Argos Wow Raye 322/5837 User manual

Wow Raye Wooden Table
Assembly Instructions - Please keep for future reference 322/5837
Issue 1 - 08/10/14
Width - 118cm
Depth - 75cm
Height - 73cm
345/6307
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800
Dimensions

1
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Unit weight: 12.5 kgs.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
Handy Hints
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the
bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.

2
Components - Parts
Components - Fittings
Please check you have all the parts listed below
Please check you have all the fittings listed below
Tools required
Table top
(118 x 75 x 9.5cm)
Stud bolt x 8
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
1Leg x 4
(4 x 4 x 71cm)
2
A
Insert nut x 4
B
Nut x 8
C
Washer x 8
D
Spring Washer x 8
E
Spanner x 1
F
Flathead screwdriver
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 640 0800

Attaching legs
Place the table top on
a flat protected surface.
Position the legs on
the table top as
shown. Insert the bolts
on the legs into holes on
table top and fix using
nuts , washers and
spring washers .
Tighten nuts using
spanner .
Carefully turn over the
table by holding the legs
and place on a firm
surface. At least 2 people
are required to lift this
table.
Assembly is complete.
3
Assembly Instructions
Step 1
Step 2
a: Attaching insert nut
Position the leg as
shown and insert the
insert nut into hole on
the top of leg.
b: Attaching bolt
Align the fixing holes on
the insert nut by turning it
using a flathead
screwdriver.
Then fix bolt into the
insert nut on leg as
shown.
Repeat this step to
assemble the other
legs.
A
A
A
A
A
B
B
B
a: b:
2
2
2
2
2
2
2
1
1
D
E
F
C
2
2
2
2
2
1
1
E
D
E
E
D
D
D
D
CE
D
D
C
E
D
C
E
D
C
C
C
EC
E
C
E
C
D
E
C
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800

4
Please note that the product you have purchased is a natural
living timber.
Just like nature itself, wood varies in shape and colour. Knots,
vein patterns, resin pockets and colour differences contribute to
giving the piece of furniture its beauty and form - a natural part of
solid wood.
Although the tree has been cut down and dried, it is still alive and
therefore will react to high and low temperatures, light, humidity,
drought and time.
In cold and dry periods, the wood contracts which may lead to
small cracks in the piece of furniture. The reverse happens in
warm and humid periods where the wood expands and this may
result in slight unevenness.
The colour of the wood also changes with time, particularly if the
furniture is placed in a light place. This is a natural process and
part of owning a piece of furniture made of solid wood.
Any flexing that has occurred during transport will re-correct itself
once this product is correctly assembled.
Tighten all joints of the furniture after six months.
Please keep these instructions in a safe place for future use.
Dear Customer