Silvercrest SHK 100 G3 User manual

HEAT PAD SHK 100 G3
IAN 290385
HEAT PAD
Operating instructions and safety advice

GB / IE / NI Operating instructions and safety advice Page 5
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.

A
1 2
B
3

5GB/IE/NI
Table of contents
List of pictograms used........................................................................................................Page 6
Introduction...................................................................................................................................Page 6
Intended use........................................................................................................................................Page 6
Parts description..................................................................................................................................Page 7
Scope of delivery................................................................................................................................Page 7
Technical data.....................................................................................................................................Page 7
Important safety instructions.........................................................................................Page 7
Safety system..............................................................................................................................Page 9
Start-up .............................................................................................................................................Page 9
Switching on / off / Selecting the temperature...................................................................................Page 9
Temperature levels ..............................................................................................................................Page 10
Automatic switch-off ............................................................................................................................Page 10
Cleaning and care....................................................................................................................Page 10
Storage .............................................................................................................................................Page 11
Disposal............................................................................................................................................Page 11
Warranty / Service centre .................................................................................................Page 11
Declaration of Conformity................................................................................................Page 12

6 GB/IE/NI
List of pictograms used
Read the instructions! Do not dry in a tumbler dryer.
Volt (AC) Do not iron.
Hertz (mains frequency) Do not dry-clean.
Watt (effective power) Automatic
shut-off Automatic switch-off
Safety class II 6 Temperature levels
Observe the warning and safety
instructions! Illuminated function display
Not suitable for very young children
age 0–3 years! Automatic
shut-off Breathable
Do not stick needles into it! Removable control unit
Do not use folded or rucked! Turbo "Turbo" rapid heating function
Caution - Risk of electric shock!
Danger to life! b
a
Dispose of the packaging and the
heating pad in an environmentally
friendly way!
This heating pad is machine washable .
Set the washing machine to an extra
gentle washing cycle at 30 °C.
00000000 HOHENSTEIN HTTI
The textiles used in this heating pad
meet the strict human ecological re-
quirements of Oeco-Tex Standard
100, as verified by the German
Hohenstein Research Institute.
Do not use bleach.
Heat Pad
Introduction
Please familiarise yourself with the hea-
ting pad before getting started and using
it for the first time. To do so, please care-
fully read the following operating instructions and
the important safety information. Use the heating
pad only as described and for the stated areas of
use. Keep these instructions in a safe place. If you
pass the heating pad on to anyone else, please en-
sure that you also pass on all the documentation.
Intended use
This heating pad is intended for applying heat to the
human body. It can be used to apply heat to specific
Introduction / Important safety instructions
Introduction

7GB/IE/NI
Introduction / Important safety instructions
areas. This heating pad is not suitable for use in
hospitals or for any other commercial use. In par-
ticular it must not be used for babies or infants, per-
sons who are insensitive to heat, helpless persons, or
animals. Any use other than that described above or
modification of the heating pad are not permissible
and may lead to injury and / or damage to the
heating pad. The manufacturer accepts no liability
for any damage caused by improper use.
Parts description
1Control unit (see fig. A)
2Function display (see fig. A)
3Plug-in connector (see fig. B)
Scope of delivery
Please check immediately on unpacking that the
delivery scope is complete and that the heating pad
is in perfect condition.
1 Heat Pad
1 Control unit/ plug-in connector
1 Set of instructions for use
Technical data
Model: SHK 100 G3
Type: P10
Power supply: 220–240 V / 50–60 Hz
Power input: 100 W
Dimensions: approx. 47 x 36 cm
Protection class: II /
Electric field strength: max. 5000 V / m
Magnetic field strength: max. 80 A / m
Magnetic flux density: max. 0.1 milli-Tesla
Material:
Top / bottom: 100 % polyester
Manufacturer:
MGG Elektro GmbH
Steinstraße 27
DE-40210 Düsseldorf
GERMANY
IMPORTANT INSTRUCTIONS –
KEEP FOR FUTURE REFERENCE!
Important safety
instructions
Failure to ob-
serve the following instructions can
cause personal injury or property
damage (electric shock, burns, fire).
The following safety instructions and
hazard warnings are not only inten-
ded to protect your own health and
the health of others, but also to
prevent damage to the heating
pad. Please observe these safety
instructions and pass on this opera-
ting manual together with the hea-
ting pad.
SCALDING HAZARD!
This heating pad may not
be used by persons insensitive to
heat and other persons in need
of protection who do not respond
to overheating (e.g. diabetics,
Introduction

8 GB/IE/NI
Important safety instructions / Safety system / Start-up
Important safety instructions
persons with skin changes caused
by illness or scarred skin areas
in the application area, after using
analgesics or alcohol). There is
a risk of receiving skin burns.
This
heating pad may not be
used for very young children
(0–3 years), as they are unable
to react to overheating. There is
a risk of receiving skin burns.
This heating pad may not be used
by young children (3–8 years)
unless the control unit was set by
a parent or a supervising person
and the child was adequately in-
structed on the safe use of the
heating pad. There otherwise is
a risk of burns.
This heating pad may be used by
older children age 8 and up, and
persons with diminished physical,
sensory or mental capacities or
lacking experience and know-
ledge when supervised and in-
structed on the safe use of the
heating pad and understand the
associated risks.
Children must be supervised to
prevent them from playing with
the heating pad. There is a risk
of injury.
Children must not perform clean
or maintain the product without
supervision. There is a risk of in-
jury.
This heating pad is not intended
for hospital or commercial use.
This poses a risk of injuries and /
or damage to the heating pad.
Do not insert needles or
pointed objects into the heating
pad. There is a risk of electric
shock.
Do not switch on the
heating pad whilst folded or pu-
shed together. The heating pad
may otherwise be damaged.
Do not use when wet! Otherwise
there is a risk of electric shock.
This heating pad may only be
operated together with the con-
trol unit specified on the label.
The heating pad may otherwise
be damaged.
The electric and magnetic fields
emitted by this heating pad could
potentially interfere with the func-
tionality of your pacemaker. Ho-
wever, the levels are far below
the permissible limits: electric field
strength: max. 5000V/m, mag ne-
tic field strength: max. 80 A /m,
magnetic flux density: max.
0.1 milli-Tesla. Therefore please
consult your physician and the

9GB/IE/NI
Important safety instructions / Safety system / Start-up
manufacturer of your pacemaker
before using this heating pad.
D o not pull, twist or kink the cable s.
The heating pad may otherwise
be damaged.
Frequently check the heating pad
for wear or damage. If signs the-
reof are detected, the heating
pad was used improperly or will
no longer heat up, it must first be
inspected by the manufacturer
before being switched on again.
If the power cord of the heating
pad is damaged, it must be re-
placed by the manufacturer or
its service department, or a simi-
larly qualified person, to avoid
hazards.
With the heating pad switched
on, never
– place objects on it (e.g. suitc ases
or clothes baskets),
– place a heating source such
as a hot-water bottle, heating
pad or similar items on it. The
heating pad may otherwise be
damaged.
The electronic components inside
the control unit will heat up whilst
operating the heating pad. For
this reason, the control unit must
not be covered or be lying on the
heating pad during operation.
This poses a risk of injuries and /
or damage to the heating pad.
Always observe the information
on start-up, cleaning and care,
and storage.
If you have additional questions
on using our products, please
contact our Customer Service
Department.
Safety system
Note: The heating pad is equipped with a safety
system. The electronic sensor technology prevents the
entire surface of the heating pad from overheating
by automatically switching off in the event of a fault.
If the safety system switches the heating pad off au-
tomatically due to a fault, then the function display 2
on the control unit 1is no longer illuminated, even
if the heating pad is switched on.
Please note that, for safety reasons, the heating
pad must not be used after a fault and must be
returned to the service address indicated.
Start-up
Note: The heating pad may smell of plastic the first
time you use it, but this will disappear after a short
period of time.
To begin, first connect the control unit 1to the
heating pad with the plug-in connector 3
(see fig. B).
Switching on / off /
Selecting the temperature
Switching on:
Set the control unit 1to 1, 2, 3, 4, 5 or 6 to
switch on the heating pad.
Note: The function display 2illuminates after
Important safety instructions

10 GB/IE/NI
Cleaning and care / Storage / Disposal / Warranty / Service centre
Start-up / Cleaning and care
the heating pad is switched on.
Note: This heating pad features rapid heating,
which allows it to heat up within the first 10 mi-
nutes of operation.
Switching off:
Set the control unit 1to 0 to switch off the
heating pad.
Note: The operating display 2will switch off.
Selecting the temperature:
Just before using the heating pad, set it to the
highest temperature setting (setting 6). This will
cause the heating pad to warm up quickly.
When using the heating pad for several hours, set
it to the lowest temperature setting (setting 1).
When opera-
ting the heating pad for several hours,
we commend setting the control
unit 1to the lowest setting to pre-
vent overheating and potential burns
to the part of the body heat is
applied to.
Temperature levels
Set the required temperature level on the control
unit 1(see fig. A).
Level 0: off
Level 1: minimum heat
Level 2–5: customised heat
Level 6: maximum heat
Automatic switch-off
Note: The heating pad switches itself off automati-
cally after about 90 minutes. The function display
2
then starts to flash.
Then select the setting 0 and after about 5 se-
conds, reset the heating pad to the desired
temperature setting to switch it on again.
If the heating pad is no longer used after
the timer expires:
– switch off the heating pad (setting 0),
– unplug from the socket,
– disconnect the plug-in connection 3, i.e. the
control unit 1, from the heating pad.
Cleaning and care
DANGER TO
L
IFE BY ELECTRIC SHOCK! Alwa ys
remove the mains plug from the so cket
and the plug-in connector
3
with the control
unit 1from the heating pad (see fig. B) before
cleaning the heating pad. Otherwise there is a
risk of electric shock.
Use a dry, lint-free cloth for control unit 1clea-
ning and care.
RISK OF DAMAGE TO THE PRO-
DUCT OR PROPERTY! Never im-
merse the control unit 1in water or
other liquids. It may otherwise be damaged.
If the heating pad is slightly soiled, use a dam-
pened cloth and a little liquid mild detergent, if
necessary.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Do
not use chemical cleaning or scouring
agents to clean the heating pad and control unit
1. The heating pad and control unit 1may
otherwise be damaged.
T he heating pad is machine-washab le.
Set the washing machine at an extra
washing cycle for delicate items at
30 °C.
For ecological reasons, please only wash the
heating pad together with other textiles. Use a
mild laundry detergent according to the
manufacturer’s instructions.
Please note that frequent washing will cause
wear to the heating pad. It should therefore be

11GB/IE/NI
Cleaning and care / Storage / Disposal / Warranty / Service centre
washed no more than max. 10 times in a washing
machine throughout its useful life.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Please
note that the heating pad may not
be dry-cleaned, bleached, wrung out, dried
mechanically, mangled or ironed. The heating
pad may otherwise be damaged.
Do not use bleach. Do not use any
cleaning agents containing bleach
(such as heavy duty detergents).
Do not dry in a tumbler dryer.
Do not iron.
Do not dry-clean.
Reshape the still damp heating pad to the origi-
nal size immediately after washing, and dry flat,
spread on a clothes drying rack.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Do
not hang the heating pad up to dry
with pegs or similar. The heating pad may other-
wise be damaged.
DANGER OF ELECTRIC SHOCK!
Do not reconnect the control unit 1
to the heating pad until the plug-in
connector 3and the heating pad are com-
pletely dry. Otherwise there is a risk of electric
shock.
DANGER OF ELECTRIC SHOCK!
RISK OF PROPERTY DAMAGE!
Do not under any circumstances switch
the heating pad on to dry. Otherwise there is a
risk of electric shock.
Storage
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Let
the heating pad cool before putting
it away. The heating pad may otherwise be da-
maged.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! To
prevent the heating pad from beco-
ming sharply creased, do not store other objects
on top of the heating pad. The heating pad may
otherwise be damaged.
If you do not intend to use the heating pad for
any length of time, store it in the original packaging
in a dry environment and without weighing it
down. Disconnect the plug-in connection 3,
i.e. the control unit 1, from the heating pad to
do so.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
In accordance with European Directive
(covering waste electrical and electronic
equipment) and its transposition into
national legislation, worn-out electrical
devices must be collected separately
and taken for environmentally compatible
recycling.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
Warranty / Service centre
We provide a 3-year warranty from the date of
purchase for defects in material or manufacture of
the heating pad.
Start-up / Cleaning and care

12 GB/IE/NI
Service centre / Declaration of Conformity
The warranty does not cover:
· Damage from improper use.
· Wear parts.
· Damage caused by the customer.
·
If the device has been opened by an unauthoris ed
repair shop.
This warranty does not affect the customer‘s legal
rights. The customer must provide proof of purchase
in order for any warranty claims within the warranty
period to be honoured. Warranty claims must be
filed with MGG Elektro GmbH, Düsseldorf, Ger-
many within 3 years from the date of purchase.
In the event of a claim, please contact
our Service Department listed below:
Service Hotline (toll-free):
0800 93 10 319
(Mon–Fri: 8 am–6 pm)
ser[email protected]
1800 93 92 35
(Mon–Fri: 8 am–6 pm)
ser[email protected]
If we ask you to return the defective heating pad,
please send it to the following address:
NU Service GmbH
Lessingstraße 10 b
DE-89231 Neu-Ulm
GERMANY
IAN 290385
Declaration of Conformity
This heating pad complies with the requirements of
the relevant European and national guidelines.
This is confirmed by the CE mark.
The relevant declarations are held by the manufac-
turer.

NU Service GmbH
Lessingstraße 10 b
DE-89231 Neu-Ulm
GERMANY
Last Information Update: 05 / 2017
Ident.-No.: 07.100.306-0517-IE / NI
IAN 290385