Silvercrest SKMP 1300 C2 User manual

HOYER Handel GmbH Tasköprüstraße 3 DE-22761 Hamburg DEUTSCHLAND Status of information · ǾȝİȡȠȝȘȞȓĮ ȑțįȠıȘȢ ʌȜȘȡȠijȠȡȚȫȞ · Stand der Informationen:
PROFI FOOD PROCESSOR SKMP 1300 C2
06/2018 ID: SKMP 1300 C2_18_V1.2 KÜCHENMASCHINE PROFI
Bedienungsanleitung
DE
AT
CH
GR
CY
DE
GB
IE
NI
PROFI FOOD PROCESSOR Operating instructions
GB
IE
NI
GB IE
NI
CY
307875 307876
307875 307876
IAN
IAN
ȂǾȋǹȃǾ ȀȅȊǽǿȃǹȈ PROFI ȅįȘȖȓĮ ȤȡȒıȘȢ
GR
CY

English..................................................................................... 2
ƧnjnjLjǎNJNjƽ ............................................................................... 20
Deutsch.................................................................................. 38

Overview / ƧǑNJǔNjǝǑLjǔLj / Übersicht
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
17
18
19
20
21
22
9
B
24
A
23
22
14/16/17

2 GB
Contents
1. Overview ........................................................................................ 3
2. Intended purpose ............................................................................ 4
3. Safety information ........................................................................... 5
4. Items supplied ................................................................................. 8
5. Unpacking and setting up ................................................................ 8
6. Overview of functions ...................................................................... 9
7. Using the mixing tools ................................................................... 10
8. Using the blender jug ..................................................................... 11
9. Basic operation .............................................................................. 12
9.1 Power supply...................................................................................... 12
9.2 Switching the device on/off and selecting speed .................................... 12
9.3 Pulse function ..................................................................................... 13
9.4 Overheating protection........................................................................ 13
10.Dismantling the device ................................................................... 13
11.Cleaning and servicing the device .................................................. 13
11.1 Cleaning the base unit......................................................................... 14
11.2 Cleaning in the dishwasher.................................................................. 14
11.3 Cleaning the accessories ..................................................................... 14
11.4 Cleaning the blender jug ..................................................................... 14
11.5 Storage ............................................................................................. 14
12.Troubleshooting ............................................................................. 15
13.Disposal ........................................................................................ 15
14.Ordering accessories ..................................................................... 16
15.Technical specifications .................................................................. 16
16.Warranty of the HOYER Handel GmbH ........................................... 17

3
GB
1. Overview
1Lid of the refill opening
2Lid (of the blender jug)
3Refill opening
4Seal
5Blender jug
6Blades
7Drive unit for the blender jug (under the cover)
8Cover
9Safety switch
10 Unlocking lever (for the drive arm)
11 0 - 10 Speed control with on/off function
12 PULSE Pulse button
13 Power cable with mains plug
14 Dough hook
15 Mixing bowl
16 Whisk
17 Beater
18 Suction foot
19 Base unit
20 Filling opening (with flap)
21 Splash guard
22 Drive arm
23 Axle for holding mixing tools
24 Cable spool

4 GB
Thank you for your trust!
Congratulations on your new Profi food pro-
cessor.
For safe handling of the product and in or-
der to get to know the entire scope of fea-
tures:
• Thoroughly read these user in-
structions prior to initial use.
• Above all, observe the safety in-
formation!
• The device should only be used
as described in these user in-
structions.
• Keep these user instructions for
reference.
• If you pass the device on to
someone else, please include this
copy of the user instructions. The
user instructions are a part of
the product.
We hope you enjoy your new Profi food pro-
cessor!
Symbols on your device
The food-safe material of devices
with this symbol will not change the
taste or smell of food.
Variants
The device is supplied in two versions:
- 307875 anthracite
- 307876 red
The operation is identical for both colour
variants.
2. Intended purpose
The Profi food processor is used to mix, whisk,
beat, stir, knead, and blend food.
These user instructions describe the basic
functions. For information on the prepara-
tion of special dishes, refer to the recipe
book included in the delivery.
The device is designed for private, domestic
use. The device must only be used indoors.
This device must not be used for commercial
purposes.
Foreseeable misuse
WARNING! Risk of material damage!
~The food processor should not be used
continuously...
- with the mixing tools for longer than
10 minutes
- with the blender jug for longer than
3minutes
- at maximum load (mixing/kneading
and blending simultaneously with
maximum filling levels) for longer than
30 seconds.
After this, the device must remain switched
off until it has cooled down to room temper-
ature.

5
GB
3. Safety information
Warnings
If necessary, the following warnings will be used in these user instructions:
DANGER! High risk: failure to observe this warning may result in injury to life and
limb.
WARNING! Moderate risk: failure to observe this warning may result in injury or serious
material damage.
CAUTION: low risk: failure to observe this warning may result in minor injury or material
damage.
NOTE: circumstances and specifics that must be observed when handling the device.
Instructions for safe operation
~This device must not be used by children.
~Children must not play with the device.
~The device and the power cable must be kept away from children.
~This device can be used by people with restricted physical, sensory
or intellectual abilities or people without adequate experience and/
or understanding if they are supervised or instructed on how to use
this device safely and if they are aware of the resulting hazards.
~If the mains power cable of this device should become damaged, it
must be replaced by the manufacturer, the manufacturer's customer
service department or a similarly qualified specialist, in order to
avoid any hazards.
~Disconnect the mains plug from the wall socket…
…when it is not supervised,
…before you assemble or disassemble the device
…before changing accessories or attachments, and
…before cleaning.
~This device is not intended to be operated using an external timer
clock or a separate remote control system.
~Depending on type of use, the device is intended for the following
maximum operating times without interruption:
max. 10 minutes mixing/kneading with the mixing tools,
max. 3 minutes blending in the blender jug
max. 30 seconds at maximum load (mixing/kneading and blend-
ing simultaneously at maximum filling levels).
After this, the device must remain switched off until it has cooled
down to room temperature.

6 GB
~ The device must be disconnected from the mains if left unattended
and prior to assembly, disassembly or cleaning.
~ Please remember that the blades of the blender jug are very sharp:
- Never touch the blades with your bare hands, to avoid cuts.
- When washing manually, the water should be sufficiently clear
that you can see the blades easily, so that you do not injure
yourself on them.
- When emptying the blender jug, ensure that you do not touch
the blades.
~
Prior to replacement of parts or attachments which move when in
operation, the device must be switched off and disconnected from
the mains.
~ Please take note of the chapter on cleaning (see “Cleaning and ser-
vicing the device” on page 13).
DANGER for children
~Children must not play with packing ma-
terial. Do not allow children to play with
plastic bags. There is a risk of suffoca-
tion.DANGER to and from pets
and livestock
~Electrical devices can represent a haz-
ard to pets and livestock. In addition,
animals can also cause damage to the
device. For this reason you should keep
animals away from electrical devices at
all times.
DANGER! Risk of electric
shock due to moisture
~The device must never be operated in
the vicinity of a bathtub, a shower, a
filled washbasin or similar.
~The base unit, the power cable and the
mains plug must not be immersed in wa-
ter or other liquids.
~Protect the base unit against moisture,
water drips and splashes.
~Should liquids enter the base unit, pull
out the mains plug immediately. Have
the device checked before reusing.
~Never touch the device with wet hands.
~If the device falls into water, disconnect
the mains plug immediately. Only then
is it safe to retrieve the device.
DANGER! Risk of electric
shock
~Only plug the mains plug into the wall
socket after the device has been com-
pletely assembled.
~Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-
ily accessible after the device is
plugged in.
~Ensure that the power cable cannot be
damaged by sharp edges or hot points.
Do not wrap the power cable around
the device.
~Even after it has been switched off, the
device has not been completely discon-
nected from the mains. In order to fully
disconnect it, pull out the mains plug.
~Keep the power cable away from hot
surfaces (e.g. hot plate).

7
GB
~When using the device, ensure that the
power cable cannot be trapped or
crushed.
~When removing the mains plug from the
wall socket, always pull the plug and
never the cable.
~Disconnect the mains plug from the wall
socket…
… if there is a fault,
… when you are not using the food pro-
cessor,
… prior to assembling or disassembling
the food processor,
… prior to cleaning the food processor
… during thunderstorms.
~Do not use the device if there is visible
damage to the device, accessories or
power cable.
~To avoid any risk, do not make modifi-
cations to the product.
DANGER! Risk of injury
from cutting
~Never reach into the rotating blades. Do
not touch rotating parts with spoons or
similar utensils. Keep long hair or loose
clothing away from rotating parts as
well.
Please remember that the blades contin-
ue to turn for a short time after switching
off the device.
DANGER from rotating
parts
~Do not touch rotating parts with spoons
or similar utensils. Keep long hair or
loose clothing away from rotating parts
as well.
~Always ensure that the speed control is
set to 0before you plug the mains plug
into the wall socket.
~
Switch the device off and pull out the
mains plug from the wall socket before
you exchange auxiliary or additional
equipment moving in operation.
~ When the blender jug is not attached, the
cover must be mounted. Otherwise the
device will not work, in order to avoid in-
juries.
WARNING! Risk of material
damage
~Place the device exclusively on a level,
dry, non-slip and waterproof surface, so
that it can neither fall nor slip off.
~The mixing mechanism must not be op-
erated continuously for longer than
10 minutes, or the blender for longer
than 3 minutes. You must then allow the
device to cool down to room tempera-
ture.
~The device must never be operated with-
out the jug.
~Never place the device on a hot sur-
face, e.g. hot plate.
~Do not change the position of the de-
vice, as long as there is still food or
dough in the device.
~Never overfill the blender jug or mixing
bowl, since otherwise the contents could
be ejected. Overflowing liquid would
flow onto the surface. You should there-
fore place the device on a waterproof
surface.
~Do not operate the device when it is
empty, as this causes the motor to over-
heat and may result in it being dam-
aged.
~Never fill the blender jug with hot or
boiling material.
~
Only use the original accessories.
~Do not use any astringent or abrasive
cleaning agents.
~The device is equipped with non-slip
plastic suction feet. As furniture is coat-
ed with a wide array of varnishes and
plastics, and is also treated with differ-
ent care products, it cannot be fully
ruled out that some of these materials
contain ingredients that could attack
and soften the non-slip plastic suction
feet. If necessary, place a non-slip mat
under the device.

8 GB
4. Items supplied
1 Profi food processor, base unit|19
1 splash guard|21
1mixingbowl|15
1 blender jug|5with:
-lid|2and
- lid of the refill opening|1
1 dough hook|14
1whisk|16
1 beater|17
1 copy of the user instructions
1 recipe book
5. Unpacking and set-
ting up
NOTE: when in operation for the first time,
some odour may be generated by the de-
vice. This is harmless. Please ensure ade-
quate ventilation.
1. Remove all packing material.
2. Check to ensure that all parts are pres-
ent and undamaged.
3. Disassemble the device (see “Dismant-
ling the device” on page 13).
4. Clean the device prior to its first
use! (see “Cleaning and servicing the
device” on page 13).
5. Figure B: wind the excess power cable
around the cable spool|24 on the un-
derside of the base unit|19.
6. Place the base unit|19 on a level, dry
and waterproof surface, so that the de-
vice can neither fall nor slip off.
Select a smooth, clean surface, so that
the suction feet|18 can stick firmly in
place and ensure a secure grip.
CAUTION:
~Overflowing liquid would flow onto the
surface. You should therefore place the
device on a waterproof surface.

9
GB
6. Overview of functions
Working tool Speed Function Notes
Dough hook|14 1 - 2 - Kneading and mixing solid
dough or relatively solid in-
gredients
max. operating
time:
10 minutes
2 - 3 - Kneading yeast dough
- Kneading thick batter
Beater|17
2 - 3 - Mixing thick batter
- Mixing butter and flour
- Mixing yeast dough
4 - 6
-Cakemix
- Beating together butter and
sugar
-Cookiedough
Whisk|16 7 - 10
- Whipped cream
- Egg white
- Mayonnaise
- Whipping butter to a froth
Blender jug|5PULSE +
1 - 10
- Blending and shredding soft
or liquid ingredients.
NOTE: at least speed setting 1
must be set for the pulse but-
ton|12 to work.
max. operating
time:
3 minutes

10 GB
7. Using the mixing
tools
Lifting up the drive arm
1. Turn the unlocking lever|10 to point up-
wards (in the direction of the arrow)
and lift up the drive arm|22 until it
clicks into place and the unlocking le-
ver|10 snaps back into its locked posi-
tion.
Inserting the mixing bowl
2. Place the mixing bowl|15 into the base
unit|19 in such a way that the metal
pins on the lower edge fit into the re-
cesses in the base unit.
3. Lock the mixing bowl|15 by rotating it
clockwise slightly, until it is firmly in
place.
Mounting the splash guard
CAUTION:
~Never use the mixing bowl|15 without
the splash guard attached|21. The ma-
terial you are mixing could otherwise
be ejected.
4. Place the splash guard|21 onto the
drive arm|22 from below. The arrow
(S) on the splash guard|21 and the ar-
row (T) on the drive arm|22 point to
one another..
5. Rotate the splash guard|21 in the direc-
tion of the closed lock symbol until it
clicks into place.
Inserting the mixing tool
6. Select the appropriate mixing tool:
- Dough hook|14: for heavy doughs,
e.g. bread dough
-Whisk|16: for whipping cream, egg
white etc.
- Beater|17: for light dough or batter,
e.g. cake mix or pancake batter.
For further information: see “Overview
of functions” on page 9.
7. Place the mixing tool onto the axle|23
from below.
Ensure that the small metal pins on the
axle|23 slot into the recesses in the mix-
ing tool.
8. Figure A: press the mixing tool up-
wards slightly and rotate it anticlock-
wise until it stops.

11
GB
Adding ingredients
• You can add ingredients into the mixing
bowl|15 while the drive arm|22 is lift-
ed up.
• During mixing, you can add ingredients
through the filling opening|20 in the
splash guard|21:
- Reduce the speed to 1 - 2.
- Open the flap of the filling open-
ing|20.
- Add the ingredients.
- Close the flap of the filling open-
ing|20 again.
Lowering the drive arm
9. Rotate the unlocking lever|10 upwards
in the direction of the arrow.
10.Move the drive arm|22 all the way
down. The unlocking lever|10 jumps
back to the vertically locked position.
The device is now fully assembled. On work-
ing with the device: see “Basic operation”
on page 12.
8. Using the blender jug
NOTE: when you use the blender jug|5, the
axle|23 alsoturns.Themixing bowl|15and
splash guard|21 should therefore also be
mounted, but not a mixing tool.
Mounting the blender jug
1. Remove the cover|8to the right.
2. Position the blender jug|5on the drive
unit|7so that the white arrow (T) on
the bottom of the blender jug points to
the open lock symbol.
3. Turn the blender jug|5clockwise until it
is firmly in place. The white arrow (T)
now points to the closed lock symbol.
Adding ingredients
• First add the liquid ingredients to the
blender jug|5, and then the solid ones.
• Cut the solid ingredients into small piec-
es in advance, so that the pieces do not
get jammed in the blades.
• During blending, you can add ingredi-
ents through the refill opening|3in the
lid|2:
- Reduce the speed to 1 - 2.
- Rotate the lid of the refill opening|1
anticlockwise and remove it.
- Add the ingredients.
- Replace the lid|1such that the small
plastic nibs fit into the recesses at the
refill opening|3.
- Turn the lid|1clockwise until it is firm-
ly in place.

12 GB
Mounting the lid
NOTES:
• For safety reasons, the blending process
will only start when the lid|2is correctly
mounted.
• To make it a little easier to close the
lid|2, place a few drops of cooking oil
onto a cloth and rub it over the seal|4.
4. Place the lid|2slightly distorted onto the
blender jug|5.
5. Rotate the lid|2clockwise until it stops.
The device is now fully assembled. On work-
ing with the device: see “Basic operation”
on page 12.
9. Basic operation
9.1 Power supply
1. Assemble the device for the desired
function.
2. Check that the speed control|11 is set
to 0 (off).
3. Plug the mains plug|13 into a suitable
wall socket. The wall socket must contin-
ue to be easily accessible after the de-
vice is plugged in.
4. Pull out the mains plug before cleaning
the device.
9.2 Switching the device on/
off and selecting speed
WARNING! Risk of material damage!
~The mixing mechanism must not be op-
erated continuously for longer than
10 minutes, or the blender for longer
than 3 minutes. You must then allow the
device to cool down to room tempera-
ture.
NOTE: the device only works when either
the cover|8is mounted (for the mixing tools)
or the lid|2is correctly mounted on the
blender jug|5.
1. Switch the device on by turning the
speed control|11 to the right.
2. Start at a slightly lower speed, and
slowly increase to the desired speed
(see “Overview of functions” on
page 9).
3. Reduce the speed to setting 1 - 2 when
you are adding ingredients during oper-
ation through the filling opening|20 or
the refill opening|3.
4. Set the speed control|11 to 0to switch
the device off.

13
GB
NOTE: above all, the ideal speed depends
on the consistency of the material being
blended. The more liquid the contents, the
faster you can blend them.
9.3 Pulse function
NOTE: the pulse function only works if the
speed control|11 is set to at least 1.
• By pressing the PULSE|12 button, you
can briefly increase the speed to the
highest setting (10).
• Use the pulse function to shred small
quantities of e.g. nuts, herbs or onions
in the blender jug|5.
9.4 Overheating protection
The device has an overheating protection
system. If the motor becomes too hot, the de-
vice automatically switches itself off:
1. Switch off the device.
2. Pull out the mains plug|13.
3. Allow the device to cool down to room
temperature.
When the device has cooled down suffi-
ciently, it can be switched on again.
10. Dismantling the de-
vice
Removing the blender jug
1. Rotate the blender jug|5anticlockwise
slightly, and lift it off upwards.
2. Replace the cover|8.
Removing the lid of the blender
jug
3. Rotate the lid|2anticlockwise until you
can remove it.
4. Rotate the lid of the refill opening|1anti-
clockwise and remove it.
Lifting up the drive arm
5. Turn the unlocking lever|10 to point up-
wards (in the direction of the arrow)
and lift up the drive arm|22 until it
clicks into place and the unlocking le-
ver|10 snaps back into its locked posi-
tion.
Removing the mixing tool
6. Press the mixing tool upwards slightly
and rotate it clockwise until it can be re-
moved from the axle|23.
Removing the splash guard
7. Rotate the splash guard|21 anticlock-
wise until it can be removed.
Removing the mixing bowl
8. Rotate the mixing bowl|15 anticlock-
wise until it can be removed.
Lowering the drive arm
9. Rotate the unlocking lever|10 upwards
in the direction of the arrow.
10.Move the drive arm|22 all the way
down. The unlocking lever|10 jumps
back to the vertically locked position.
11. Cleaning and servic-
ing the device
DANGER! Risk of electric shock!
~Disconnect the mains plug|13 from the
wall socket before each cleaning.
~Never immerse the base unit|19 in wa-
ter. DANGER! Risk of injury from
cutting!
~Please remember that the blades|6of
the blender jug|5are very sharp. Never
touch the blades|6with your bare
hands, to avoid cuts.

14 GB
~When washing manually, the water
should be sufficiently clear that you can
see the blades|6easily, so that you do
not injure yourself on them.
CAUTION:
~Never use any abrasive, corrosive or
scratching cleaning agents. These might
damage the device.
NOTE: certain foods or spices (e.g. curry,
carrots) can discolour the plastic (e.g. the
splash guard|21 or the lid of the refill open-
ing|1). This is not a defect with the device
and harmless to health.
11.1Cleaning the base unit
1. Clean the base unit|19 with a damp
cloth. You can also use some detergent.
2. Use clear water and wipe with a clean
cloth.
3. Do not use the base unit| 19 until it is
completely dry again.
11.2Cleaning in the dish-
washer
The following parts are dishwasher-safe:
- Mixing bowl|15
- Blender jug|5
-Lid|2of the blender jug
- Lid of the refill opening|1
- Dough hook|14
-Whisk|16
- Beater|17
- Splash guard|21
The following parts must never be cleaned
in a dishwasher:
- Base unit|19
11.3Cleaning the accessories
1. Rinse the blender jug|5or the mixing
bowl|15 with warm water and pour
away the water.
2. Clean all accessories by hand in a sink
with dishwater or in the dishwasher.
3. When cleaning by hand, rinse all parts
with clean water.
4. Allow the parts to dry completely before
using them again.
11.4Cleaning the blender jug
1. Place the blender jug|5onto the device.
2. Fill it approximately half-full with warm
water containing detergent.
3. Mount the lid|2.
4. Check that the speed control|11 is set
to 0.
5. Plug the mains plug|13 into a suitable
wall socket.
6. Set the speed control|11 to 1.
7. Press the PULSE button|12 several
times.
8. Remove the blender jug|5from the de-
vice.
9. Pour out the dishwater.
10.Rinse the blender jug|5under clear wa-
ter.
11.Allow the blender jug|5to dry com-
pletely before you use it again.
11.5Storage
• Allow all parts to dry completely before
placing them in storage.
• Store the device protected against dust
and dirt and out of the reach of chil-
dren.
•Figure B: you can wind up the power
cable in the cable spool|24 on the un-
derside of the base unit|19.

15
GB
12. Troubleshooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
~Never attempt to repair the device your-
self.
13. Disposal
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discardedwith normal householdwaste,but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
Fault Possible causes /
Action
No function
• Has the device been
connected to the
power supply?
• Check the connec-
tion.
• Is the cover|8mount-
ed correctly?
Blender cannot
be switched on. • Is the lid|2mounted correctly?
Whisk|16, beat-
er|17, dough
hook|14, or
blades|6not
turning or only
turning with
great difficulty.
• Switch off immediate-
ly, pull out mains
plug|13 and check:
-Blockageinthe
jug?
- Food too tough or
too hard?
- Device not assem-
bled correctly?

16 GB
14. Ordering accessories
On our website you can find information re-
garding the accessories that can be reor-
dered.
Order online
shop.hoyerhandel.com
1. Scan the QR code with your smart-
phone/tablet.
2. The QR code will take you to a website
where you can reorder.
15. Technical specifica-
tions
Model: SKMP 1300 C2
Mains voltage: 220 - 240 V ~
50 Hz
Protection class: II
Power rating: 1,300 Watt
Maximum filling vol-
ume of the blender
jug|5:
Mixing bowl|15:approx. 1.5 litres approx. 6.3 litres
max. continuous op-
eration (short cycle):
- food processor:
-blender:
- at maximum load
(mixing/knead-
ing and blend-
ing
simultaneously at
maximum filling
levels):
(indicates how long
the device is permit-
ted to run continu-
ously)
10 minutes
3 minutes
30 seconds

17
GB
Symbols used
Subject to technical modifications.
16. Warranty of the
HOYER Handel GmbH
Dear Customer,
your device is provided with a 3 year war-
ranty starting with the purchase date. In the
event of product defects, you are entitled to
statutory rights against the vendor. These
statutory rights are not restricted by our war-
ranty presented in the following.
Warranty conditions
The warranty period starts with the purchase
date. Please keep the original purchase re-
ceipt in a safe place. This document is re-
quired to verify the purchase.
If within three years from the purchase date
of this product a material or factory defect
occurs, the product will be repaired or re-
placed by us – at our discretion – free of
charge to you. This warranty implies that
within the period of three years the defective
device and the purchase receipt are present-
ed, including a brief written description of
the defect and the time it occurred.
If the defect is covered by our warranty, the
repaired or a new product will be returned
to you. No new warranty period starts with
a repair or replacement of the product.
Warranty period and statutory
claims for defects
The warranty period is not extended when
the warranty has been claimed. This also ap-
plies to replaced and repaired parts. Any
damages and defects already existing at the
time of purchase must be reported immedi-
ately upon unpacking. Repairs arising after
the expiration of the warranty period are
subject to a charge.
Warranty coverage
Thedevicewasproducedcarefullyaccording
to strict quality guidelines and tested diligent-
ly prior to delivery.
The warranty applies to material or factory
defects.
Double insulation
Certified Safety. Devices must
comply with the generally ac-
knowledged rules of technology
and the German Product Safety
Act (Produktsicherheitsgesetz -
ProdSG).
With the CE marking,
HOYER|Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials: cardboard
(except corrugated cardboard)
The symbol identifies parts that
can be cleaned in the dishwasher.

18 GB
Excluded from the warranty are
wear parts subject to normal wear
and damages to fragile parts, e.g.
switches, batteries, lamps or other
parts manufactured from glass.
This warranty expires if the product is dam-
aged, not used as intended or not serviced.
For the proper operation of the product, all in-
structions listed in the operating instructions
must be observed carefully. Any form of use
and handling that is advised against in the
operating instructions or warned against
must always be avoided.
The product is only intended for private and
not for commercial use. In the case of incor-
rect and improper treatment, use of force and
interventions not performed by our author-
isedServiceCentre,thewarrantyshallcease.
Handling in case of a warranty
claim
In order to ensure prompt processing of your
matter, please observe the following notes:
• Please keep the article number
IAN: 307875 / 307876 and the pur-
chase receipt as a purchase verification for
all inquiries.
• The article number can be found on the
rating plate, an engraving, the title
page of your instructions (in the bottom
left), or as a label on the rear or under-
side of the device.
• If faulty operation or other defects occur,
first contact the Service Centre listed in
the following by telephone or email.
• Then, you are able to send a product re-
ported as defective free of charge to the
service address specified to you, includ-
ing the purchase receipt and the infor-
mation on the defect and when it
occurred.
Pleasevisitwww.lidl-service.comto
download this and many other
manuals, product videos and soft-
ware.
Service Centre
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: [email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
Service Malta
Tel.: [phone]
E-Mail: [email protected]
Service Cyprus
Tel.: [phone]
E-Mail: [email protected]
IAN: 307875 / 307876
Supplier
Please note that the following address is no
service address. First contact the afore-
mentioned Service Centre.
HOYER Handel GmbH
Tasköprüstraße 3
DE-22761 Hamburg
GERMANY
GB
IE
MT
CY