Silvercrest SKF 2800 B2 User manual

IAN 275171
COOL-ZONE DEEP FAT FRYER SKF 2800 B2
COOL-ZONE DEEP FAT FRYER
Operating instructions
KALTZONEN-FRITTEUSE
Bedienungsanleitung
HIDEGZÓNÁS OLAJSÜTŐ
Használati utasítás
FRITÉZA SE STUDENOU ZÓNOU
Návod k obsluze FRITÉZA
Návod na obsluhu

GB Operating instructions Page 1
HU Használati utasítás Oldal 23
CZ Návod k obsluze Strana 45
SK Návod na obsluhu Strana 67
DE/AT/CH Bedienungsanleitung Seite 89
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék mindegyik
funkcióját.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

1
3
4
7
8
6
5
9
q
w
1
e
0
2

GB │ 1 ■
SKF 2800 B2
Index
Introduction...................................................2
Intended use ..................................................2
Package contents ..............................................3
Disposal of packaging..................................................... 3
Description of the appliance/accessories ...........................4
Technical data .................................................4
Safety instructions .............................................5
Beforefirstuse ................................................8
Low-acrylamide cooking ........................................8
Deep frying ...................................................9
Preparation ............................................................. 9
Frying foods............................................................ 10
Solid cooking fats .......................................................11
Timer .......................................................12
After deep-frying .............................................12
Changing the cooking oil or fat ..................................13
Cleaning and care.............................................14
Storage .....................................................15
Tips .........................................................15
Home-made chips .......................................................15
Frozen foods ...........................................................16
How to hinder unwanted aftertastes .........................................16
Healthy nutrition.........................................................17
Heat protection function........................................18
Table – frying times ...........................................19
Troubleshooting ..............................................20
Appendix....................................................21
Disposal of the appliance .................................................21
Disposal of batteries .....................................................21
Notes on EC Conformity Declaration ........................................21
Importer ...............................................................21
Warranty.............................................................. 22
Service................................................................22
Read the operating instructions carefully before using the device for the
first time and preserve this booklet for later reference. Pass this manual
on to whoever might acquire the device at a future date.

■ 2 │ GB SKF 2800 B2
Introduction
Congratulations on the purchase of your new appliance!
You have clearly decided in favour of a modern, high-quality product. These
operating instructions are part of this product. They contain important information
on safety, use and disposal. Before using the product, familiarise yourself with all
operating and safety instructions. This appliance must only be used as described
and for the purposes indicated. Please also pass these operating instructions on
to any future owner(s).
Intended use
This appliance is intended exclusively for frying foods in domestic households.
This appliance is intended exclusively for use in domestic households. Not to
be used for commercial purposes.
Use the appliance only in dry places, and never use it outdoors.
WARNING
Danger if used for incorrect purpose
The appliance may be dangerous if it is not used for its intended purpose
and/or used for any other purpose.
► Only use the appliance for its intended purpose.
► Observe the procedures described in these operating instructions.
NOTE
► Using the appliance for other than its intended purpose can be dangerous.
Use the appliance only for its intended purposes. Observe the procedures
described in these operating instructions. Claims of any kind for damage
resulting from unintended use, incompetent repairs, unauthorised modifica-
tion or the use of unauthorised spare parts will not be accepted. The user is
the sole bearer of the risk.

GB │ 3 ■
SKF 2800 B2
Package contents
This appliance is supplied with the following components as standard:
▯ Cool-Zone Deep Fat Fryer:
–Frying basket
–Control/heating element with timer
–Stainless steel container
–Housing with lid
▯ Operating instructions
1) Remove all parts of the appliance and the operating instructions from the box.
2) Remove all packaging materials and any adhesive labels from the appliance.
NOTE
► Check the delivery for completeness and for signs of visible damage.
► If the delivery is incomplete, or is damaged due to defective packaging or
through transportation, contact the Service Hotline (see chapter Service).
Disposal of packaging
The packaging protects the appliance from transport damage. The packaging
materials have been selected in accordance with their environmental friendliness
and disposal attributes, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging material
which is no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the appliance’s original packaging during the warranty
period so that the appliance can be packed properly for returning in the
event of a warranty claim.

■ 4 │ GB SKF 2800 B2
Description of the appliance/accessories
Viewing window
Permanent metal filter
Frying basket
Stainless steel container
Removable control/heating element
Lid release button
Cable spool
Temperature control
Control lamp
On/Off switch
-Timer
3Latch handle
!Reset button
Technical data
Mains voltage 230 V ~, 50 Hz
Rated power 2800 W
Capacity for cooking oil approx. 3 litres
Capacity for solid fats approx. 2.5 kg
Power supply: timer Button cell AG 13 LR44 1.5 V
All of the parts of this appliance
that come into contact with food
are food-safe.

GB │ 5 ■
SKF 2800 B2
Safety instructions
RISK OF ELECTRIC SHOCK
► Ensure that the power cable never becomes wet or damp
when the appliance is in use. Route the cable so that it
cannot be trapped or damaged in any way.
► Connect the appliance to a mains power socket supplying a
voltage of 230 V ~/50 Hz.
► To avoid risks, arrange for defective plugs and/or power
cables to be replaced at once by qualified technicians or
our Customer Service Department.
Never submerge the operating/heating element and
the housing with the power cable in water, and do not
clean these components under running water.
WARNING! RISK OF INJURY!
► This appliance may not be used by children under the age
of 8. This appliance may be used by children aged 8 and
upwards if they are under constant supervision. This appliance
can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning safe
use of the appliance, and if they understand the potential risks.
► The appliance and its connecting cable must be kept away
from children younger than 8 years old.
► Cleaning and maintenance may not be carried out by children.
► Provide a stable location for the appliance.
► Do not operate the appliance if it has sustained a fall or is
damaged in any way. Have the appliance checked and/or
repaired by qualified technicians if necessary.

■ 6 │ GB SKF 2800 B2
WARNING! RISK OF INJURY!
► Hot steam is generated during the frying process, especially
when the lid is open. Keep a safe distance away from the
steam.
► Ensure that all parts are completely dry before pouring oil
or liquid fat into the deep fat fryer. Otherwise, hot oil or fat
could splatter out.
► Carefully pat all foodstuffs dry before placing them in the
deep fat fryer. Otherwise, hot oil or fat could splatter out.
► Be especially careful with frozen foodstuffs. Remove all ice
particles. The more ice there is on the foodstuff, the more the
hot oil or fat will splatter.
► Some parts of the appliance become very hot during opera-
tion. Touching these may cause serious burns.
► The appliance should be set up in a stable position with the
side grip recesses accessible to avoid spillage of hot liquids.
► Never lift the stainless steel container out of the housing dur-
ing operation.
WARNING! RISK OF FIRE!
► Do not use an external timing switch or a separate remote
control system to operate the appliance.
► NEVER melt solid fat (fat in blocks) in the deep fat fryer. The
heating element may be damaged by the high temperature
or there is a risk of fire! Melt the fat beforehand in a saucepan
or similar.

GB │ 7 ■
SKF 2800 B2
WARNING! RISK OF FIRE!
► Do not use the appliance near hot surfaces.
► Never leave the appliance unattended while it is being used.
Caution! Hot surface!
NEVER use water to extinguish a fire in the deep
fat fryer!
► Old or dirty fats and oils can spontaneously ignite if over-
heated. Change the oils or fats regularly. In the case of a fire,
remove the plug from the mains power socket and smother the
burning fat or oil with a damp towel or fire blanket.
CAUTION – APPLIANCE DAMAGE!
► When filling the stainless steel container with fat, NEVER fill
it to above the MAX marking or to below the MIN marking.
First ensure that there is sufficient oil or fat in the deep fat
fryer every time you intend to switch the appliance on.
► NEVER switch the appliance on if there is no oil or liquid fat
in it.
► This deep fat fryer is suitable only for frying foodstuffs.
It is not designed for cooking liquids.
INFORMATION ON USING BATTERIES
This appliance uses a battery. When handling batteries,
please observe the following:
RISK OF EXPLOSION!
► Do not throw batteries into a fire. Do not recharge batteries.

■ 8 │ GB SKF 2800 B2
INFORMATION ON USING BATTERIES
► Never open batteries and never solder or weld batteries.
There is a risk of explosion and injury!
► Check the condition of the batteries at regular intervals.
Leaking batteries can cause damage to the appliance.
► If you do not intend to use the appliance for an extended
period, remove the batteries.
► If the batteries have leaked, use protective gloves. Clean the
battery compartment and the battery contacts with a dry cloth.
► Keep batteries out of the reach of children. Children might
put batteries into their mouth and swallow them. If a battery is
swallowed, medical assistance must be sought immediately.
Before first use
1) Before you use the deep fat fryer for the first time please clean all individual com-
ponents thoroughly and carefully dry them (see Chapter “Cleaning and Care”).
2) Pull the timer -out of the deep fat fryer.
3) Remove the insulation strip from the battery compartment.
4) Push the timer -back into the recess in the deep fat fryer.
NOTE
► If you are unable to pull the insulating strip out of the battery compartment,
open the battery compartment, remove the battery and then remove the
insulation strip.
► Insert the battery into the battery compartment according to the polarity
marked on the battery compartment cover and then replace the battery
compartment cover.
Low-acrylamide cooking
Acrylamide is a possibly carcinogenic substance formed from a reaction with
amino acids when frying foodstuffs with a high starch content. The formation of
acrylamide increases rapidly at temperatures of more than 175°C.

GB │ 9 ■
SKF 2800 B2
You should therefore avoid frying foodstuffs with a high starch content, for
example chips, at temperatures above 170°C. The foodstuffs should only be
fried to golden-yellow, instead of dark or brown. This is the only way to achieve
low-acrylamide cooking.
Deep frying
We recommend cooking oil or liquid cooking fat for use in this deep fat fryer.
You can also use solid cooking fats. Read the chapter “Solid Cooking Fats” for
more information.
Preparation
1) Place the appliance on a horizontal, level, stable and heat-resistant surface.
NOTE
► If you wish to place the deep fat fryer below the cooker extraction hood,
ensure that the cooker is switched off.
2) Unwind all of the power cable from the cable spool .
3) Open the appliance lid by pressing the lid release button . The appliance
lid flips open.
4) Pull the handle upwards until it audibly engages. Remove the frying basket .
TIPS
► Only use oils or fats which are specifically labelled as non-foaming and
are suitable for deep frying. This information is to be found on the packag-
ing or the label.
► Never mix different types of oil or fat! The deep fat fryer could froth over.
5) Fill the dry and empty deep fat fryer (with inserted control/heating element )
with cooking oil, liquid or molten fat (about 3 litres of oil or about 2.5 kg of
solid fat).
NOTE
► When charging the stainless steel container with oil or fat, NEVER fill it
to above the MAX marking or to below the MIN marking.
6) Insert the power plug into the mains power socket.
RISK OF ELECTRIC SHOCK
► The power cable must not come into contact with the hot parts of the deep
fat fryer. Danger of electric shock!

■ 10 │ GB SKF 2800 B2
7) Replace the frying basket .
WARNING – RISK OF INJURY!
► When closing the lid, always ensure that you do not touch the black part at
the front. The metal parts get very hot! Risk of burns!
8) Close the appliance lid.
9) To lower the frying basket , raise the handle on the frying basket 
slightly, push the latch handle 3downwards and then lower the handle.
Frying foods
1) Switch on the deep fat fryer using the on/off switch . The control lamp
integrated in the on/off switch lights up.
2) Turn the temperature controller to the desired temperature. The cooking
oil or the fat is now heated up to the required temperature. When the re-
quired temperature has been reached, the green control lamp lights up.
NOTE
The correct frying temperature is to be found either on the food packaging or
in the frying times table in these operating instructions. A rough guide as to
which foods should be fried at what temperature is given by the pictures on
the front of the deep fat fryer:
Symbol Food Temperature
Prawns 130°C
Chicken 150°C
Chips (fresh) 170°C
Fish 190°C
The values given are only for guidance. The temperature can vary depending
on the properties of the foods and personal taste!

GB │ 11 ■
SKF 2800 B2
3) Pull the handle upwards until it audibly engages.
4) Open the appliance lid by pressing the lid release button .
5) Lift the frying basket out of the deep fat fryer. Add the food to be fried.
Do not fill the frying basket to more than the max. fill level marked on
the inside of the frying basket . However, always take note of the frying
quantity indicated on the packaging of the food to be deep-fried!
6) Carefully replace the frying basket in the deep fat fryer.
7) Close the appliance lid. This must audibly click into place.
8) Then raise the handle on the frying basket slightly and push the latch
handle 3downwards. The handle can now be lowered. The frying basket 
now lowers into the hot oil or fat.
NOTE
► The frying process can be monitored through the viewing window in the
lid of the appliance.
Solid cooking fats
To prevent fat from spraying and the appliance from becoming too hot, please
take the following precautions when using solid frying fat:
■ When using fresh fat, start by melting the blocks of fat slowly, under low
heat, in a separate pan. Then carefully pour the molten fat into the deep fat
fryer. When this has been done, insert the plug into a mains power socket
and switch the deep fat fryer on.
■ After use, store the deep fat fryer with the solidified fat at room temperatures.
If the fat gets too cold, it could cause splattering on remelting! To avoid this, poke
a few holes into the solidified fat with a wooden or plastic spatula. Ensure that
you do not damage the operating/heating element .
■ To melt the fat, switch on the appliance using the on/off switch and set
the temperature control to 130˚C. The integrated control lamp in the on/
off switch will light up.
■ Wait until all of the fat has melted. The green control lamp can come on
and go out several times during this process. Do not set the desired frying
temperature until all of the fat has melted.

■ 12 │ GB SKF 2800 B2
Timer
You can programme a countdown of up to 60 minutes with the timer -:
■ Press the “ ” button on the timer -to switch it on.
■ Press the “+” and “-” buttons to set the desired time in minutes.
■ Press the “ ” button to start the time countdown. The set time will flash
twice to show that the countdown is starting.
You will hear a few beeps on completion of the countdown.
The timer -will switch off automatically.
TIPS
► The heating element is NOT switched off when the countdown finishes!
Therefore, take note of the signal tone from the timer -to avoid spoiling
the food.
► When the battery is depleted, replace it. Always use batteries of the same
type. Ensure that the batteries are inserted with the correct polarity.
After deep-frying
1) When the food is ready, pull the handle upwards until the latch handle 3
engages.
2) Leave the frying basket in this position to drip off.
3) Press the On/Off switch . The deep fat fryer is now switched off. Remove
the power plug from the mains power socket.
4) When the food has dripped off, open the appliance lid by pressing the latch
handle .
WARNING – RISK OF INJURY!
► Never touch the frying basket directly after deep frying. It will be extremely
hot! Only lift the frying basket out of the deep fat fryer using the handle!
5) Lift the frying basket carefully out of the deep fat fryer. If necessary, shake
off excess oil or grease over the fryer.
6) Tip the fried food into a bowl or a sieve (lined with absorbent kitchen paper!).

GB │ 13 ■
SKF 2800 B2
If you do not use the deep fat fryer regularly, it is advisable to store the cooled
oil in well-sealed bottles or other containers in the refrigerator or a similar cool
storage location. Fill the bottles through a fine sieve in order to remove any food
particles from the oil.
Changing the cooking oil or fat
Do not change the oil until it has completely cooled down. Solid fats must still be
in a slightly liquid state so that they can be poured.
1) Open the appliance lid.
2) Remove the frying basket .
3) Remove the control and heating element .
4) Place the control and heating element in a clean and dry location.
5) Carefully remove the stainless steel container with the oil or fat from the
deep fat fryer.
6) Pour the oil or fat into suitable containers, for example bottles.
Use the pouring runnel at the corner of the stainless steel container .
NOTE
The disposal of cooking oils and fats is regulated differently in every com-
munity or town. Disposal of such oils or fats in the normal household refuse is
often prohibited. Make enquiries at your local community administration office
about suitable disposal sites.
7) Thoroughly clean all parts of the deep fat fryer as described in the Chapter
“Cleaning and Care”.
8) Refill the deep fat fryer with fresh oil or fat as described in the Chapter
“Frying”.

■ 14 │ GB SKF 2800 B2
Cleaning and care
WARNING – RISK OF ELECTRIC SHOCK!
► Always remove the plug from the mains power socket before cleaning the
appliance.
► Never immerse the control/heating element , the power cord or
the housing into water. Do not clean them under running water! This will
irreparably damage the appliance. If required, clean the device with a
damp cloth.
► Never open the appliance’s operating/heating element .
WARNING – RISK OF BURNS!
► Allow the appliance to cool down completely before cleaning it.
CAUTION – PROPERTY DAMAGE!
► When cleaning the components, do not use aggressive or abrasive cleaning
agents or materials such as scouring milk or steel wool. These could damage
the upper surface of the appliance!
To simplify cleaning, dismantle the deep fat fryer:
1) Open the appliance lid and pull it upwards and out.
2) Pull the handle upwards until it audibly engages. Remove the frying basket .
3) Pull the control/heating element upwards out of the guide rails. Place the
control/heating element in a clean and dry location.
4) Take out the stainless steel container and remove the fat or oil.
NOTE
The frying basket and the stainless steel container can be cleaned
in the dishwasher. They are suitable for dishwashers.
5) Clean the housing and the appliance lid with a damp cloth. If required, use
a mild detergent on the cloth.
6) Clean the control/heating element with a damp cloth. If necessary, add a
little mild detergent to the cloth. Wipe this off afterwards using a damp cloth
so that all detergent residue is removed. Dry the control/heating element 
thoroughly.

GB │ 15 ■
SKF 2800 B2
NOTE
–If you want to clean the permanent metal filter in the interior of the
appliance, place the cover in warm water with a mild washing-up liquid.
–Leave it for a moment to soak, and sway it back and forth.
–Then rinse the appliance lid off with clear water.
–Dry the appliance lid and then place it upright on its side so that any
excess water still inside the lid can drain away.
–Dry it again and make sure that there is no water remaining under the
rubber lip on the bottom of the lid. Lift the rubber lip, as required, to dry it.
Make sure that the lid is completely dry before re-use!
7) Dry all parts well before Assembly.
8) Reassemble the deep fat fryer in the reverse order.
Storage
1) Lift or carry the appliance using the side grip recesses on the housing.
2) Wrap the power cable around the power cable spool .
3) Store the appliance with the appliance lid closed. This will keep the inside of
the deep fat fryer clean and free of dust.
Tips
Home-made chips
■ Potatoes intended for frying should be in good condition and not germinating.
■ Use potato varieties that are suitable for frying, such as “King Edward”,
“Maris Piper”, “Cara”, etc.
■ After peeling, cut the potatoes according to the intended preparation (chips
or slices).
■ Soak the potatoes for about one hour before frying. This will help remove
part of the sugar content, which is one of the constituent products for the
formation of acrylamide.

■ 16 │ GB SKF 2800 B2
■ Carefully dry the potatoes.
■ Always fry home-made potatoes twice:
–first for 10 - 14 minutes at 150°C then for 3 - 4 minutes at 170°C,
depending on the desired degree of browning.
■ Deep-frozen chips are pre-cooked and thus only need to be fried once.
Comply with the instructions on the packaging.
Frozen foods
Deep-frozen foodstuffs (-16 to -18°C) cool the oil or fat to a considerable extent,
because of this they do not cook fast enough and may also soak up too much oil
or fat. To avoid this, proceed as follows:
■ Do not attempt to fry large volumes all at once. Do not fill the frying basket 
to more than the maximum fill level marked on the inside of the basket. After
lowering the frying basket , the food must be completely covered by the
oil/fat.
■ Heat the oil for at least 15 minutes before adding the frozen foods.
■ Adjust the temperature control to the temperature specified in these
operating instructions or on the food’s packaging.
■ Preferably, allow the deep frozen food to thaw at room temperature. Remove
as much ice and water as possible before adding the food into the deep fat
fryer.
WARNING – RISK OF BURNS!
Always close the appliance lid before lowering the frying basket into
the hot oil or fat. There is a risk of burns from splashing fat!
■ Always add foods as slowly and carefully as possible into the deep fat
fryer, as deep frozen foods can cause the oil or fat to bubble violently and
abruptly.
How to hinder unwanted aftertastes
Some foodstuffs, especially fish, release fluids when being fried. These fluids
collect in the oil or fat and can influence the smell and taste of fried foods that
are later cooked in the same oil or fat.
Proceed as follows to obtain a neutral-tasting oil or fat:
■ Heat the fat or oil to 150°C and and place two thin slices of bread or a
couple of small sprigs of parsley into the frying basket .

GB │ 17 ■
SKF 2800 B2
WARNING – RISK OF BURNS!
Always close the appliance lid before lowering the frying basket with the
parsley or the bread into the hot oil or fat. Splashing fat can cause burns.
■ Lower the frying basket into the fat and close the lid.
■ Wait until the oil or fat is no longer bubbling and remove the bread or parsley
with a skimmer. The oil or fat now has a neutral taste once again.
Healthy nutrition
Nutritional experts recommend the use of vegetable oils and fats containing
unsaturated fatty acids (e.g. linoleic acid). However, these oils and fats lose their
positive characteristics faster than other oils and must therefore be exchanged
more frequently.
Orient yourself on the following guidelines:
■ Exchange the oil or fat regularly. If you use the deep fat fryer mainly to
prepare chips and strain the oil or fat after every use, it can be used 10
to 12 times.
■ However, do not use the oil or fat for longer than six months. Always follow
the instructions given on the packaging.
■ As a general rule, oils and fats cannot be used so often if you mainly fry
foods with lots of proteins, such as meat or fish.
■ Do not mix fresh oil with old oil.
■ Change the oil or fat if it foams on being heated, if it develops a strong taste
or odour, if it becomes dark and/or if it develops a syrupy consistency.