blade setting
1
4-6
7-10
2-3
Material
Thin materials such as vinyl and smooth heat transfer material
Thicker materials such as textured cardstock and pattern papers
Thick materials such as canvas
Medium-weight materials such as paper, cardstock and flocked heat transfer material
NOTE: To remove fibers from blade housing, ratchet blade down to 0 and carefully grasp the
white tip turning it counterclockwise to remove the small end cap. Blow fibers away (do not
touch blade). Replace and hand-tighten cap.