Simplicity Cold Frame User manual

Please note that this is a brand new instruction manual. If you find any mistakes or you think anything needs
improving then please email me at; [e-mail] or phone [phone]
Thank you for purchasing your new Simplicity cold frame. We recommend you familiarise yourself with the instructions and read all
safety information before you commence assembly. This instruction manual will also available online at
www.greenhousepeople.co.uk in our technical help section should you need to reprint it. Should you require any additional advice
you can always call us on 01782 388811.
Safety Warning
x Glass and aluminium can potentially cause injury. Please ensure you wear protective goggles, gloves, headgear and suitable foot-
wear when assembling and glazing the building.
x Please remember that glass is fragile and should be handled with extreme care. Always clear up and dispose of any breakages
immediately.
x In windy conditions please make sure that your cold frame is anchored down properly and that the vents are closed to minimise the
chances of damage!
Additional Considerations
x You will find it helpful to prepare a large, clean and clear area in which to work in. A garage floor or flat lawn area is ideal.
x Most parts are numbered and can be identified by a stamp or removable label. Alternatively, the components can be identified by
lengths detailed in the packing list (see diagram opposite).
x The 4’ cold frame is used primarily as an example throughout this manual. The 6’ components are referred to in each section and
they are fitted in a similar manner to the 4’.
Guarantee
x Your new Simplicity cold frame is guaranteed for 10 years against faulty manufacture of the framework. This does not include
glazing, moving parts, accidental damage or wind damage.

612mm
121
121
10mm

Part
num
REAR
Section
Size
(mm)
2
4
2
6
950 /
951
952 /
953
958
959
950 1240 1
951 1860 1
952 1240 1
953 1860 1
958 510 2
959 510 1 2
576 6 8
579 6 8
300 2
300 x 2
958

Part
num
FRONT
Section
Size
(mm)
2
4
2
6
954 /
955
960
961
954 /
955
950 /
951
Part
num
Section Size
(mm)
2
4
2
6
956 580 2
576 4
579 4
956
950 1240 1
951 1860 1
954 1240 1
955 1860 1
960 460 2
961 460 1 2
576 6 8
579 6 8
300 2
960

Part
num
Section Size
(mm)
2
4
2
6
957 574 2
576 4
579 4
Part
num
Section Size
(mm)
2
4
2
6
957
962 425 2 3
574 2 3
589 M6x24mm 2 3
586 4 6
962

2
4
2
6
Part
num
572 1 roll
Size (mm) 4’ 6’
6 8
A610 X 457 2 3
B610 X 508 2 3
CSee below 2
856 458
857 508 6 8
578
510 460
857 856

124
121
124
610 x 610
121
Part
num
Section Size
(mm)
2
4
2
6
121 612 2 3
123 612 2 3
124 610 4 6
858 588 4 6
D 610 X 610 (see diag) 2 3
576 8 12
579 8 12
572
Flip over
ready for
glazing!
121
124
121
124

123
610 x 610
858
858
124
124
121
123

2
4
2
6
Part
num
580 4 6
SLIDE IN VENTS FROM END

O7mm
573 x 4

No mm 4’ 6’
121 612 2 3
123 612 2 3
124 610 4 6
950 1240 2
951 1860 2
952 1240 1
953 1860 1
954 1240 1
955 1860 1
956 580 2 2
957 574 2 2
958 510 2 2
959 510 1 2
960 460 2 2
961 460 1 2
962 425 2 3
576 M6x10mm 28 36
579 M6 28 36
589 M6x24mm 2 3
586 4 6
574 2 3
300 4 4
580 4 6
856 458 6 8
857 508 6 8
858 588 4 6
572 15000 1 roll
573 4
1 roll
4