Sauder Office Works Affirm 426307 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Sauder.com
Share your journey!
English pg 1-14
Français pg 15-17
Español pg 18-20
Lot # 564043 04/26/21
Purchased: __________________
5-Shelf Bookcase
Classic Cherry finish | Model 426307
AFFIRM COLLECTION
How can we help you? To reach our customer service, visit sauder.com/commercial-oce/service
to chat with a live rep or email us.
Prefer the phone? Give us a ring at
877-996-7539 .
Our award-winning team is available Monday-Friday - 8:30 a.m. to 5 p.m. EST (except holidays).

Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
3
4
5
5-14
15-17
18-20
21-22
23
Nail Holder (provided)
426307 www.sauder.com/commercial-oce/servicePage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
C BOTTOM (1)
D ADJUSTABLE SHELF (3)
E BACK (1)
F TOP (1)
G FIXED SHELF (1)
A
B
C
D
E
F
G
D
D
426307www.sauder.com/commercial-oce/service Page 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
NAIL - 43
1N RUBBER SLEEVE - 12 2R
SHELF REST - 12
10R
TOUCH-UP PEN - 1
9M
36F TWIST-LOCK®FASTENER - 8
BLACK 7/8" LARGE HEAD SCREW - 2
17S 147S BLACK 2-9/16" FLAT HEAD SCREW - 4
FURNITURE TIPPING
RESTRAINT KIT - 1
97
426307 www.sauder.com/commercial-oce/servicePage 4

Hardware Usage Guide
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
2.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
1.
HOW TO USE A TWIST-LOCK®FASTENER
Step 1 Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
å Push six SAUDER TWIST-LOCK® FASTENERS (36F) into the large holes in the LEFT END (B) and FIXED SHELF (G).
36F
36F
2
Do not tighten the TWIST-LOCK® FASTENERS in this step.
B
G
Meet Parts (B and G). These components
have been engineered to be lighter,
stronger, faster… well ok. Not technically
faster. But definitely makes for a sturdier
5-shelf bookcase that’s easier to assemble
and friendlier to the environment.
426307www.sauder.com/commercial-oce/service Page 5

Step 2
B
G
2
å Fasten the FIXED SHELF (G) to the LEFT END (B).
Tighten two TWIST-LOCK® FASTENERS.
Surface with TWIST-LOCK® FASTENERS
Surface with TWIST-LOCK® FASTENERS
Notched edge
Some assembly
(and snacks) required.
426307 www.sauder.com/commercial-oce/servicePage 6

å Push two SAUDER TWIST-LOCK® FASTENERS (36F) into
the large holes in the RIGHT END (A).
å Fasten the RIGHT END (A) to the FIXED SHELF (G).
Tighten two TWIST-LOCK® FASTENERS.
Step 3 2
36F
A
A
G
Surface without TWIST-LOCK® FASTENERS
Notched edge
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Part (A). Another
sturdier, easier,
friendlier component!
426307www.sauder.com/commercial-oce/service Page 7

å Open the FURNITURE TIPPING RESTRAINT KIT (97) and
fasten the SAFETY STRAP to the TOP (F). Use the short
screw provided.
å NOTE: Position the SAFETY STRAP exactly as shown.
Step 4
F
Part (F). Another
sturdier, easier,
friendlier component!
Safety strap
97
426307 www.sauder.com/commercial-oce/servicePage 8

å Fasten the TOP (F) to the ENDS (A and B).
Tighten four TWIST-LOCK® FASTENERS.
Step 5
A
B
F
2
Surface without
safety strap
Notched edge
Now might be a
good time to refresh
your drink.
426307www.sauder.com/commercial-oce/service Page 9

å Fasten the BOTTOM (C) to the ENDS (A and B) as shown.
Use four BLACK 2-9/16" FLAT HEAD SCREWS (147S).
Step 6
Notched edge
C
C
A
B
BLACK 2-9/16" FLAT HEAD SCREW
(4 used in this step)
147S
Wrapped seam
426307 www.sauder.com/commercial-oce/servicePage 10