Simple BluJax User manual

a. Charge your BluJax using the USB charging cable included.
b. When connected to a USB power source, BT icon will glow
red while charging. When charging is complete, redLED light
will turn off.
a. After charging your BluJax, unplug it from the USB cable.
b. Enable your Bluetooth function on your smart device.
c. Turn on BluJax by pushing and holding the Bluetooth button for 3
seconds. BT icon will be blinking red and blue. Power is on.
d. Open the Bluetooth menu on your smartphone, and scan for
available Bluetooth accessories.
e. Choose “ISBT32R” from the list, and select “Connect”.
f. When a successful connection has been established, LED light will
change to a solid blue light.
TO PAIR ADDITIONAL DEVICES: Turn off Bluetooth on your first device
and repeat steps b-f. NOTE: You can store up to 5 devices in the
BluJax memory, but BluJax can only play two devices in tandem at
the same time.
.
3. Let’s go! Connect!
a. Plug BluJax into the vehicle’s AUX port.
b. Select the AUX input source on your radio to enjoy your music.
c. Use your phone to access your music.
To save battery life while not in use, press the control button
for 3 seconds to turn off BluJax.
Here is what you get
BluJax USB Charging Cable3.5mm Extension Cable
Control Button
Cha rge
Power
Pair
Plug into AUX
Push to Play
NEW
INSTRUCTION MANUAL
BluJax - ISBT32 Rev B
LED Indicator Guide
Paring mode: Flashing red and blue lights
Paired: Steady blue light
Low Battery: Flashing red light
Charging: Steady red light
Full battery: No light
4. Day to Day Operation
Press “PLAY” button to play
Press “PAUSE” button to pause
Press “FORWARD” button to skip track
Press “BACK” button to go back to beginning of track
Double click to go back to previous track
NENE
WW
Turning Off Your BluJax
1. Charge
2. Initial Pairing
NOTE: Make sure you are parked in a safe spot before installation
and whenever you are pairing your device. NEVER WHILE DRIVING.