Simrad NSO24 evo3s User manual

| 1
NSO evo3S | Quick Guide - EN
NSO evo3S
Quick Guide
Front panel
B C
A
ATouch Screen
BPower key
•Press and hold: turns the unit ON/OFF
•Short press once: displays the System Controls dialog
•Repeat short presses: toggles through preset dimming levels
CWheel key - user configurable key. Refer to Operator manual.
Default without an autopilot connected to the system:
•Short press: toggles between panels on split screen
•Long press: maximizes active panel on split screen
Default with an autopilot connected to the system:
•Short press: opens the autopilot controller and puts the autopilot in standby
mode
•Long press: toggles between panels on split screen
EN
01_EN_988-12476-001

2|
Home page
AB C D E
GF
A Application buttons
B Settings button
C Tools
D Favorites
E Close button
F Man Over Board (MOB)
button
G Power button
The MOB mark
To create a MOB mark: press the MOB button.
To stop displaying navigational information to the MOB waypoint: cancel the navigation
from the menu.
System Controls dialog
Used for quick access to system settings.
Activate the dialog by:
•Pressing the Power key
•Swiping from the top of the screen
¼Note: The content of the System Controls dialog
depends on connected equipment and active
panel.

| 3
NSO evo3S | Quick Guide - EN
Application pages
D
A
E
BCA Home/pages button
B Application panel
C Menu button
D Instrument bar
E Control bar
Adjust panel size
You can adjust the panel sizes in a split page.
1 Tap the adjust split button in the System Controls dialog to show the resize icon
2 Drag the resize icon to set preferred panel size
3 Save the changes by tapping the screen
Charts
•Zoom the chart by using spread or pinch
gestures or by using the zoom buttons.
•Move the view in any direction by panning
the chart.
•Display information about a chart item by
tapping the item.
Waypoints
To create a waypoint: select the new waypoint option in the menu.
¼Note: With cursor inactive, the waypoint is placed at vessel’s position. With cursor
active, the waypoint is placed at selected cursor position.

Echosounder
•Zoom the image by using the zoom
buttons.
•View echosounder history by panning the
image.
•Adjust gain and color using the slide bar in
the menu.
•Toggle auto gain ON/OFF from the menu.
Autopilot
•Activate the autopilot controller from the Control bar.
•Select an autopilot mode by pressing the mode button from
the Control bar.
•Switch to standby mode from the autopilot controller or by
using physical Standby key.
Radar
•Turn the radar transmitting ON/OFF from the
menu.
•Adjust radar range by using the zoom
buttons on the radar panel.
Discover other marine GPS navigation on our website.