Silvercrest SSRM 20 A1 User manual

PORTABLE FM RADIO SSRM 20 A1
IAN 312011
UKW-SCAN-RADIO
Bedienungsanleitung
PORTABLE FM RADIO
Operating instructions

GB/IE/NI Operating instructions Page 1
DE/AT/CH Bedienungsanleitung Seite 27
Before reading, unfold the page containing the illustrations
and familiarise yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen
aus und machen Sie sich anschließend mit allen Funktionen
des Gerätes vertraut.

MODE/
+
MEM/AL
– +
AAA
+ −
AAA

IAN 312011
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com
Last Information Update · Stand der Informationen:
12/ 2018 · Ident.-No.: SSRM20A1-122018-1
6

SSRM 20 A1 GB│IE│NI │ 1 ■
Contents
Introduction.............................3
Information about these operating instructions......... 3
Intended use................................... 3
Warning notices ................................ 4
Safety .................................5
Basic safety instructions .......................... 5
Risk of hearing damage .......................... 7
Risk of accidents ............................... 7
Safety information for batteries .................... 8
Before use ..............................9
Check package contents ......................... 9
Description of components.......................10
Inserting/replacing the batteries ..................11
Connecting the earphones .......................11
Operation .............................12
Setting the time................................12
Switching the radio on/off .......................13
Adjusting the volume ...........................13
Automatic station search and storage ..............14
Manual station search ..........................15
Manual station selection ........................15
Storing stations manually ........................16
Calling up preset stations ........................16
IB_312011_SSRM20A1_LB6.indb 1 19.12.18 14:33

SSRM 20 A1
■ 2 │ GB│IE│NI
Sleep timer ...................................17
Setting alarm times .............................17
Activating/deactivating alarm functions.............18
Snooze function ...............................18
Troubleshooting ........................19
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Storage when not in use .................20
Disposal...............................20
Disposal of the device ..........................20
Battery disposal ...............................21
Disposal of packaging ..........................21
Appendix..............................22
Technical details ...............................22
Notes on the EU Declaration of Conformity..........23
Kompernass Handels GmbH warranty .............23
Service ......................................26
Importer .....................................26
IB_312011_SSRM20A1_LB6.indb 2 19.12.18 14:33

SSRM 20 A1 GB│IE│NI │ 3 ■
Introduction
Information about these operating
instructions
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating
instructions are part of this product. They contain important
information about safety, usage and disposal. Before using
the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for
the range of applications specified. Retain these instructions
for future reference. Please also pass these operating instruc-
tions on to any future owner.
Intended use
This radio is an electronic entertainment device.
It receives FM radio stations and functions as an alarm clock.
The device is not intended for any other purpose, nor for use
beyond the scope described. No claims of any kind will be
accepted for damage arising as a result of incorrect use. The
risk is borne solely by the user.
IB_312011_SSRM20A1_LB6.indb 3 19.12.18 14:33

SSRM 20 A1
■ 4 │ GB│IE│NI
Warning notices
The following warning symbols are used in these operating
instructions:
DANGER
A warning notice at this hazard level indicates
an imminently hazardous situation.
Failure to avoid this hazardous situation could result in
serious injuries or even death.
► Follow the instructions in this warning notice to avoid
the risk of serious injuries or death.
CAUTION
A warning notice at this hazard level indicates
a risk of property damage.
Failure to avoid this situation could result in property
damage.
► Follow the instructions in this warning notice to prevent
property damage.
NOTE
► A note provides additional information that makes
handling the device easier for you.
IB_312011_SSRM20A1_LB6.indb 4 19.12.18 14:33

SSRM 20 A1 GB│IE│NI │ 5 ■
Safety
This section contains important safety instructions for hand-
ling the device. This device complies with statutory safety
regulations. Improper use may result in personal injury and
property damage.
Basic safety instructions
■ Check the device for visible external damage before
use. Do not operate a device that has been damaged or
dropped.
■ This device may be used by children aged 8 years and
above and by persons with limited physical, sensory or
mental capabilities, or lack of experience and knowledge,
provided that they are under supervision or have been
told how to use the device safely and are aware of the
potential risks. Children must not play with the device.
Cleaning and user maintenance tasks must not be carried
out by children unless they are supervised.
■DANGER! Do not allow children to play with the
packaging material! Keep all packaging materials away
from children. There is a risk of suffocation!
■ Do not expose the device to direct sunlight or high tempera-
tures. Otherwise it may overheat and be irreparably
damaged.
■ Do not place the product near heat sources such as radiators
or other heat-generating appliances.
IB_312011_SSRM20A1_LB6.indb 5 19.12.18 14:33

SSRM 20 A1
■ 6 │ GB│IE│NI
■ Keep the device away from open flames (e.g. candles) at
all times.
■ It is not suitable for use in rooms with high temperature or
humidity (e.g.bathrooms) or excessive quantities of dust.
■ Never expose the device to extreme heat. This particularly
applies to storage in a car. Extreme temperatures can
occur in car interiors and glove compartments during long
periods of immobilisation. Remove electrical and electronic
devices from the vehicle.
■ Do not use the device immediately after moving it from a
cold room to a warm room. Always allow the device to
acclimatise before turning it on.
■ Never open the device housing.
None of the components in the device can be serviced
or replaced by the user.
■ Do not make any unauthorised modifications or altera-
tions to the device.
■ All repairs must be carried out by authorised specialist
companies or by the customer service department.
Improper repairs may put the user at risk. They will also
invalidate any warranty claims.
■ Do not expose the device to water spray or dripping
water, and do not place liquid-filled objects such as
vases or open drink containers on or near the device.
■ Switch the device off immediately and remove the batteries
if you notice a smell of burning or smoke. Have the device
checked by a qualified specialist before using it again.
IB_312011_SSRM20A1_LB6.indb 6 19.12.18 14:33

SSRM 20 A1 GB│IE│NI │ 7 ■
Risk of hearing damage
DANGER
Loud music can lead to hearing damage.
► Avoid extreme sound levels, especially over long
periods of time, when you are using earphones.
► Always use the supplied earphones (type SSRM
20 A1). Different earphones can generate hazardous
sound pressure.
► Do not use the supplied earphones (type SSRM
20 A1) with other playback devices.
Risk of accidents
DANGER
Risk of impaired perception!
► Acoustic warning and indication signals and ambient
noise can sound different while you are wearing these
headphones. Make yourself aware of how these
signals deviate in their sound so that you can recognise
the signals in the appropriate situations.
► Do not use the headphones while driving a vehicle,
riding a bicycle, operating machinery or in any other
situation in which impaired perception of ambient noise
could put you or other people in danger. Please also
observe the statutory provisions and regulations of the
country in which you are using the headphones.
IB_312011_SSRM20A1_LB6.indb 7 19.12.18 14:33

SSRM 20 A1
■ 8 │ GB│IE│NI
Safety information for batteries
DANGER
Mishandling the batteries can cause fires,
explosions, leakages or other hazards!
► Keep batteries out of the hands of children.
Store batteries out of the reach of children.
► If a battery has been swallowed, seek medical
assistance immediately.
► Batteries must never be short-circuited, taken apart,
deformed or thrown into a fire.
► Never try to charge non-rechargeable batteries.
► Chemicals from leaking or damaged batteries can
cause skin irritations when touched, so please use
suitable protective gloves if this occurs. In event of
contact with your skin, rinse off with plenty of water.
If the chemicals come into contact with your eyes, rinse
thoroughly with plenty of water, do not rub and consult
a doctor immediately.
► Always use batteries of the same type! Never mix old
batteries with new ones!
► Only ever use the stated battery type.
► Ensure that the batteries are inserted with the correct
polarity. This is indicated in the battery compartment.
► Clean the battery and device contacts before inserting
the batteries if necessary.
IB_312011_SSRM20A1_LB6.indb 8 19.12.18 14:33

SSRM 20 A1 GB│IE│NI │ 9 ■
DANGER
► Remove the batteries if you do not intend to use the
device for a long time.
► Always remove discharged batteries from the device
immediately.
Before use
Check package contents
(See fold-out page for illustrations)
The product includes the following components:
▯ Portable FM Radio SSRM 20 A1
▯ Earphones (type SSRM 20 A1)
▯ 2 x 1.5 V batteries (type AAA)
▯ These operating instructions
♦ Remove all parts of the device from the packaging and
remove all packaging materials.
NOTE
► Check the package for completeness and signs of
visible damage.
► If the delivery is incomplete or damage has occurred
as a result of defective packaging or during transport,
contact the Service hotline (see Service chapter).
IB_312011_SSRM20A1_LB6.indb 9 19.12.18 14:33

SSRM 20 A1
■ 10 │ GB│IE│NI
Description of components
(See fold-out page for illustrations)
Display
"−" button
MODE/ button
"+" button
Carrying strap
button
MEM/AL button
Headphone socket
Battery compartment cover
Batteries
Earphones (type SSRM 20 A1)
Operating instructions
IB_312011_SSRM20A1_LB6.indb 10 19.12.18 14:33

SSRM 20 A1 GB│IE│NI │ 11 ■
Inserting/replacing the batteries
♦ Open the battery compartment on the rear of the device
by sliding the battery compartment cover towards the
arrow.
♦ Remove any depleted batteries and insert two new type
AAA batteries into the battery compartment. Be sure to
insert the batteries with the correct polarity.
♦ Slide the battery compartment cover back on to the
battery compartment until it clicks into place.
NOTE
► When the batteries are depleted, the battery symbol
is shown on the display . Replace them as soon
as possible.
► Note that all settings (time, alarms, stored stations) are
reset when you change the batteries.
Connecting the earphones
♦ Insert the 3.5 mm jack plug of the supplied headphones
fully into the headphone socket on the side of the
device.
IB_312011_SSRM20A1_LB6.indb 11 19.12.18 14:33

SSRM 20 A1
■ 12 │ GB│IE│NI
Operation
Setting the time
NOTE
► You can only set the time when no alarm is active.
► If you do not press any buttons for approximately
5 seconds, the device exits the settings mode.
All changed settings are saved.
► You can also hold the "‒" or "+" button to scroll
quickly through the numbers.
► If you select the 12-hour format in the basic settings,
the
abbreviation PM is displayed in front of the time
between noon and midnight. The abbreviation AM is
displayed between midnight and noon.
♦ When the device is switched off, press the MODE/ but-
ton . The display will show the current time format
(or ) in flashing digits.
♦ Press the "‒" or "+" button, to set your preferred
format.
♦ Press the MODE/ button to save your settings.
The hours flash on the display .
♦ Press "‒" or "+" to set the required value.
♦ Press the MODE/ button to save your settings.
The minutes flash on the display .
♦ Press "‒" or "+" to set the required value.
♦ Press the MODE/ button to save your settings.
The display now shows the set time.
IB_312011_SSRM20A1_LB6.indb 12 19.12.18 14:33

SSRM 20 A1 GB│IE│NI │ 13 ■
Switching the radio on/off
♦ Press the button briefly to switch on the radio.
The display briefly shows and then the current
frequency.
♦ Briefly press the button again to switch the radio
off. The display briefly shows and then the current
time.
Adjusting the volume
You can set a volume between and . The default setting
is .
♦ Press "‒" or "+" while the radio is playing to set
your preferred volume. VOLUME will also appear on the
display .
♦ If you set the volume to or higher, the display will
show a flashing warning symbol . Briefly press the
MODE/ button to increase the volume further
using the "+" button.
NOTE
► If you do not press any buttons for approximately
3 seconds, the display returns to showing the
current frequency.
► If you switch the radio off with the volume between
and , it will remain at when you switch it on again.
► The volume setting does not affect the volume of the
alarm sound. The alarm volume is always the same.
IB_312011_SSRM20A1_LB6.indb 13 19.12.18 14:33

SSRM 20 A1
■ 14 │ GB│IE│NI
Automatic station search and storage
NOTE
► To receive radio stations, you must connect the supplied
earphones . They function as a receiver antenna.
► Note that the automatic station search overwrites
stations that have already been stored.
♦ While the radio is on, press the MODE/ button
for about 2 seconds to start the automatic station search.
The automatic station search always starts at the lowest
frequency (87.5 MHz).
The radio now scans the whole frequency range (87.5–
108 MHz) for stations with a strong signal. SCAN flashes
on the display .
When the radio detects a station, the display shows you the
station preset used (e.g. ) and the symbol goes
out briefly. As soon as you store the first detected station,
PRESET will be shown on the display permanently. The
detected stations are stored in the spaces to . Once
the entire frequency range has been scanned and all the
station presets have been filled, the automatic station search
is finished and the station saved in preset is played.
♦ Press any button to terminate the search before it is
finished.
IB_312011_SSRM20A1_LB6.indb 14 19.12.18 14:33

SSRM 20 A1 GB│IE│NI │ 15 ■
Manual station search
♦ While the radio is on, briefly press the MODE/ button
to switch to the search mode. The symbol flashes on
the display .
♦ Press the "‒" or "+" button for about 2 seconds
to start the manual station search either downwards or
upwards. As soon as the radio detects a station with a
strong signal, the search stops and the station plays.
♦ To search for another station, press the "‒" or "+"
button for about 2 seconds again. The radio will search
for the next station with a strong signal.
♦ Press the
MODE/ button to leave the search mode.
The symbol will light up permanently again.
Manual station selection
As an alternative to the automatic or manual station search,
you can set stations manually. This also allows you to find
stations with a weaker signal.
♦ While the radio is on, briefly press the MODE/ button
to switch to the search mode. The symbol flashes on
the display .
♦ Briefly press "‒" or "+" to scroll through the frequency
band. Each press of the button will scroll down or up by
0.05MHz.
♦ Continue until you have found the desired station.
♦ Press the MODE/ button to leave the search mode.
The symbol will light up permanently again.
IB_312011_SSRM20A1_LB6.indb 15 19.12.18 14:33

SSRM 20 A1
■ 16 │ GB│IE│NI
Storing stations manually
You can store up to 20 stations or frequencies in the radio
memory.
♦ While the radio is on, briefly press the MODE/ button
to switch to the search mode. The symbol flashes on
the display .
♦ Select a station to store.
♦ Press the MEM/AL button and hold it until the display
reads PRESET.
♦ Use the "‒" or "+" button to select a station preset
between and .
♦ Briefly press the MEM/AL button . Once the display
returns to showing the frequency, the station has been
stored in the selected preset. This process overwrites the
station that was stored in the same space previously.
♦ Press the MODE/ button to exit this mode.
The symbol will light up permanently again.
Calling up preset stations
♦ While in radio mode, briefly press the MEM/AL button .
The most recently used station preset (e.g. ) is shown
on the display .
♦ Use the "‒" or "+" button to select a station preset
between and . After approx. 3 seconds, the
station stored in the preset will start playing.
IB_312011_SSRM20A1_LB6.indb 16 19.12.18 14:33