Simrad NSO evo3S User manual

| 1
NSO evo3S | Quick Guide - EN
NSO evo3S
Quick Guide
Front panel
B C
A
ATouch Screen
BPower key
• Press and hold: turns the unit ON/OFF
• Short press once: displays the System Controls dialog
• Repeat short presses: toggles through preset dimming levels
CWheel key - user configurable key. Refer to Operator manual.
Default without an autopilot connected to the system:
• Short press: toggles between panels on split screen
• Long press: maximizes active panel on split screen
Default with an autopilot connected to the system:
• Short press: opens the autopilot controller and puts the autopilot in standby
mode
• Long press: toggles between panels on split screen
EN
01_EN_988-12476-001

2|NSO evo3S | Quick Guide - EN
Home page
AB C D E
GF
A Application buttons
B Settings button
C Tools
D Favorites
E Close button
F Man Over Board (MOB)
button
G Power button
The MOB mark
To create a MOB mark: press the MOB button.
To stop displaying navigational information to the MOB waypoint: cancel the navigation
from the menu.
System Controls dialog
Used for quick access to system settings.
Activate the dialog by:
• Pressing the Power key
• Swiping from the top of the screen
¼Note: The content of the System Controls dialog
depends on connected equipment and active
panel.

| 3
NSO evo3S | Quick Guide - EN
Application pages
D
A
E
BCA Home/pages button
B Application panel
C Menu button
D Instrument bar
E Control bar
Adjust panel size
You can adjust the panel sizes in a split page.
1 Tap the adjust split button in the System Controls dialog to show the resize icon
2 Drag the resize icon to set preferred panel size
3 Save the changes by tapping the screen
Charts
• Zoom the chart by using spread or pinch
gestures or by using the zoom buttons.
• Move the view in any direction by panning
the chart.
• Display information about a chart item by
tapping the item.
Waypoints
To create a waypoint: select the new waypoint option in the menu.
¼Note: With cursor inactive, the waypoint is placed at vessel’s position. With cursor
active, the waypoint is placed at selected cursor position.

4|NSO evo3S | Quick Guide - EN
Echosounder
• Zoom the image by using the zoom
buttons.
• View echosounder history by panning the
image.
• Adjust gain and color using the slide bar in
the menu.
• Toggle auto gain ON/OFF from the menu.
Autopilot
• Activate the autopilot controller from the Control bar.
• Select an autopilot mode by pressing the mode button from
the Control bar.
• Switch to standby mode from the autopilot controller or by
using physical Standby key.
Radar
• Turn the radar transmitting ON/OFF from the
menu.
• Adjust radar range by using the zoom
buttons on the radar panel.
Product manuals
For the full Operator manual, technical specifications and declarations, refer to the
product website on: www.simrad-yachting.com