Silvercrest KH 700 User manual

KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH700-10/09-V2
KH 700
FOOD PROCESSOR
Food Processor
Operating instructions
6
CV_KH700_38172_LB6.qxd 27.10.2009 16:22 Uhr Seite 1

KH 700
1
2
3
4
5
6
7
8
9
0
q
u
z
t
r
e
w
i
o
VI
V
IV
III
II
I
CV_KH700_38172_LB6.qxd 27.10.2009 16:23 Uhr Seite 4

- 1 -
CONTENT PAGE
1. Appliance description / Items supplied 2
2. Intended Use 2
3. Technical data 2
4. Safety instructions 2
5. Before starting the appliance 3
6. Assembling the food processor 3
6.1 Fitting the mixing bowl..............................................................................................................3
6.2 Fitting the lid...............................................................................................................................3
6.3 Insert the ingredient by filling shaft and pusher .....................................................................4
7. Working with the mixing bowl 4
7.1 Working with the cutting blade................................................................................................4
7.2 Remove the cutting and grating blades from the accessory clip..........................................5
7.3 Insert the cutting and grating discs back into the accessory clip.........................................5
7.4 Working with the cutting and grating discs............................................................................5
7.5 Working with the kneading blade...........................................................................................6
8. Working with the blender 7
9. Cleaning & Care 8
10. Malfunctioning 9
11. Disposal 9
12. Warranty and service 9
13. Importer 10
14. Table for ingredients 10
Read these operating instructions carefully before using the appliance for the first time and preserve this
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 1

- 2 -
FOOD PROCESSOR
KH 700
1. Appliance description /
Items supplied
1Splash protection cap
2Blender lid
3Accessory clip
4Blender jug max. 1.5 l
5Motor block cover
6Motor block
7Speed controller
8Drive shaft
9Mixing bowl max. 1.5 l
0Lid for mixing bowl
qFilling shaft
wPusher
eMeasuring cup
rRetainer
tKneading blade
zBlade
uProtective case for blades
I. Potato slurry disc
II. Fine cutter
III. Coarse cutter
IV. Coarse shredder
V. Fine shredder
VI. Potato-chips disc
iDisc holder
oSpatula
Operating Instructions
2. Intended Use
This appliance is intended for the processing of
foodstuff in household quantities and only for priva-
te use in closed rooms protected from rain. This ap-
pliance is not intended for commercial or industrial
use or for operation in the open.
3. Technical data
Power supply: 230 V / 50 Hz
Power consumption: 700 Watt
Protection class: II /
Capacity blender jug: 1.5 l
KB-time blender jug: 3 miutes
Capacity mixing bowl: 1.5 l
KB-time mixing bowl: 1 minute
CO Time
The CO Time (Continuous Operation Time) details
how long an appliance can be operated without
the motor overheat-ing and becoming damaged.
After the appliance has run for this period it must be
switched off until the motor has cooled itself down.
4. Safety instructions
• Please read all safety instructions carefully.
• Make sure that the power cord never becomes
wet or damp during operation. Lay the cord such
that it cannot be pinched or otherwise damaged.
Do not leave it dangling from the working surface.
• Arrange for defective power plugs and/or
cables to be replaced as soon as possible by a
qualified technician or by our Customer Service
Department to avoid the risk of injury.
• Pull the plug from the socket when you do not use
the appliance, before changing the attachments
and before cleaning the appliance. Switching off
the appliance is not sufficient because the applian-
ce receives power as long as the power plug is
connected to the socket. In this way you will also
prevent inadvertent switching on of the appliance.
• This appliance is not intended for use by persons
(including children) with reduced physical, senso-
rial or mental cabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the applian-
ce by a person responsible for their safety.
• Children should be supervised to ensure that they
do not play with the appliance.
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 2

- 3 -
• Use only the supplied original accessories since
these have been optimised for interaction with the
appliance.
• Do not operate the appliance without ingredients.
Overheating hazard!
 Caution:
The blade zis very sharp! Exercise special care when
inserting and removing or cleaning the blade z!
 Caution:
While the machine is in use, only put those ingre-
dients in the mixing bowl 9or blender jug 4,
which are to be processed. Do not put hands and fo-
reign objects in the filling shaft qor blender jug 4
to avoid the risk of injury or damage to the machine.
• Do not attempt to open the lid 0of the mixing
bowl 9while in operation.
5. Before starting the appliance
• Before starting the device ensure that...
- the device and all accessories and the power plug
and the power cord are in perfect condition and...
– all packaging materials have been removed
from the appliance.
• Prior to initial use clean all device components as
described in the “Cleaning” chapter.
• Assemble the food processor and note that…
- The food processer is in a firm and stable posi-
tion. Secure the food processor on the working
surface with the four suction cups.
- the mixing bowl 9works only when the cover
5for the motor block 6, the mixing bowl 9
and the lid 0for the mixing bowl 9have
been properly fitted and engaged.
- the blender works only when the blender jug
4and the blender lid 2have been correctly
fitted and engaged.
- when blender jug 4, mixer lid 2, mixing bowl
9and the lid 0of the mixing bowl 9have
been fitted, only the blender will work.
6. Assembling the food processor
6.1 Fitting the mixing bowl
• Place the cover 5on the motor
block 6so that the arrow on
the cover 5points towards the
open lock on the motor block
6. Turn the cover 5anti-
clockwise until it is firmly seated.
The arrow now points towards
the closed lock.
• Position the mixing bowl 9
so that the arrow on the mi-
xing bowl 9points towards
the open lock on the motor
block 6. Take hold of the mi-
xing bowl 9with the handle
and turn it clockwise as far as
it will go. The arrow now po-
ints towards the closed lock.
6.2 Fitting the lid
 Note:
Always ensure that the lid 0is properly engaged
before switching on the appliance! Otherwise,
foodstuffs could be sprayed out during usage.
• Fit the lid 0on the mixing
bowl 9so that the recesses
of the lid 0match the slots of
the bowl 9. The marks on
the lid 0and the bowl 9
must match.
• Turn the lid 0clockwise until
you hear an impact. The lug
of the lid 0now rests on the
handle of the mixing bowl 9.
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 3

- 4 -
6.3 Insert the ingredient by
filling shaft and pusher
 Caution:
Never use your fingers, spatula, spoon handles or
similar objects for pushing foodstuff through the
filling shaft q! Risk of injury!
• You can add liquid and solid
foodstuffs to the mixing bowl
9through the filling shaft q.
You can close the filling shaft
qwith the pusher wwhile
the appliance is in use, in or-
der to avoid splashing or
flour (e.g. while kneading
flour) from coming out.
• Use the pusher wto force
food stuffs through the filling
shaft q.
• The pusher wis equipped
with a measuring cup e. If
you remove it you can reduce
size of the filling shaft q. This
can be useful when cutting or
grating foodstuffs.
7. Working with the mixing
bowl
The supplied accessories for the mixing bowl 9
consist of 6 grating and cutting discs (I-VI), a
kneading blade tand a chopping blade z. The
mixing bowl 9is very versatile to use: grating or
cutting, mixing or cutting, kneading or stirring.
7.1 Working with the cutting blade
 Caution! Risk of injury!
• The cutting edges are very sharp! Exercise speci-
al care when inserting and removing or cleaning
the cutting blade z!
• The bowl 9must first be properly locked in posi-
tion before inserting the cutting blade z. Risk of
injury!
• Never use your fingers, spatula, spoon handles
or similar objects for pushing foodstuff through
the filling shaft q!
The cutting blade zcan be used to mix, chop or
knead dough. Use the cutting blade z, for instance,
for chopping meat, cheese, onions, herbs and nuts.
• Remove the cutting blade z
from the protective case u.
• Fit the mixing bowl 9to the
food processor.
• Fit the cutting blade zon the
retainer rand place the lat-
ter on the drive shaft 8.
• Place the lid 0on the mixing
bowl 9.
• Insert the ingredients into the
mixing bowl 9through the
loading shaft q.
• Place the stodger win the lo-
ading shaft q.
• Now switch on the appliance by setting the
speed controller 7to the level recommended in
the table.
If you are uncertain about the speed, use the fastest
level (3).
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 4

- 5 -
Hints:
• Cut the ingredients into approx. 3 cm size pieces
before adding them to the bowl 9.
• The appliance chops the ingredients very fast,
therefore allow the appliance to run only briefly.
• Do not allow the appliance to run for more than
1 minute at a time.
• Should the ingredients get caught up in the bowl
9or between the blades z:
- Switch off the appliance.
- Remove the lid 0from the mixing bowl 9.
- Remove the ingredients with a spatula o.
7.2 Remove the cutting and grating
blades from the accessory clip
• Remove the blender lid 2
from the blender jug 4by
turning it clockwise.
• Grasp the accessory clip 3
on the handle at the centre of
the retainer 3with the thumb
and index finger.
• Pull the accessory clip 3with the cutting and
grating discs (I-VI) out of the blender jug 4.
• Remove the cutting and
grating discs (I-VI) from the
holder 3.
7.3 Insert the cutting and grating discs
back into the accessory clip
• Insert the cutting discs (II/III)
in the retainer slots. Begin
with the inner retainer
slots.The lateral flaps with the
elevation in the middle must
point upwards.
Make sure that all the cutting edges are pointing in-
wards.
• Place the shredder (IV/V),
grater (I) and potato-chips
disc (VI) in the storage slot on
the outside.
• Place the accssory clip 3
back in the blender jug 4.
Ensure that the rails on the ac-
cessory mounting 3grip
firmly into the shoulders of the
mixing container 4.
• Place the cover 2on the li-
quidiser 4so that the arrows
on the handle of the liquidiser
4and on the cover 2point
towards each other. Turn the
cover 2anti-clockwise until it
sits firmly.
7.4 Working with the cutting and gra-
ting discs
 Caution:
• The cutting edges are very sharp! Exercise inser-
ting and removing or cleaning the discs!
• Never use your fingers, spatula, spoon handles
or similar objects for pushing foodstuff through
the filling shaft q!
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 5

- 6 -
The cutting (II/III) and grating discs (IV/V) can be
used to slice or grate food stuffs quickly. The special
potato-chip disc (VI) enables you to make uniform
potato-chips at home. With the potato grater disc (I)
you can finely chop raw potatoes for the mixture,
and finely grate other vegetables or fruits as well.
• Place the mixing bowl 9on
the food processor. Select the
appropriate disc.
• Place the disc with the lea-
ding edge (the side without
the ring marking on the cor-
ners) in the disc holder i.
• Push the other side (marked
with two circles at the cor-
ners) down until the disc
engages with a “click”.
• Fit the retainer rto the drive
shaft 8. Insert thumb and in-
dex finger in the holes of the
disc holder iand place it on
the retainer r.
• Place the lid 0on the bowl
9.
• You can now fill ingredients
through the filling shaft q.
• Set the speed controller 7to level 3 (maximum
speed) for cutting and grating. Should you wish
to process soft fruit or vegetables you can also
select a lower speed.
• Slowly and gradually push the ingredients in the
filling shaft qusing the pusher w.
• To remove the disc from the
disc holder i, remove the
disc from the disc holder i
by pushing on the marked
side in an upward direction.
Hints:
• Cut the food into pieces so that they fit through
the filling shaft q.
• Fill the filling shaft qevenly and do not exert ex-
cessive pressure.
• If you wish to process large quantities of food do
it in small batches and empty the mixing bowl 9
inbetween.
7.5 Working with the kneading blade
With the kneading blade tyou can knead bread
dough and mix batter or cake mixture.
• Place the mixing bowl 9on
the food processor.
• Place the kneading blade t
on the retainer rand fit on
the drive shaft 8.
• Add the ingredients to the
mixing bowl 9.
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 6

- 7 -
• Place the lid 0on the bowl
9and the pusher win the
filling shaft q.
• Set the speed controller 7to the level recom-
mended in the table.
Hints:
• Put liquid ingredients into the bowl 9last and
start mixing at low speed to avoid splashing.
• Never fill the mixing bowl 9above the
MAX.mark (1.5l).
• For mixing “water like” liquids only use the speed
1 with maximum volume of 1 l to avoid liquid
spilling out.
8. Working with the blender
 Caution:
• Never switch on the blender when empty.
• Never insert the plug in the socket before the
blender jug 4and the blender lid 2have been
correctly assembled.
• Always pull the plug from the socket before
removing the blender jug 4.
• Do not fill ingredients hotter than 80°C in the
blender jug 4.
• To avoid splashing, never add more than 1.5l of
liquid in the blender jug 4.
• Never remove the blender lid 2during opera-
tion.
• Never run the blender continuously for more than
3 minutes.
You can use the blender to finely puree and mix in-
gredients. You can use the blender for preparing
soups, sauces, milkshakes, baby food or process ve-
getables and fruit into a puree
• First remove the cover 5for
the motor block 6by turning
it clockwise.
• Now place the liquidiser 4in
the opening, so that the arrow
marking on the liquidiser 4po-
ints towards the open lock on
the motor block 6. Turn the li-
quidiser 4anti-clockwise until it
is firmly seated. Ensure that the
arrow marking is pointing to-
wards the closed lock.
• Fill the ingredients in the blender jug 4. Cut them
into smaller pieces beforehand if required.
• Place the cover 2on the li-
quidiser 4so that the arrows
on the handle of the liquidiser
4and on the cover 2point
towards each other. Turn the
cover 2anti-clockwise until it
sits firmly.
• If required, insert the splash
protection cap 1and turn it
anti-clockwise to secure.
• Switch on the blender by setting the speed
controller 7to the desired level.
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 7

- 8 -
• When you have finished,
switch off the blender and re-
move the blender jug 4by
turning it clockwise.
• Remove the blender lid 2
from the blender jug 4by
turning it clockwise.
Hints:
• You can add your ingredients to the blender jug
4through the opening in the lid 2during ope-
ration. To do so, simply remove the splash protec-
tion cap 1.
• If you process hot liquids, remove the splash
protection cap 1to allow the steam to escape.
• Should ingredients be trapped in the blender jug
4during operation, proceed as follows:
- Switch off the device (speed controller 7to le-
vel 0) and pull the plug from the socket.
- Remove the splash protection cap 1and the
lid 2.
- Remove the trapped ingredients in the blender
jug 4using the spatula o. Ensure you do not
damage the spatula owith the blade z!
9. Cleaning & Care
 Caution:
Never immerse the device in water or other
liquids. There could be potential hazard of
life-threatening electric shock, if moisture en-
ters the voltage conducting parts upon opera-
ting the appliance again.
• Exercise special care when cleaning the blades
z, the blender jug 4with installed blade and
the cutting discs (I-VI). The blades and cutting ed-
ges are extremely sharp! Risk of injury!
• Wipe the housing with a clean, damp cloth after
each use.
 Warning regarding appliance
damage:
NONE of the appliance components are designed
for cleaning in a dishwashing machine! Additional-
ly, do not use abrasive cleansers for cleaning appli-
ance components.
• You can clean the mixing bowl 9and the lid 0
in hot soapy water.
• Always remove the plug from the socket before
cleaning the appliance. Otherwise, you are at
risk of receiving an electric shock!
• Clean all appliance components that have come
in contact with foodstuff with detergent and hot
water after use.
• Use an appropriate dishwashing brush for places
that are difficult to access.
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 8

- 9 -
10. Malfunctioning
If the food processor suddenly stops functioning:
It means that the appliance has overheated and the
integrated safety cut off has switched off the food
processor.
• Pull the plug from the socket
• Set the speed controller 7to level 0
• Allow the device to cool down for 15 minutes
• If the appliance has not cooled off completely
after 15 minutes, it will not start. Wait another
15 minutes before switching it on again.
If the food processor does not switch on:
• Check whether the power plug is inserted in the
socket.
• Check whether the cover 5for the motor block 6,
mixing bowl 9and lid 0are inserted and engaged
properly.
11. Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved
dis-posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally responsible manner.
12. Warranty and service
The warranty for this appliance is for 3 years from
the date of purchase. The appliance has been ma-
nufactured with care and meticulously examined be-
fore delivery. Please retain your receipt as proof of
purchase. In the event of a warranty claim, please
make contact by telephone with our Service Depart-
ment. Only in this way can a post-free despatch for
your goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for
private use only and is not intended for commercial
use. The warranty is void in the case of abusive and
improper handling, use of force and internal tampe-
ring not carried out by our authorized service
branch. Your statutory rights are not restricted in
any way by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after un-
packing the appliance, at the latest, two days after
the purchase date. Repairs made after the expira-
tion of the warranty period are subject to payment.
DES UK LTD
Tel.: [phone] (£ 0,10 / minute)
e-mail: [e-mail]
Kompernass Service Ireland
Tel: [phone] (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [e-mail]
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 9

- 10 -
14. Table for ingredients
The following tables should serve you as examples
for orientation as regards which ingredients should
be processed in what quantities and at what speed
level.
Do not exceed the specified operating period to
avoid overheating of the appliance.
In addition to the 3 levels, a short powerful spurt of
operation is available with the pulse stage “P”. The
switch does not engage in pulse position. Hold the
switch in this position or repeatedly turn it to pulse
position.
13. Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
IInnggrreeddiieennttssMMaaxx..qquuaannttiittyySSppeeeeddlleevveellAAcccceessssoorryyOOppeerraattiinnggdduurraattiioonn
Sweetened dough
250 g flour
10 g yeast
125 ml milk
1 egg, 25 g butter
15 g sugar
3Kneading blade 1 minute
Waffle dough
125 g butter
100 g sugar
1 pack vanilla sugar, 4
eggs
70 g flour
80 g corn starch
2 teaspoons baking
powder
125 g cream
3Kneading blade 1 minute
hard fruit
(apple)
500 gr. 3Cutter attachment/
grater attachment
45 seconds
hard vegetables
(potatoes/carrots) 500 gr. 3Potato-chips disc 45 seconds
Meat / Fish 500 gr. 3 / P Blade 30 seconds
soft vegetables
(tomatoes) 500 gr. 2 Blade 30 seconds
soft fruit
(grapes) 500 gr. 2 Blade 15 seconds
IB_KH700_38172_LB6 27.10.2009 10:30 Uhr Seite 10