Simpli Home WyndenHall AXCART45-FG User manual

ARTISAN / HOLDEN / STRATFORD
CHEST OF DRAWERS
MODEL # AXCART45-FG
1/22
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
®

2/22
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
®

3/22
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/22
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for
your particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
expand and contract.
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
• If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
• Dust with soft dry cloth.
• Do not use liquid or aerosol products.
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• For soil build-up, wipe with damp cloth & dry.
• Do not use abrasive cleaners.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
A
PARTS DESCRIPTION
TOP
QTY 1
RIGHT DIVIDER
QTY 1
SMALL DRAWER FRONT
QTY 2
TOP BACK PANEL
QTY 1
MIDDLE DRAWER FRONT
QTY 1
LEFT SIDE
QTY 1
LARGE DRAWER FRONT
QTY 3
MIDDLE FRAME
QTY 1
BOTTOM FRAME
QTY 1
B C
DL
G
E1
H
FR
I
5/22
LEFT DIVIDER
QTY 1
FL
RIGHT SIDE
QTY 1
DR
BOTTOM BACK PANEL
QTY 1
E2
Front / Avant
Front / Avant
Front
/
Avant
Front
/
Avant
Front
/ Avant
MODEL # AXCART45-FG

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
M
PARTS DESCRIPTION
N
LARGE DRAWER BOTTOM
QTY 3
MIDDLE DRAWER BACK
QTY 1
6/22
SMALL DRAWER BACK
QTY 2
MIDDLE DRAWER BOTTOM
QTY 1
SMALL DRAWER BOTTOM
QTY 2
OP
Q R
PLASTIC JOINING STRIP
QTY 1
LARGE DRAWER BACK
QTY 3
L
KR
RIGHT MIDDLE & SMALL
DRAWER SIDE
QTY 3
KL
LEFT MIDDLE & SMALL
DRAWER SIDE
QTY 3
RIGHT LARGE DRAWER SIDE
QTY 3
JR
LEFT LARGE DRAWER SIDE
QTY 3
JL
MODEL # AXCART45-FG

1
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
23
45
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
6
7/22
7
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
ALLEN KEY BOLT
M6 X 30 mm
QTY 18
ALLEN KEY SCREW
M6 X 30 mm
QTY 36
CAM LOCK PIN
CAM LOCK
QTY 24 SETS
HANDLE
M4 X 27 mm
QTY 6 SETS
ALLEN KEY
QTY 1
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 18
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25 - QTY 2
( )1 is extra
b. M4 X 15 - QTY 1
c. M4 X 25 - QTY 1
MODEL # AXCART45-FG

COMPONENTS – KEY DIAGRAM
8/22
DR
DL
FR
FL
KR
KL
KR
KL
JL
JR
E1
E2
Front
/
Avant
Front /
Avant
Front / Avant
Front / Avant
Front /
Avant
MODEL # AXCART45-FG

ASSEMBLY
1. Attach 4 Cam Lock Pins 3 to pre-drilled holes at back of Small Drawer Front I .
2. Align Cam Lock Pins with guide holes and attach Small Drawer Sides KL , KR .
3. Insert 2 Cam Locks 3 into guide holes on each Small Drawer Side KL , KR .
4. Use flathead screwdriver to secure Cam Locks.
1. Slide Small Drawer Bottom Q firmly into slots on Small Drawer Sides KL , KR and
Small Drawer Front I .
STEP 1
STEP 2
9/22
KR
KL
KR
KL
MODEL # AXCART45-FG

ASSEMBLY
1. Align Small Drawer Back N with Small Drawer Bottom Q and press firmly into slot .
2. Attach Drawer Back using 2 Allen Key Screws 2 through guide holes on each
Side KL , KR .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Small Drawer Front I .
STEP 3
STEP 4
10/22
NOTE: The screwdriver is not
included in the hardware pack.
Repeat Step 1-4 for the second small drawer .
KR
KL
MODEL # AXCART45-FG

ASSEMBLY
1. Attach 4 Cam Lock Pins 3 to pre-drilled holes at back of Middle Drawer Front H .
2. Align Cam Lock Pins with guide holes and attach Middle Drawer Sides KL , KR .
3. Insert 2 Cam Locks 3 into guide holes on each Middle Drawer Side KL , KR .
4. Use flathead screwdriver to secure Cam Locks.
1. Slide Middle Drawer Bottom P firmly into slots on Middle Drawer Sides KL , KR and
Middle Drawer Front H .
STEP 5
STEP 6
11/22
KR
KL
KR
KL
MODEL # AXCART45-FG

ASSEMBLY
1. Align Middle Drawer Back M with Middle Drawer Bottom P and press firmly into slot.
2. Attach Drawer Back using 2 Allen Key Screws 2 through guide holes on each
Side KL , KR .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Middle Drawer Front H .
STEP 7
STEP 8
NOTE: The screwdriver is not
included in the hardware pack.
12/22
KR
KL
MODEL # AXCART45-FG

ASSEMBLY
1. Attach 4 Cam Lock Pins 3 to pre-drilled holes at back of Large Drawer Front G .
2. Align Cam Lock Pins with guide holes and attach Large Drawer Sides JL , JR .
3. Insert 2 Cam Locks 3 into guide holes on each Large Drawer Side JL , JR .
4. Use flathead screwdriver to secure Cam Locks.
1. Slide Large Drawer Bottom O firmly into slots on Large Drawer Sides JL , JR and
Large Drawer Front G .
STEP 9
STEP 10
13/22
JR
JL
JR
JL
MODEL # AXCART45-FG

ASSEMBLY
1. Align Large Drawer Back L with Large Drawer Bottom O and press firmly into slot.
2. Attach Drawer Back using 2 Allen Key Screws 2 through guide holes on each
Side JL , JR .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Large Drawer Front G .
STEP 11
STEP 12
NOTE: The screwdriver is not
included in the hardware pack.
Repeat Step 1-4 for the other two large drawers.
14/22
JR
JL
MODEL # AXCART45-FG

ASSEMBLY
STEP 13
1. Attach Dividers FL , FR to Middle Frame C using 6 Allen Key Screws 2
( 3 Screws / each Divider ).
2. Use Allen Key 5 to tighten screws. Do not over-tighten.
15/22
FR
FL
Front
/
Avant
Front
/
Avant
MODEL # AXCART45-FG
Front
/ Avant

ASSEMBLY
STEP 14
1. Attach Middle Frame C and Bottom Frame B to Sides DL , DR using 12 Allen
Key Bolts 1 ( 6 Bolts / each Side ).
2. Use Allen Key 5 to tighten bolts. Do not over-tighten.
16/22
FR
FL
DR
DL
Front / Avant
Front
/ Avant
Front
/ Avant
MODEL # AXCART45-FG

Front
/ Avant
Front
/
Avant
ASSEMBLY
STEP 15
1. Attach Top A to Sides DL , DR using 6 Allen Key Bolts 1 ( 3 Bolts / each Side ).
2. Attach Top A to Dividers FL , FR using 6 Allen Key Screws 2 ( 3 Screws / each Divider ).
3. Use Allen Key 5 to tighten screws and bolts. Do not over-tighten.
17/22
DR
DLFR
FL
Front / Avant
Front
/
Avant
Front / Avant
Front
/ Avant
Front
/ Avant
MODEL # AXCART45-FG

ASSEMBLY
STEP 16
18/22
st
1. Attach the upper Back Panel E1 to back frame by using Phillips Screws 6 . Only 1 top
row of screws ( 5 screws ) to be screwed in advance.
2. Insert the lower Back Panel E2 into the slot of Plastic Joining Strip R .
3. Insert the entire set of Step 2 into bottom edge of upper Back Panel E1 and tighten
by screws 6 .
R
R
E1
E2 E2
E1
E2
Front / Avant
Front / Avant
Front /
Avant
Front
/ Avant
MODEL # AXCART45-FG

ASSEMBLY
STEP 17
19/22
1. Insert assembled drawers into glides on assembled chest.
MODEL # AXCART45-FG

20/22
7
7
FURNITURE TIP OVER RESTRAINT ASSEMBLY
STEP 18
NOTE: The screwdriver is not
included in the hardware pack.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
If the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.