Silk'n VACUPEDI NV8615D User manual

VACUPEDI
NV8615D
ID: #05007
m
y
h
a
n
s
e
c
o
n
t
r
o
l
.
c
o
m
M
A
N
U
A
L
D
E
V
E
L
O
P
E
D
I
N
G
E
R
M
A
N
Y
User-friendly
Manual
EN
DE
FR
NL
ES
PT
GR
TR
IT
SV
NO
DA

EN
DE
FR
NL
ES
PT
GR
TR
IT
SV
NO
DA
DC
B
A
2
1
3
4
5
6
13 7
4
11
13
7
8
9
10
2
2.1.
12
5 6
4
EN

Doc./Rev.-No. 198062_20200213
EN
DE
FR
NL
ES
PT
GR
TR
IT
SV
NO
DA

3
Copyright 2020 © Home Skinovations Ltd. All rights reserved.
Legal notice
Home Skinovations Ltd. reserves the right to make changes
to its products or specifications to improve performance,
reliability, or manufacturability. Information furnished by Home
Skinovations Ltd. is believed to be accurate and reliable at
the time of publication. However, Home Skinovations Ltd.
assumes no responsibility for its use. No license is granted by its
implication or otherwise under any patent or patent rights of
Home Skinovations Ltd.
No part of this document may be reproduced or transmitted
in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of Home
Skinovations Ltd. Data is subject to change without notification.
Home Skinovations Ltd. has patents and pending patent
applications, trademarks, copyrights, or other intellectual
property rights covering subject matter in this document. The
furnishing of this document does not give you any license to
these patents, trademarks, copyrights, or other intellectual
property rights except as expressly provided in any written
agreement from Home Skinovations Ltd. Specifications are
subject to change without notice.
Silk’n and the Silk’n logo are registered trademarks of Home
Skinovations Ltd.
Invention Works B.V.
Donk 1B, 2991 LE Barendrecht, The Netherlands
www.silkn.eu – inf[email protected]
EN

4
EN
Table of contents
1 Package contents/device parts ________5
2 General information _________________5
2.1 Reading and storing the user manual ________5
2.2 Explanation of symbols ___________________5
3 Safety _______________________________7
3.1 Proper use ____________________________7
3.2 Safety instructions_______________________7
4 Checking the product and package
contents_____________________________12
5 Charging ____________________________13
6 Operation ___________________________13
6.1 Attaching or replacing the grinding disc ______14
6.2 Starting and ending the treatment __________14
7 Cleaning_____________________________15
8 Storage______________________________16
9 Troubleshooting _____________________16
10 Technical data _______________________17
11 Disposal _____________________________18
11.1 Disposing of the packaging ________________18
11.2 Disposing of the product _________________18
12 Warranty____________________________19
13 Customer service ____________________19

5
EN 1 Package contents/device parts
1Control button ( )
2Charging port
3Cover
4
Grinding discs
(Fine / Medium / Coarse), 3×*
5Fixing ring
6Filter, 3×*
7Spindle
* One piece is already attached to the product.
2 General information
2.1 Reading and storing the user manual
This user manual accompanies the callus
remover – VacuPedi (hereafter referred to
as the “product”), and contains important
information on setup and handling.
Before using the product, read the user
manual carefully. This particularly applies to the safety
instructions. Failure to do so may result in personal injury
or damage to the product.
The user manual is based on the standards and rules in
force in the European Union. When abroad, you must also
observe country-specific guidelines and laws. Store the
user manual for further use. Make sure to include this user
manual when passing the product on to third parties.
2.2 Explanation of symbols
The following symbols and signal words are used in this user
manual, on the product, USB wall adapter or packaging.
8LED lights
9Ventilation holes
10 Dust chamber
11 USB cable
12 USB wall adapter
13 Cleaning brush

6
EN
WARNING!
This signal symbol/word designates a hazard with
moderate risk, which may result in death or severe injury
if not avoided.
NOTICE!
This signal word warns of possible damage to property.
This signal symbol provides you with
useful additional information on handling
and use.
Read the user manual.
Declaration of Conformity: Products
labelled with this symbol meet all
applicable provisions of the European
Economic Area.
This symbol identifies electrical devices
that belong to the protection class II
(USB wall adapter).
Devices marked with this symbol are
only suitable for household use (dry
indoor rooms).
This symbol identifies voltage and the
current rating for direct current.
s
This symbol indicates the polarity of the
pins in the USB wall adapter.
The word “GS” stands for tested safety.
Products marked with this symbol
meet the requirements of the German
Product Safety Act (ProdSG).
8LED lights
9Ventilation holes
10 Dust chamber
11 USB cable
12 USB wall adapter
13 Cleaning brush

7
EN The international eciency mark indi-
cates that the power supply meets the
level VI requirements.
s
The USB wall adapter is equipped with a
short-circuit proof safety transformer.
sThe USB wall adapter has a switching
power supply.
IP20 The USB wall adapter is protected
against solid objects up to 12 mm.
ta Ambient temperature (USB wall
adapter)
3 Safety
3.1 Proper use
The product is exclusively designed for removing calluses
on the feet. It is only intended for private use and not
suitable for commercial purposes. Only use the product as
described in this user manual. Any other use is considered
improper and may result in damage to property or
persons. The manufacturer or vendor cannot be held
liable for damages or injury incurred through improper or
incorrect use.
3.2 Safety instructions
WARNING! RISK OF ELECTRIC
SHOCK!
• Keep the product, USB cable
and USB wall adapter away from

8
EN
water or liquids. Do not use near
bathtubs, showers, basins or other
vessels containing water. They are not
waterproof.
• Only use the product indoors.
• Only connect the product if the line
voltage of the socket corresponds to
the data on the rating plate of the USB
wall adapter.
• Only connect the USB wall adapter
to an easily accessible socket so that
you can quickly disconnect it from the
mains supply in the event of a problem.
• Only use the product with the supplied
USB cable and USB wall adapter.
• Do not use the product, USB cable or
USB wall adapter if they are damaged
or defective. The manufacturer or
customer service must replace the
damaged or defective parts to avoid
risks.
• Do not open the housing and never
insert any objects into the housing.
• Always switch the product o when

9
EN you are not using it, when you intend
to clean it, or in the event of a
malfunction. Always unplug the USB
cable and USB wall adapter when you
are not charging the product.
• Never touch the USB cable and USB
wall adapter with wet or damp hands.
• Do not pull the USB wall adapter out
of the socket by the USB cable; instead,
always pull it out by the adapter itself.
Never move, pull, or carry the product
by the USB cable.
• Keep the product, USB cable and USB
wall adapter away from open flames
and hot surfaces.
• Lay the USB cable so that it does not
pose a tripping hazard.
• Do not kink the USB cable or wrap
it around the product. Do not lay the
USB cable over sharp edges.
WARNING! RISK OF INJURY!
• The product can be used by children
aged from 8 years and above and

10
EN
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the product in a
safe way and understand the hazards
involved. Children must not play with the
product. Cleaning and user maintenance
must not be performed by unsupervised
children.
• Keep children under the age of 8 away
from the product, USB cable and USB
wall adapter.
• Make sure that children do not play
with the plastic wrapping. They may
get caught in it when playing and
suocate.
• Only use the product on your feet to
treat calloused skin. Do not use it on
other parts of the body and on soft or
thin parts of the skin.
• Only use the product for dry treatment
of skin (do not use any additives such
as oils or lotions).

11
EN • Do not continuously treat one spot of
your skin for more than 2 to 3 seconds
at a time.
• Do not use the product directly on or
near open wounds and inflamed areas
of the skin or to remove warts.
• Immediately stop using the product if
you experience pain or skin irritation.
• Consult a doctor if you are not sure
whether the product is suitable for you
(e.g. you suer from skin diseases or
diabetes, you are pregnant, or you are
using a pacemaker).
• For hygienic reasons, the product
should only be used by one person.
• Keep the product away from hair, wigs
and other long flexible objects, e.g.
shoelaces, threads, textile fibres.
• Only charge the product at
temperatures between 0 and 40 °C.
NOTICE! RISK OF DAMAGE!
• Avoid leaving the product in direct
sunlight and never expose it to
extreme heat.

12
EN
• Do not place the product on the edge
of a surface to avoid dropping.
• Only use the product with the original
accessories.
• Never fill the housing of the product
with liquid.
• Do not cover the ventilation holes
during operation to avoid overheating.
4 Checking the product and
package contents
NOTICE! RISK OF DAMAGE!
• If you are not cautious when opening
the packaging with a sharp knife or
other pointed objects, you may quickly
damage the product. Be very careful
when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are
damaged. If this is the case, do not use the product.
Contact our customer service.

13
EN 5 Charging
• Fully charge the product before first use and
when the battery power is low.
• When the battery power is low, the LED
lights become red and start to blink during
operation. Recharge the product.
• It takes approx. 2.5 hours for a full charge.
• The product cannot be used during charging.
1. Plug the smaller end of the USB cable 11 into the
charging port 2.
2. Plug the larger end of the USB cable into the USB port
of the USB wall adapter 12 .
You may also plug the USB cable into a compatible
USB power source (e.g. USB port of a computer) for
charging.
3. Plug the USB wall adapter into a mains socket for
charging.
During charging, the LED lights 8will become blue
and start to blink slowly.
4. The LED lights will become solid blue when the product
is fully charged. Unplug the USB wall adapter from the
mains socket and disconnect the USB cable from the
product.
6 Operation
• Clean the product before first use as described
in the chapter “Cleaning”.
• Before treating an area on your feet for the
first time, perform a skin sensitivity test on a
spot on your foot for maximum 3 seconds.
Start your treatment only if there is no adverse
reaction.

14
EN
6.1 Attaching or replacing the grinding disc
The product includes 3 grinding discs 4: Fine, Medium
and Coarse. With particularly rough skin, we recommend
you to start with the Coarse grinding disc.
1. Make sure the product is turned o.
2. Remove the cover 3if it is attached to the product.
3. Remove the attached grinding disc from the product. If
necessary, use the handle of the cleaning brush 13 to
aid the removal (see step 1 in Fig. B).
4. Attach the desired grinding disc onto the spindle 7
(see step 2 in Fig. B).
You will hear a click sound when the grinding disc is
secured into place.
6.2 Starting and ending the treatment
1. Make sure your feet are clean and completely dry.
2. Press the control button ( ) 1once.
The product is now turned on at a low speed. The LED
lights 8will light up blue.
3. Press the control button ( ) again if you want a higher
speed setting.
The product is now turned on at a high speed. The
LED lights will blink blue.
4. Move the rotating grinding disc 4over the parts of
your skin you intend to treat. In the process, apply
gentle pressure and only keep the grinding disc on a
spot on your skin for two to three seconds at a time,
then check the result (see Fig. C).
Do not cover the ventilation holes 9during operation
to avoid overheating.
The dust created during treatment will be sucked into
the dust chamber 10 .
5. When treatment is done, press the control button ( )
a third time to turn the product o. The LED lights will
also turn o.

15
EN 7 Cleaning
NOTICE! RISK OF DAMAGE!
• Do not use any aggressive cleaners,
brushes with metal bristles, or sharp or
metallic cleaning utensils such as knives,
hard scrapers, and the like.
Clean the product after each use.
1. Remove the attached grinding disc 4from the
product. If necessary, use the handle of the cleaning
brush 13 to aid the removal (see step 1 in Fig. B).
2. Turn the fixing ring 5counterclockwise to detach it
from the product (see Fig. D).
3. Remove the filter 6from the dust chamber 10 (see
Fig. D).
4. Clean these parts accordingly:
Main body: Wipe it o with a damp cloth. Then wipe
it completely dry with a dry cloth.
Dust chamber and grinding discs: Use the
cleaning brush to remove the dust accumulated on
them.
Filter, fixing ring and cover 3:Clean them
under running water. Wipe the fixing ring and cover
completely dry with a dry cloth and let the filter air dry
thoroughly.
Replace the filter if it is too dusty and the grinding disc
if it is worn out.
5. Reassemble the filter, fixing ring, grinding disc and cover
after cleaning. Please note, that all parts need to be
completely dry before reassembling.

16
EN
You can purchase new grinding discs and filters on
our website at “www.silkn.eu”.
8 Storage
All parts must be completely dry before being stored.
• Store all parts in a clean and dry place, avoiding heat
and direct sunlight.
• Attach the cover 3to protect the grinding disc 4
for storage.
9 Troubleshooting
Some problems may be caused by minor faults that you can
fix yourself. To do so, follow the instructions in the following
table. If it is still not possible to resolve the problem, contact
customer service. Do not repair the product yourself.
Fault Possible cause and solution
The product
does not start. Make sure the product is properly charged.
The product
does not
charge.
Make sure the USB cable is securely
connected between the product and USB
wall adapter, and the USB wall adapter is
properly connected to a mains socket.

17
EN 10 Technical data
Product
Model: NV8615D
Rated voltage: 3.7 V
Wattage: 7 W
Battery capacity: 2,000 mAh
Speed settings: 2 (low/high)
Rotation speed: 1,350 rpm (low)
1,550 rpm (high)
Charging time: 2.5 hours
Use time: Approx. 1 hour 50 min per
full charge
Weight: 266 g
Dimensions (L × W × H): 180 × 64 × 89.5 mm
USB wall adapter
Power input: 100–240 V~ 50/60 Hz, 0.25 A
Power output: 5.0 V 1.0 A
Protection class: II
Model number: PS06H050K1000EU (EU)
PS06H050K1000BU (GB)

18
EN
11 Disposal
11.1 Disposing of the packaging
Sort the packaging before you dispose of it.
Dispose of paperboard and cardboard with
the recycled paper service and wrappings
with the appropriate collection service.
11.2 Disposing of the product
(Applicable in the European Union and other European
countries with separate collection systems of recyclable
materials) Old appliances may not be disposed of
in household waste!
Should the product no longer be capable of
being used at some point in time, dispose of
it in accordance with the regulations in
force in your city or county. This ensures
that old appliances are recycled in a professional
manner and also rules out negative consequences for the
environment. For this reason, electrical equipment is marked
with the symbol shown here.
Batteries and rechargeable batteries may not be
disposed of with household waste!
As the end user you are required by law to
bring all batteries and rechargeable batteries,
regardless whether they contain harmful
substances* or not, to a collection point run by
the communal authority or to a retailer, so that
they can be disposed of in an environmentally friendly
manner. Bring the entire product (including the recharge-
able battery) to your collection point and make sure that it
is in an uncharged state!
* labelled with: Cd = cadmium, Hg = mercury, Pb = lead

19
EN Note: To remove the rechargeable battery, dismantle
the fan unit and remove the battery terminals from the
circuit board. Then remove the cover from the end of the
handle to remove the battery. Make sure the battery is not
damaged during the removal. Please note, the cover will be
damaged and the removal of the battery is not reversible.
12 Warranty
This product is covered by a 2-year warranty according to
European regulations and law. The extent of the warranty
on this product is limited to technical defects caused by
faulty production processes. In the event you want to claim
warranty please be sure to contact our customer service
for instructions. They may be able to solve your problem
without needing to return the product to the store or our
service center. Our customer service is always pleased to
help you!
13 Customer service
For more information about the products of Silk’n visit
your regional Silk’n website: www.silkn.eu. If the device
is damaged, defective, in need of repair or you need our
assistance, please contact your nearest Silk’n service
center. This manual is also available as a PDF download
from: www.silkn.eu.
Service number: 0906-2130009
Email: [e-mail]