Silvercrest STMS 2219 A1 Instruction sheet

V 1.34
English.................................................................................................................2
Čeština ..............................................................................................................23
Deutsch .............................................................................................................44

Wireless keyboard with wireless mouse STMS 2219 A1
2 - English
Table of Contents
Trademarks........................................................................................................ 3
Introduction........................................................................................................ 3
Intended Use ...................................................................................................... 3
Package Contents............................................................................................... 4
Technical Specifications ...................................................................................... 5
System Requirements ............................................................................................................................5
Safety Instructions.............................................................................................. 6
Children and Persons with Disabilities .................................................................................................6
Batteries .................................................................................................................................................7
RF Interface............................................................................................................................................7
Maintenance / Cleaning......................................................................................................................7
Operating Environment.........................................................................................................................8
Copyright...............................................................................................................................................8
Storing When Not Using the Product ..................................................................................................8
Overview........................................................................................................... 9
Before Getting Started ..................................................................................... 11
Inserting the Batteries......................................................................................................................... 11
Connecting the USB Nano Receiver................................................................................................. 12
Installing the Software........................................................................................................................ 13
Icons in the Task Bar .......................................................................................................................... 14
Getting Started................................................................................................. 15
Changing the Operating Mode........................................................................................................ 15
Configuring the Wireless Optical Mouse......................................................................................... 15
Configuring the Wireless Keyboard ................................................................................................. 16
Environmental Considerations and Recycling ................................................... 19
Conformity Notice ............................................................................................ 19
Troubleshooting ............................................................................................... 20
Warranty Information...................................................................................... 21

Wireless keyboard with wireless mouse STMS 2219 A1
English - 3
Trademarks
Microsoft Windows is a registered trademark of Microsoft Corporation, USA.
Intel and Pentium are registered trademarks of Intel Corporation, USA.
AMD®and AMD Athlon are registered trademarks of Advanced Micro Devices, Inc.
USB is a registered trademark.
Other names and product can be trademarks or registered trademarks of their respective owners.
Introduction
Thank you for purchasing this wireless keyboard with wireless mouse STMS 2219 A1. The devices
feature a SmartLink technology that makes any manual synchronisation obsolete. The multiple
function buttons of the devices let you customise the mouse and keyboard according to your needs.
The mouse features a tilt wheel (4-way scroll wheel) to allow horizontal scrolling besides the usual
vertical scrolling.
Intended Use
This Keyboard and Mouse Set, consisting of a wireless keyboard, wireless mouse and wireless
receiver, is an IT device. The device may not be used outdoors or in tropical climates. This product
has not been designed for corporate or commercial applications. Use the product in domestic
environments for private applications only. Any use other than that mentioned above does not
correspond to the intended use. This device fulfils all that relates to CE Conformity, relevant norms
and standards. Any modifications to the device other than recommended changes by the
manufacturer may result in these standards no longer being met. The manufacturer is not liable for
any damage or interference caused by unauthorized modifications. Only use the accessories
recommended by the manufacturer.
Please observe the regulations and laws in the country of use.

Wireless keyboard with wireless mouse STMS 2219 A1
4 - English
Package Contents
A Wireless Keyboard STMS 2219 A1-K
B Wireless Mouse STMS 2219 A1-M
C USB nano receiver STMS 2219 A1-R
(inserted into the wireless mouse)
D 2 AAA-type batteries, 1.5V (Micro) for wireless
keyboard
E 1 AA-type battery, 1.5V (Mignon) for wireless
mouse
F CD-ROM with software (Lineart illustration)
G User's manual (Lineart illustration)

Wireless keyboard with wireless mouse STMS 2219 A1
English - 5
Technical Specifications
- 2.4 GHz radio frequency
- SmartLink technology (no more need to establish connections between receiver and
mouse/keyboard manually)
- Range up to 5 m (15 feet)
Keyboard
- 22 function keys (hotkeys), of which 19 are programmable
- Volume adjustment dial knob
- 47.4 x 16.9 x 2.5 cm (L x W x H)
- 613 g (without batteries)
- 2 batteries type AAA, 1.5 V (Micro)
Mouse
- Optical sensor with selectable resolution between 800 cpi and 1600 cpi, LED Class 1
- 8 hotkeys, of which 7 are programmable
- Tilt Wheel (4-way scroll wheel)
- 10.8 x 6,9 x 4.1 cm (L x W x H)
- 73 g (without battery)
- 1 Battery type AA, 1.5 V
USB nano receiver
- 1.8 x 1,5 x 0,7 cm (L x W x H)
- 2 g
The technical data and design may be changed without notification.
System Requirements
- Intel®Pentium®III / AMD AthlonTM or higher
- 1 free USB 2.0 port
- Microsoft®Windows®XP, Windows Vista®or Windows®7/8
- CD-ROM or DVD-ROM Drive for installing the software

Wireless keyboard with wireless mouse STMS 2219 A1
6 - English
Safety Instructions
Before you use this device for the first time, please read the following notes in this manual and heed
all warnings, even if you are familiar with handling electronic devices. Keep this manual safe for
future reference. If you sell the device or pass it on, it is essential that you also hand over this
manual.
This icon denotes important information for safe operation of the product and for
the user’s safety.
This icon alerts about a strong light source.
This icon denotes further information on the topic.
Avoid damage to your eyes!
Never look into the LED beam.
Children and Persons with Disabilities
Electrical devices do not belong in the hands of children. People with disabilities should only use
electrical devices in appropriate circumstances. Do not allow children or persons with disabilities to
use electrical devices when not under supervision. Unless they are instructed accordingly and
supervised by a competent person responsible for their safety. Children should always be
supervised to ensure that they do not play with the product. Batteries and small parts represent
potential choking hazards. Keep the batteries in a safe place. If a battery is swallowed, seek
medical help immediately. Keep the packaging away from children and persons with disabilities
too as there is danger of suffocation.
Danger of suffocation

Wireless keyboard with wireless mouse STMS 2219 A1
English - 7
Batteries
Insert the batteries with the correct polarity. Never try to recharge the batteries and under no
circumstances throw them into fire. Do not mix battery types (old and new or carbon and alkaline,
etc.). Batteries must never be opened or deformed. Otherwise there is a risk of leaking chemicals. If
the chemicals become in contact with your skin or eyes, rinse with plenty of fresh water immediately
and seek medical aid. Remove the batteries when the device is not to be used for a long time.
Improper use may cause explosions and danger to life.
RF Interface
Turn the device off when onboard an aircraft, in a hospital, in an operating theatre or in the vicinity
of medical electronic equipment. The RF signals may interfere with the functionality of sensitive
devices. Keep the device at least 20cm (8 inches) away from pacemakers, as the RF signals may
interfere with the functionality of the pacemaker. The transmitted RF signals can cause interference
with hearing aids. Do not place the device with the wireless adapter turned on near flammable
gases or in a potentially explosive area (e.g. a paint shop), as the transmitted RF signals may cause
explosions or fire. The range of the radio wave signals depends on environmental conditions.
When data is transmitted via a wireless connection it may also be received by unauthorized
parties. Targa GmbH is not liable for any interference caused to RF or TV signals through
unauthorized modification to this device. Furthermore, Targa does not assume any liability for
replacing any cables or devices that have not been specifically approved by Targa GmbH. The
user is solely responsible and liable for troubleshooting any interference caused by unauthorized
modification of this device and for replacing appliances.
Maintenance / Cleaning
Repairs are required when this device has been damaged in any way, for example when liquid has
entered the product, when the product has been exposed to rain or moisture, when the product
does not work normally or if the product has been dropped. If smoke, unusual noises or smells are
noticed, switch off the device immediately. In these cases the device should no longer be used and
should be inspected by authorized service personnel. Please contact qualified personnel when
repair is needed. Never open the housing of the device, or the accessories. Only use a clean, dry
cloth for cleaning. Never use any corrosive liquids.

Wireless keyboard with wireless mouse STMS 2219 A1
8 - English
Operating Environment
Position the device on a stable, flat surface and do not place any objects on the device. The device
is not designed for use in environments with high temperatures or humidity (e.g. bathrooms), and
must be kept free of dust. Operating temperature and operating humidity: 5 °C to 40 °C, max.
90% RH.
Always make sure that:
- no direct heat sources (e.g. radiators) can affect the device;
- the device is not exposed to direct sunlight or bright artificial light;
- contact with spray, dripping water and corrosive liquids is avoided and the device is
never operated near water; in particular the device may never be immersed in liquids (do
not place any objects containing liquids, such as vases or drinks, near the device);
- the device is never placed in the immediate vicinity of magnetic fields (e.g.
loudspeakers);
- no fire hazards (e.g. burning candles) are placed on or near the device;
- no foreign bodies are introduced into the device;
- the device is not subject to any extreme temperature changes as this may cause moisture
through condensation and cause short-circuits; If the device has been exposed to strong
temperature variations anyway, wait (approx. 2 hours) before turning it on, so it has
reached the ambient temperature;
- the device is not subject to excessive shocks and vibrations;
Copyright
The entire content of this User’s Manual is copyrighted and is provided to the reader for information
purposes only. Copying data and information without prior written and explicit authorization from
the author is strictly forbidden. This also applies to any commercial use of the contents and
information. All texts and figures are up-to-date as per the date of print release. We assume no
liability for any changes.
Storing When Not Using the Product
When leaving unused for a long period of time, remove the batteries from the wireless keyboard
and from the wireless mouse. Remove the USB nano receiver from your computer’s USB port and
insert it into the storage compartment of the mouse. Please note that the USB nano receiver fits into
the storage compartment in only one direction, without the need to apply any force. Also make sure
that the storage temperature is maintained between 5°C and 40°C. Humidity must not exceed
90% RH.

Wireless keyboard with wireless mouse STMS 2219 A1
English - 9
Overview
1 Special keys (hotkeys)
2 USB nano receiver (inserted into the wireless mouse)
3 Battery level indicator*
4 Volume control
* The LED on the keyboard front panel will light-up briefly when inserting
the batteries.

Wireless keyboard with wireless mouse STMS 2219 A1
10 - English
5 800/1600 cpi toggle switch (press briefly)
Standard / media mode toggle switch
(keep pressed for 3 seconds)
6 Tilt wheel (4-way scroll wheel)
Volume control and mute (media mode)
7 Right mouse button
8 Left mouse button
9 Battery level indicator
10 Forward (default)
Next title (media mode)
11 Back (default)
Previous title (media mode)
12 Zoom + (default mode)
Launch Media Player (media mode)
13 Zoom - (default mode)
Play / Pause (media mode)

Wireless keyboard with wireless mouse STMS 2219 A1
English - 11
Before Getting Started
Unpack all the devices and use the package contents checklist on page 4 to verify that you have
received all items listed.
Inserting the Batteries
First insert the batteries into the wireless mouse and wireless keyboard, as shown in the figures
below. Take care to insert the batteries into the device observing the correct polarity (+ and –) then
press the On/Off button (15) to power the wireless mouse on. The wireless mouse features a
battery level indicator (9) on its top panel. If it blinks orange, the battery is empty.
Fig.: Detailed view of bottom of the keyboard
Fig.: Detailed view of bottom of the mouse
14 Keyboard battery compartment
15 On/off button of the mouse
16 Optical sensor
17 Mouse battery compartment
18 USB nano receiver

Wireless keyboard with wireless mouse STMS 2219 A1
12 - English
The wireless mouse features an automatic standby function. When not using the
wireless mouse for a certain amount of time, it will power off. Move the wireless
mouse or press any mouse button to power it back on (the drivers must be
installed).
The devices feature a battery level indicator (3 and 9). Whenever it blinks, the
batteries of the respective device are exhausted. When this happens, replace the
batteries with new batteries of the same type.
Connecting the USB Nano Receiver
If you still have your old keyboard and mouse connected to the computer, please shut down your
computer, disconnect the corresponding devices from the PC and restart the computer.
Plug the USB nano receiver (inserted into the wireless mouse) into a free USB port on your
powered-on computer.
Fig.: USB nano receiver
The operating system will detect the new hardware and will automatically install the corresponding
drivers. Depending on the operating system, one of the following messages will appear:
Under Windows® 8
When connecting the receiver for the first time, the installation process runs in background and
no message will be displayed.
Under Windows Vista
®
, Windows
®
7
When connecting the receiver for the first time, the operating system will prompt "Installing
device driver software". Wait until the message "Your devices are ready to use" appears. Your
mouse and keyboard have been successfully configured and can now be used.
Under Windows
®
XP
When connecting the receiver for the first time, the operating system will prompt "Found New
Hardware". Wait until the message "Your new hardware is installed and ready to use" appears
before using the mouse and keyboard.
If the connection to the nano receiver is interrupted or if it is not possible to establish
a connection, remove the batteries from the mouse and keyboard and re-insert
them.

Wireless keyboard with wireless mouse STMS 2219 A1
English - 13
Installing the Software
In order to be able to use the full function-capabilities of your wireless keyboard and wireless
mouse, you must install the supplied software. To do this, insert the supplied CD-ROM into the CD-
ROM drive of your computer. The setup process should start automatically, otherwise double-click
on the "setup.exe" file on the CD-ROM to start manually.
Under Windows Vista
®
and Windows
®
7/8 only the setup will be temporarily blocked and a
message "Do you want to allow the following program from an unknown publisher to make
changes to this computer?" appears. To continue setup, click "Yes".
The following setup screens correspond to the Windows
®
8 operating system. For Windows
®
XP /
Windows Vista
®
/ Windows
®
7 these screens will slightly vary but their content is the same.
To launch setup, click "Next".
Here you can select the destination folder for
the installation with the "Change" button or
use the suggested folder. To proceed click
"Next".

Wireless keyboard with wireless mouse STMS 2219 A1
14 - English
Click "Finish" to finish the setup programme.
If you are prompted to restart your computer, restart it before using the software.
Icons in the Task Bar
Double-clicking on this icon opens the configuration menu for the optical mouse (See
page 15 - Configuring the Wireless Optical Mouse for details).
Double-clicking on this icon opens the configuration menu for the keyboard (See page
16 - Configuring the Wireless Keyboard for details).
This icon indicates that the function "Num Lock" is enabled. Clicking again on the
"Num Lock" button will disable this function again.
This icon indicates that the function "Caps Lock" is enabled. Clicking again on the
"Caps Lock" button will disable this function again.
This icon indicates that the function "Scroll Lock" is enabled. Clicking again on the
"Scroll Lock" button will disable this function again.
Right-click on the corresponding icon to open a menu showing the following
options:
Open Opens the configuration menu of the corresponding device.
Info Shows information about the version of the installed driver.
Exit Exits the function. If necessary, you can open the applications again
from the Start menu of your operating system.

Wireless keyboard with wireless mouse STMS 2219 A1
English - 15
The operating systems default settings will hide disabled icons in the task bar. It is
recommended that you disable the "Hide inactive icons" option in task bar
properties.
Getting Started
Changing the Operating Mode
Use the CPI button (5) to quickly toggle between 800 cpi and 1600 cpi resolution for optical
tracking. Tracking at 1600 cpi offers a higher accuracy.
To toggle between standard and media operating mode of your optical mouse, press and hold the
CPI button (5) for at least 3 seconds until the battery level indicator (9) blinks briefly. The available
functions for media mode can be found on page 10 – Overview. In media operating mode you
can press the tilt wheel (6) to the left or right to adjust the sound volume. In standard operating
mode you can press the tilt wheel (6) to the left or right or turn the wheel to adjust the Windows
sound volume, whenever the volume icon is enabled in the system bar.
Configuring the Wireless Optical Mouse
Double-click on the icon in the task bar (lower-right corner on your screen, near the system
clock) or right-click on the icon and select "Open" from the context menu. The mouse
configuration menu will appear.
Here you can assign a function for the
highlighted mouse buttons. Click on the
radio button corresponding to the mouse
button and select the desired function from
the menu.
By using "Restore to default" you can return
all settings to factory default.

Wireless keyboard with wireless mouse STMS 2219 A1
16 - English
All selected options apply to the default mode. The button assignments for media
mode cannot be modified.
Enable changes by clicking the "Apply" button (the window remains open) or by clicking on the
"OK" button (the window closes).
Click the “About Mouse Driver” tab to display information about the mouse driver. As all other
tabs are provided by your operating system, please read the corresponding OS documentation or
online help for more information
Configuring the Wireless Keyboard
The wireless keyboard features 22 hotkeys (quick access keys) plus a volume adjustment button.
Once the software has been installed, the function keys have the following default assignments.
Additionally, there are 19 programmable functions keys.

Wireless keyboard with wireless mouse STMS 2219 A1
English - 17
Hotkey Description
Default Internet Browser (e.g. Internet Explorer)
Default E-mail programme (e.g. Microsoft®Outlook)
Internet Browser favourites
Next (e.g. Internet Explorer)
Previous (e.g. Internet Explorer)
Refresh page
Search for ...
Launch the Calculator
Opens My Computer
Computer On/Off *
Many computer mainboards have a BIOS setting such as "Boot on USB",
"Power on by USB", or similar. Enable this function to be able to power the
computer on or off via the keyboard. Please also read the documentation for
your computer or motherboard in order to adjust the BIOS setup.
Switch to Hibernation or Standby mode *
Resume from Hibernation mode *
Launch the default media player
(e.g. Microsoft®Media Player)
Playback/Pause
Stops playback
Previous title
Next title
Mute on/off
Launches Microsoft®Word (must have been installed)
Launches Microsoft®Excel (must have been installed)
Launches Microsoft®PowerPoint (must have been installed)
Launches the default calendar (e.g. Microsoft®Outlook, must have been
installed)
*not programmable

Wireless keyboard with wireless mouse STMS 2219 A1
18 - English
In order to program the programmable function keys, double-click on the icon in the task bar
(lower-right corner of your screen, near the system clock) or right-click on the icon and select
"Open" from the context menu.
The following menu will appear:
Here you can assign a function for the
highlighted keyboard keys. Click on the
radio button corresponding to the special
function key and select the desired function
from the menu.
The following option "Select a program to run" ([ … ] button) lets you select any executable file on
the hard disk of your computer which will be run by pressing the corresponding function button.
To do this, click the [ … ] button next to the desired function button. The program browse dialog
box will open. Browse for the desired executable file and confirm the settings. This procedure
depends on the operating system.
Enable changes by clicking the "Apply" button (the window remains open) or by clicking on the
"OK" button (the window closes).
By using the "Restore All To Default" you can return all modified functions to factory default.
Click the "About Keyboard Driver" tab to display information about the keyboard driver. As all
other tabs are provided by your operating system, please read the corresponding OS
documentation or online help for more information.